ls1088a: Add VID support for QDS and RDB platforms

[people/ms/u-boot.git] / include / configs / ls1088aqds.h

diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index e7e3afefd9a8fbd2d5912f93112d2a3fc4998f54..bf76ed4d25c09d4d222feee00b5a7ebc96d2d91f 100644 (file)
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -21,7 +21,6 @@ unsigned long get_board_ddr_clk(void);
 
 #if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_ENV_SIZE                        0x2000          /* 8KB */
-#define CONFIG_ENV_OFFSET              0x300000        /* 3MB */
 #define CONFIG_ENV_SECT_SIZE           0x40000
 #elif defined(CONFIG_SD_BOOT)
 #define CONFIG_ENV_OFFSET              (3 * 1024 * 1024)
@@ -280,6 +279,33 @@ unsigned long get_board_ddr_clk(void);
 #define I2C_MUX_CH_DEFAULT             0x8
 #define I2C_MUX_CH5                    0xD
 
+#define I2C_MUX_CH_VOL_MONITOR          0xA
+
+/* Voltage monitor on channel 2*/
+#define I2C_VOL_MONITOR_ADDR           0x63
+#define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
+#define I2C_VOL_MONITOR_BUS_V_OVF      0x1
+#define I2C_VOL_MONITOR_BUS_V_SHIFT    3
+#define I2C_SVDD_MONITOR_ADDR           0x4F
+
+#define CONFIG_VID_FLS_ENV              "ls1088aqds_vdd_mv"
+#define CONFIG_VID
+
+/* The lowest and highest voltage allowed for LS1088AQDS */
+#define VDD_MV_MIN                     819
+#define VDD_MV_MAX                     1212
+
+#define CONFIG_VOL_MONITOR_LTC3882_SET
+#define CONFIG_VOL_MONITOR_LTC3882_READ
+
+/* PM Bus commands code for LTC3882*/
+#define PMBUS_CMD_PAGE                  0x0
+#define PMBUS_CMD_READ_VOUT             0x8B
+#define PMBUS_CMD_PAGE_PLUS_WRITE       0x05
+#define PMBUS_CMD_VOUT_COMMAND          0x21
+
+#define PWM_CHANNEL0                    0x0
+
 /*
 * RTC configuration
 */