Convert CONFIG_SPL_LIBGENERIC_SUPPORT to Kconfig

[people/ms/u-boot.git] / include / configs / at91sam9m10g45ek.h

diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index 09d8bec0647736f50fe74f647117c207b68f3306..8741e97319b9d225bdbe51d7bc5207f562087153 100644 (file)
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -30,11 +30,6 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_DISPLAY_CPUINFO
 
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_OF_LIBFDT
-
-#define CONFIG_SYS_GENERIC_BOARD
-
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
 #define CONFIG_AT91_GPIO
@@ -64,7 +59,6 @@
 #define        CONFIG_RED_LED          AT91_PIN_PD31   /* this is the user1 led */
 #define        CONFIG_GREEN_LED        AT91_PIN_PD0    /* this is the user2 led */
 
-#define CONFIG_BOOTDELAY       3
 
 /*
  * BOOTP options
@@ -80,10 +74,7 @@
 
 /* No NOR flash */
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_USB
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS           1
@@ -109,7 +100,6 @@
 #endif
 
 /* MMC */
-#define CONFIG_CMD_MMC
 
 #ifdef CONFIG_CMD_MMC
 #define CONFIG_MMC
@@ -118,7 +108,6 @@
 #endif
 
 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 
@@ -133,7 +122,6 @@
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_ATMEL
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     2
-#define CONFIG_USB_STORAGE
 
 #define CONFIG_SYS_LOAD_ADDR           0x22000000      /* load address */
 
@@ -181,14 +169,11 @@
 
 #define CONFIG_BAUDRATE                        115200
 
-#define CONFIG_SYS_PROMPT              "U-Boot> "
 #define CONFIG_SYS_CBSIZE              256
 #define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
 
 /*
  * Size of malloc() pool
@@ -201,10 +186,7 @@
 #define CONFIG_SPL_MAX_SIZE            0x010000
 #define CONFIG_SPL_STACK               0x310000
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
 
 #define CONFIG_SYS_MONITOR_LEN         0x80000
 
@@ -221,8 +203,6 @@
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
 
 #elif CONFIG_SYS_USE_NANDFLASH
 #define CONFIG_SPL_NAND_SUPPORT
@@ -252,5 +232,4 @@
 #define CONFIG_SYS_MCKR                        0x1301
 #define CONFIG_SYS_MCKR_CSS            0x1302
 
-#define ATMEL_BASE_MPDDRC              ATMEL_BASE_DDRSDRC0
 #endif