configs: Re-sync HUSH options

[people/ms/u-boot.git] / include / configs / ethernut5.h

diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index 480d8678c6f8f2756313ed86ff2271ff30441125..06061944cc34608398d5027d29e0d24ce3580e4a 100644 (file)
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -12,6 +12,7 @@
 
 #include <asm/hardware.h>
 
+
 /* The first stage boot loader expects u-boot running at this address. */
 #define CONFIG_SYS_TEXT_BASE   0x27000000      /* 16MB available */
 
@@ -23,8 +24,6 @@
 #define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5
 
 /* CPU information */
-#define CONFIG_ARM926EJS
-#define CONFIG_AT91FAMILY
 #define CONFIG_DISPLAY_CPUINFO         /* Display at console. */
 #define CONFIG_ARCH_CPU_INIT
 
@@ -60,8 +59,6 @@
 /* 512kB DataFlash at NPCS0 */
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
 #define CONFIG_HAS_DATAFLASH
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_ATMEL
 #define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0    0xC0000000
 #define DATAFLASH_TCSS                 (0x1a << 16)
@@ -78,7 +75,6 @@
 
 /* SPI */
 #define CONFIG_ATMEL_SPI
-#define CONFIG_SYS_SPI_WRITE_TOUT      (5 * CONFIG_SYS_HZ)
 #define AT91_SPI_CLK                   15000000
 
 /* Serial port */
@@ -92,29 +88,13 @@
 #define CONFIG_AT91_GPIO
 
 /* Command line configuration */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
-
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_SPI
 
-#ifdef MINIMAL_LOADER
-#undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_EDITENV
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_ITEST
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_SETGETDCR
-#undef CONFIG_CMD_XIMG
-#else
+#ifndef MINIMAL_LOADER
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_CACHE
@@ -130,7 +110,6 @@
 #define CONFIG_CMD_RARP
 #define CONFIG_CMD_REISER
 #define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_SF
 #define CONFIG_CMD_SNTP
 #define CONFIG_CMD_UBI
@@ -154,7 +133,6 @@
 
 /* JFFS2 */
 #ifdef CONFIG_CMD_JFFS2
-#define CONFIG_MTD_NAND_ECC_JFFS2
 #define CONFIG_JFFS2_CMDLINE
 #define CONFIG_JFFS2_NAND
 #endif
@@ -257,8 +235,6 @@
 #endif
 
 /* Misc. u-boot settings */
-#define CONFIG_SYS_PROMPT              "U-Boot> "
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_CBSIZE              256
 #define CONFIG_SYS_MAXARGS             16
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + 16 \