Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / imx27lite-common.h

diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h
index 526659c97857f27cf5697368f20d8697f2247ece..dca910f23cd9f5744a33fbb8ad87fd595b11185b 100644 (file)
--- a/include/configs/imx27lite-common.h
+++ b/include/configs/imx27lite-common.h
@@ -16,11 +16,6 @@
 #define CONFIG_MX27
 #define CONFIG_MX27_CLK32      32768           /* OSC32K frequency */
 
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_SYS_TEXT_BASE           0xc0000000
-
 #define CONFIG_CMDLINE_TAG             1       /* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS       1
 #define CONFIG_INITRD_TAG              1
@@ -88,12 +83,10 @@
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE   UART1_BASE
 #define CONFIG_CONS_INDEX      1               /* use UART0 for console */
-#define CONFIG_BAUDRATE                115200          /* Default baud rate */
 
 /*
  * Flash & Environment
  */
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
 /* Use buffered writes (~10x faster) */
@@ -130,59 +123,18 @@
 /*
  * NAND
  */
-#define CONFIG_NAND_MXC
 #define CONFIG_MXC_NAND_REGS_BASE      0xd8000000
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0xd8000000
 #define CONFIG_JFFS2_NAND
 #define CONFIG_MXC_NAND_HWECC
 
-/*
- * SD/MMC
- */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MXC_MMC
-#define CONFIG_DOS_PARTITION
-
-/*
- * GPIO
- */
-#define CONFIG_MXC_GPIO
-
-/*
- * MTD partitions
- */
-#define CONFIG_CMD_MTDPARTS
-
 /*
  * U-Boot general configuration
  */
 #define CONFIG_SYS_CBSIZE      1024    /* Console I/O Buffer Size  */
-/* Print buffer sz */
-#define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE + \
-               sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-
-/*
- * U-Boot commands
- */
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_PING
-
-#define CONFIG_BOOTDELAY       5
 
 #define CONFIG_LOADADDR                0xa0800000      /* loadaddr env var */
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
@@ -213,8 +165,8 @@
                " +${filesize};cp.b ${fileaddr} "                       \
                __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"   \
        "upd=run load update\0"                                         \
-       "mtdids=" MTDIDS_DEFAULT "\0"                                   \
-       "mtdparts=" MTDPARTS_DEFAULT "\0"                               \
+       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0"                                    \
+       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"                                \
 
 /* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1