]> git.ipfire.org Git - people/ms/u-boot.git/blobdiff - include/configs/da850evm.h
Merge tag 'xilinx-for-v2017.07' of git://www.denx.de/git/u-boot-microblaze
[people/ms/u-boot.git] / include / configs / da850evm.h
index 18a8e26a228f5ce87956ba75a35a26f88450ec87..b7199bb9e021fabd37870f6e69c7cfa749863af9 100644 (file)
 #define CONFIG_SYS_NS16550_COM1        DAVINCI_UART2_BASE /* Base address of UART2 */
 #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
 #define CONFIG_CONS_INDEX      1               /* use UART0 for console */
-#define CONFIG_BAUDRATE                115200          /* Default baud rate */
 
 #define CONFIG_SPI
 #define CONFIG_DAVINCI_SPI
 #ifdef CONFIG_USE_NAND
 #undef CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_NAND_DAVINCI
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENV_IS_IN_NAND          /* U-Boot env in NAND Flash  */
 #define CONFIG_ENV_OFFSET              0x0 /* Block 0--not used by bootcode */
 #define CONFIG_ENV_SIZE                        (128 << 10)
 #define CONFIG_ENV_SIZE                        (64 << 10)
 #define CONFIG_ENV_OFFSET              (512 << 10)
 #define CONFIG_ENV_SECT_SIZE           (64 << 10)
-#define CONFIG_SYS_NO_FLASH
 #endif
 
 /*
  * U-Boot general configuration
  */
 #define CONFIG_MISC_INIT_R
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOOTFILE                "uImage" /* Boot file name */
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
 #define CONFIG_MX_CYCLIC
 
 /*
 /*
  * U-Boot commands
  */
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_DIAG
 #define CONFIG_CMD_SAVES
 
 #ifdef CONFIG_CMD_BDI
        !defined(CONFIG_USE_NOR) && \
        !defined(CONFIG_USE_SPIFLASH)
 #define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENV_SIZE                (16 << 10)
-#undef CONFIG_CMD_ENV
-#endif
-
-/* SD/MMC configuration */
-#ifndef CONFIG_USE_NOR
-#define CONFIG_MMC
-#define CONFIG_DAVINCI_MMC_SD1
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DAVINCI_MMC
-#endif
-
-/*
- * Enable MMC commands only when
- * MMC support is present
- */
-#ifdef CONFIG_MMC
-#define CONFIG_DOS_PARTITION
 #endif
 
 #ifndef CONFIG_DIRECT_NOR_BOOT
 /* defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_SPL_MALLOC_START    (CONFIG_SYS_TEXT_BASE - \
                                                CONFIG_SYS_MALLOC_LEN)
 #define CONFIG_SYS_SPL_MALLOC_SIZE     CONFIG_SYS_MALLOC_LEN
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
                                        GENERATED_GBL_DATA_SIZE)
 #endif /* CONFIG_DIRECT_NOR_BOOT */
+
+#include <asm/arch/hardware.h>
+
 #endif /* __CONFIG_H */