Merge git://git.denx.de/u-boot-fsl-qoriq

[people/ms/u-boot.git] / include / configs / ls1046ardb.h

diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index 693cc8d87fb32aa228486eaaf63c7c8116e6b361..2141b8299aa4328829c693601fe57040e1082147 100644 (file)
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -9,20 +9,6 @@
 
 #include "ls1046a_common.h"
 
-#if defined(CONFIG_FSL_LS_PPA)
-#define CONFIG_ARMV8_PSCI
-#define CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
-#define CONFIG_SYS_LS_PPA_DRAM_BLOCK_MIN_SIZE          (1UL * 1024 * 1024)
-
-#define CONFIG_SYS_LS_PPA_FW_IN_XIP
-#ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP
-#define        CONFIG_SYS_LS_PPA_FW_ADDR       0x40500000
-#endif
-#endif
-
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
 #ifdef CONFIG_SD_BOOT
 #define CONFIG_SYS_TEXT_BASE           0x82000000
 #else
@@ -48,7 +34,9 @@
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 #define CONFIG_FSL_DDR_BIST    /* enable built-in memory test */
+#ifndef CONFIG_SPL
 #define CONFIG_FSL_DDR_INTERACTIVE     /* Interactive debugging */
+#endif
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1046ardb/ls1046ardb_pbi.cfg
@@ -63,9 +51,6 @@
 #endif
 #endif
 
-/* No NOR flash */
-#define CONFIG_SYS_NO_FLASH
-
 /* IFC */
 #define CONFIG_FSL_IFC
 
@@ -167,6 +152,12 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
 #define I2C_RETIMER_ADDR                       0x18
 
+/* PMIC */
+#define CONFIG_POWER
+#ifdef CONFIG_POWER
+#define CONFIG_POWER_I2C
+#endif
+
 /*
  * Environment
  */
@@ -214,13 +205,23 @@
 #define CONFIG_SPI_FLASH_BAR
 #endif
 
+/* USB */
+#define CONFIG_HAS_FSL_XHCI_USB
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_XHCI_HCD
+#define CONFIG_USB_XHCI_FSL
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_USB_MAX_CONTROLLER_COUNT         3
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#endif
+
 /* SATA */
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SCSI
-#define CONFIG_DOS_PARTITION
-#define CONFIG_BOARD_LATE_INIT
 
 #define CONFIG_SYS_SATA                                AHCI_BASE_ADDR
 
@@ -228,6 +229,7 @@
 #define CONFIG_SYS_SCSI_MAX_LUN                        1
 #define CONFIG_SYS_SCSI_MAX_DEVICE             (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
                                                CONFIG_SYS_SCSI_MAX_LUN)
+
 #define CONFIG_BOOTCOMMAND             "sf probe 0:0;sf read $kernel_load" \
                                        "$kernel_start $kernel_size;" \
                                        "bootm $kernel_load"