common: Add DISPLAY_BOARDINFO

[people/ms/u-boot.git] / include / configs / ls2080ardb.h

diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 59a3f66310433eed445fc5103a9342fbc1dcd024..ee0f5fc66f2975aa261f0e86fe3444bfde7f05e2 100644 (file)
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -12,7 +12,21 @@
 #undef CONFIG_CONS_INDEX
 #define CONFIG_CONS_INDEX       2
 
-#define CONFIG_DISPLAY_BOARDINFO
+#define I2C_MUX_CH_VOL_MONITOR         0xa
+#define I2C_VOL_MONITOR_ADDR           0x38
+#define CONFIG_VOL_MONITOR_IR36021_READ
+#define CONFIG_VOL_MONITOR_IR36021_SET
+
+#define CONFIG_VID_FLS_ENV             "ls2080ardb_vdd_mv"
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_VID
+#endif
+/* step the IR regulator in 5mV increments */
+#define IR_VDD_STEP_DOWN               5
+#define IR_VDD_STEP_UP                 5
+/* The lowest and highest voltage allowed for LS2080ARDB */
+#define VDD_MV_MIN                     819
+#define VDD_MV_MAX                     1212
 
 #ifndef __ASSEMBLY__
 unsigned long get_board_sys_clk(void);
@@ -46,9 +60,7 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_CMD_SCSI
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
+#define CONFIG_SCSI
 #define CONFIG_DOS_PARTITION
 #define CONFIG_BOARD_LATE_INIT
 
@@ -111,7 +123,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_NAND_MAX_ECCPOS     256
 #define CONFIG_SYS_NAND_MAX_OOBFREE    2
 
-
 #define CONFIG_SYS_NAND_CSPR_EXT       (0x0)
 #define CONFIG_SYS_NAND_CSPR   (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
                                | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
@@ -256,7 +267,6 @@ unsigned long get_board_sys_clk(void);
 
 /* SPI */
 #ifdef CONFIG_FSL_DSPI
-#define CONFIG_CMD_SF
 #define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_BAR
 #endif
@@ -292,11 +302,9 @@ unsigned long get_board_sys_clk(void);
 /*  MMC  */
 #define CONFIG_MMC
 #ifdef CONFIG_MMC
-#define CONFIG_CMD_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 
@@ -306,14 +314,9 @@ unsigned long get_board_sys_clk(void);
  * USB
  */
 #define CONFIG_HAS_FSL_XHCI_USB
-#define CONFIG_USB_XHCI
 #define CONFIG_USB_XHCI_FSL
-#define CONFIG_USB_XHCI_DWC3
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_EXT2
 
 /* Initial environment variables */
 #undef CONFIG_EXTRA_ENV_SETTINGS
@@ -358,9 +361,11 @@ unsigned long get_board_sys_clk(void);
 #define AQR405_IRQ_MASK                0x36
 
 #define CONFIG_MII
-#define CONFIG_ETHPRIME                "DPNI1"
+#define CONFIG_ETHPRIME                "DPMAC1@xgmii"
 #define CONFIG_PHY_GIGE
 #define CONFIG_PHY_AQUANTIA
 #endif
 
+#include <asm/fsl_secure_boot.h>
+
 #endif /* __LS2_RDB_H */