MIPS: add BMIPS Netgear CG3100D board

[people/ms/u-boot.git] / include / configs / ls1012ardb.h

diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h
index f63c66a8d99c98b2ccb2695fe83f69a3da4d804e..276fe1050cf9de85cb90efc7b1ecbeae4d1b1b44 100644 (file)
--- a/include/configs/ls1012ardb.h
+++ b/include/configs/ls1012ardb.h
@@ -9,15 +9,11 @@
 
 #include "ls1012a_common.h"
 
-
+/* DDR */
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_CHIP_SELECTS_PER_CTRL   1
 #define CONFIG_NR_DRAM_BANKS           2
 #define CONFIG_SYS_SDRAM_SIZE          0x40000000
-
-#define CONFIG_SYS_MMDC_CORE_CONTROL_1         0x05180000
-#define CONFIG_SYS_MMDC_CORE_CONTROL_2         0x85180000
-
 #define CONFIG_CMD_MEMINFO
 #define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START       0x80000000
@@ -29,12 +25,9 @@
 #define CONFIG_HAS_FSL_XHCI_USB
 
 #ifdef CONFIG_HAS_FSL_XHCI_USB
-#define CONFIG_USB_XHCI
 #define CONFIG_USB_XHCI_FSL
-#define CONFIG_USB_XHCI_DWC3
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         1
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
-#define CONFIG_USB_STORAGE
 #endif
 
 /*
@@ -51,12 +44,9 @@
 #define __SW_REV_B             0xF0
 
 /*  MMC  */
-#define CONFIG_MMC
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #endif
 
 /* SATA */
@@ -65,8 +55,6 @@
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_CMD_SCSI
-#define CONFIG_DOS_PARTITION
-#define CONFIG_BOARD_LATE_INIT
 
 #define CONFIG_SYS_SATA                                AHCI_BASE_ADDR
 
@@ -74,28 +62,10 @@
 #define CONFIG_SYS_SCSI_MAX_LUN                        1
 #define CONFIG_SYS_SCSI_MAX_DEVICE             (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
                                                CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_PCI             /* Enable PCI/PCIE */
-#define CONFIG_PCIE1           /* PCIE controller 1 */
-#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
-#define FSL_PCIE_COMPAT "fsl,ls1043a-pcie"
-
-#define CONFIG_SYS_PCI_64BIT
 
-#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF  0x00000000
-#define CONFIG_SYS_PCIE_CFG0_SIZE      0x00001000      /* 4k */
-#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF  0x00001000
-#define CONFIG_SYS_PCIE_CFG1_SIZE      0x00001000      /* 4k */
-
-#define CONFIG_SYS_PCIE_IO_BUS         0x00000000
-#define CONFIG_SYS_PCIE_IO_PHYS_OFF    0x00010000
-#define CONFIG_SYS_PCIE_IO_SIZE                0x00010000      /* 64k */
-
-#define CONFIG_SYS_PCIE_MEM_BUS         0x08000000
-#define CONFIG_SYS_PCIE_MEM_PHYS_OFF    0x04000000
-#define CONFIG_SYS_PCIE_MEM_SIZE        0x80000000      /* 128M */
+#define CONFIG_PCIE1           /* PCIE controller 1 */
 
 #define CONFIG_NET_MULTI
-#define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_CMD_PCI
 
@@ -104,4 +74,7 @@
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         0x9fffffff
 
+
+#include <asm/fsl_secure_boot.h>
+
 #endif /* __LS1012ARDB_H__ */