Kconfig: Finish migration of hashing commands

[people/ms/u-boot.git] / include / configs / ipam390.h

diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h
index 37a5fa40f19b0b735126e2f771066ac413283aa7..127e7e73962246831f68d26d2ac8984c9b977dba 100644 (file)
--- a/include/configs/ipam390.h
+++ b/include/configs/ipam390.h
@@ -32,8 +32,6 @@
 #define CONFIG_SYS_OSCIN_FREQ          24000000
 #define CONFIG_SYS_TIMERBASE           DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK            clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_DA850_PLL_INIT
-#define CONFIG_SYS_DA850_DDR_INIT
 #define CONFIG_SYS_TEXT_BASE           0xc1080000
 
 /*
@@ -136,13 +134,11 @@
 #define CONFIG_SYS_NS16550_COM1        DAVINCI_UART0_BASE /* Base address of UART0 */
 #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
 #define CONFIG_CONS_INDEX      1               /* use UART0 for console */
-#define CONFIG_BAUDRATE                115200          /* Default baud rate */
 
 /*
  * Flash & Environment
  */
 #define CONFIG_NAND_DAVINCI
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENV_IS_IN_NAND          /* U-Boot env in NAND Flash  */
 #define CONFIG_ENV_OFFSET              0x0 /* Block 0--not used by bootcode */
 #define CONFIG_ENV_SIZE                        (128 << 10)
@@ -178,7 +174,6 @@
 #define CONFIG_SYS_NAND_ECCSIZE                512
 #define CONFIG_SYS_NAND_ECCBYTES       10
 #define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
@@ -201,7 +196,6 @@
  * U-Boot general configuration
  */
 #define CONFIG_MISC_INIT_R
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOOTFILE                "uImage" /* Boot file name */
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
@@ -211,7 +205,6 @@
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
 #define CONFIG_MX_CYCLIC
 
 /*
@@ -247,8 +240,6 @@
 /*
  * U-Boot commands
  */
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_DIAG
 #define CONFIG_CMD_SAVES
 
 #ifdef CONFIG_CMD_BDI
@@ -266,7 +257,6 @@
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_LZO
 #define CONFIG_RBTREE
-#define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 
 #define MTDIDS_NAME_STR                "davinci_nand.0"
@@ -281,13 +271,9 @@
 
 /* defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_SPL_MALLOC_START    (CONFIG_SYS_TEXT_BASE - \
                                                CONFIG_SYS_MALLOC_LEN)
 #define CONFIG_SYS_SPL_MALLOC_SIZE     CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_LDSCRIPT    "board/$(BOARDDIR)/u-boot-spl-ipam390.lds"
 #define CONFIG_SPL_STACK       0x8001ff00
 #define CONFIG_SPL_TEXT_BASE   0x80000000
@@ -302,14 +288,12 @@
 
 /* add FALCON boot mode */
 #define CONFIG_CMD_SPL
-#define CONFIG_SPL_OS_BOOT
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS        0x00200000
 #define CONFIG_SYS_SPL_ARGS_ADDR       LINUX_BOOT_PARAM_ADDR
 #define CONFIG_CMD_SPL_NAND_OFS                0x00180000
 #define CONFIG_CMD_SPL_WRITE_SIZE      0x400
 
 /* GPIO support */
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_DA8XX_GPIO
 #define CONFIG_IPAM390_GPIO_BOOTMODE   ((16 * 7) + 14)