configs: Re-sync with cmd/Kconfig

[people/ms/u-boot.git] / include / configs / ls2080ardb.h

diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 116dbcde5b7921fff5712707123e99c0dba10b94..5bec5099af78b463b9dfe6315b9726ebdbf2a20c 100644 (file)
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -14,6 +14,22 @@
 
 #define CONFIG_DISPLAY_BOARDINFO
 
+#define I2C_MUX_CH_VOL_MONITOR         0xa
+#define I2C_VOL_MONITOR_ADDR           0x38
+#define CONFIG_VOL_MONITOR_IR36021_READ
+#define CONFIG_VOL_MONITOR_IR36021_SET
+
+#define CONFIG_VID_FLS_ENV             "ls2080ardb_vdd_mv"
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_VID
+#endif
+/* step the IR regulator in 5mV increments */
+#define IR_VDD_STEP_DOWN               5
+#define IR_VDD_STEP_UP                 5
+/* The lowest and highest voltage allowed for LS2080ARDB */
+#define VDD_MV_MIN                     819
+#define VDD_MV_MAX                     1212
+
 #ifndef __ASSEMBLY__
 unsigned long get_board_sys_clk(void);
 #endif
@@ -47,8 +63,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_CMD_SCSI
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
 #define CONFIG_DOS_PARTITION
 #define CONFIG_BOARD_LATE_INIT
 
@@ -111,7 +125,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_NAND_MAX_ECCPOS     256
 #define CONFIG_SYS_NAND_MAX_OOBFREE    2
 
-
 #define CONFIG_SYS_NAND_CSPR_EXT       (0x0)
 #define CONFIG_SYS_NAND_CSPR   (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
                                | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
@@ -256,7 +269,6 @@ unsigned long get_board_sys_clk(void);
 
 /* SPI */
 #ifdef CONFIG_FSL_DSPI
-#define CONFIG_CMD_SF
 #define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_BAR
 #endif
@@ -292,11 +304,9 @@ unsigned long get_board_sys_clk(void);
 /*  MMC  */
 #define CONFIG_MMC
 #ifdef CONFIG_MMC
-#define CONFIG_CMD_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 
@@ -311,9 +321,7 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_USB_XHCI_DWC3
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
-#define CONFIG_CMD_USB
 #define CONFIG_USB_STORAGE
-#define CONFIG_CMD_EXT2
 
 /* Initial environment variables */
 #undef CONFIG_EXTRA_ENV_SETTINGS
@@ -327,13 +335,15 @@ unsigned long get_board_sys_clk(void);
        "initrd_high=0xffffffffffffffff\0"      \
        "kernel_start=0x581100000\0"            \
        "kernel_load=0xa0000000\0"              \
-       "kernel_size=0x2800000\0"
+       "kernel_size=0x2800000\0"               \
+       "mcinitcmd=fsl_mc start mc 0x580300000" \
+       " 0x580800000 \0"
 
 #undef CONFIG_BOOTARGS
 #define CONFIG_BOOTARGS                "console=ttyS1,115200 root=/dev/ram0 " \
-                               "earlycon=uart8250,mmio,0x21c0600" \
+                               "earlycon=uart8250,mmio,0x21c0600 " \
                                "ramdisk_size=0x2000000 default_hugepagesz=2m" \
-                               " hugepagesz=2m hugepages=16"
+                               " hugepagesz=2m hugepages=256"
 
 /* MAC/PHY configuration */
 #ifdef CONFIG_FSL_MC_ENET
@@ -353,6 +363,7 @@ unsigned long get_board_sys_clk(void);
 #define AQ_PHY_ADDR2           0x01
 #define AQ_PHY_ADDR3           0x02
 #define AQ_PHY_ADDR4           0x03
+#define AQR405_IRQ_MASK                0x36
 
 #define CONFIG_MII
 #define CONFIG_ETHPRIME                "DPNI1"
@@ -360,4 +371,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_PHY_AQUANTIA
 #endif
 
+#include <asm/fsl_secure_boot.h>
+
 #endif /* __LS2_RDB_H */