kconfig: introduce kconfig for UBI

[people/ms/u-boot.git] / include / configs / aristainetos-common.h

diff --git a/include/configs/aristainetos-common.h b/include/configs/aristainetos-common.h
index d44624d68b04e4c9b6a0da1b31da1ee3d50ffcd2..d6d9838858d997d44043a771706e97924265eecf 100644 (file)
--- a/include/configs/aristainetos-common.h
+++ b/include/configs/aristainetos-common.h
@@ -17,7 +17,6 @@
 
 #define CONFIG_MACH_TYPE       4501
 #define CONFIG_MMCROOT         "/dev/mmcblk0p1"
-#define PHYS_SDRAM_SIZE                (1u * 1024 * 1024 * 1024)
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (64 * SZ_1M)
@@ -26,16 +25,9 @@
 
 #define CONFIG_MXC_UART
 
-#define CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
@@ -45,19 +37,14 @@
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_MICREL
 
-#define CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_MTD
-#define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_MXC_SPI
-#define CONFIG_SF_DEFAULT_BUS          3
 #define CONFIG_SF_DEFAULT_SPEED                20000000
 #define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
 
 /* Command definition */
 #define CONFIG_CMD_BMODE
-#define CONFIG_CMD_SETEXPR
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "script=u-boot.scr\0" \
@@ -112,9 +99,6 @@
        "ubiboot=echo Booting from ubi ...; " \
                "run ubiargs addmtd addmisc set_fit_default;" \
                "bootm ${fit_addr_r}\0" \
-       "ubifs_load_fit=sf probe;ubi part ubi 2048;ubifsmount ubi:rootfs;" \
-               "ubifsload ${fit_addr_r} /boot/system.itb; " \
-               "imi ${fit_addr_r}\0 " \
        "rescueargs=setenv bootargs console=${console},${baudrate} " \
                "root=/dev/ram rw\0 " \
        "rescueboot=echo Booting rescue system from NOR ...; " \
@@ -193,14 +177,13 @@
 #define CONFIG_ENV_OFFSET              (0x0d0000)
 #define CONFIG_ENV_OFFSET_REDUND       (0x0e0000)
 
-#define CONFIG_CMD_CACHE
-
 #define CONFIG_SYS_FSL_USDHC_NUM       2
 
 /* I2C */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_SYS_I2C_SLAVE           0x7f
@@ -227,10 +210,8 @@
 #define CONFIG_CMD_DATE
 
 /* USB Configs */
-#define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
@@ -242,17 +223,11 @@
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_RBTREE
-#define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 
-#define CONFIG_MTD_UBI_FASTMAP
-#define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT     1
-
 #define CONFIG_HW_WATCHDOG
 #define CONFIG_IMX_WATCHDOG
 
-#define CONFIG_FIT
-
 /* Framebuffer */
 #define CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3