/*
- * DENX MA5D4 configuration
+ * Aries MA5D4 configuration
* Copyright (C) 2015 Marek Vasut <marex@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
#ifndef __MA5D4EVK_CONFIG_H__
#define __MA5D4EVK_CONFIG_H__
-#define CONFIG_SYS_NO_FLASH
-
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
#include "at91-sama5_common.h"
-#undef CONFIG_BOOTARGS
#define CONFIG_SYS_USE_SERIALFLASH 1
+#define CONFIG_BOARD_LATE_INIT
-/*
- * U-Boot Commands
- */
-#define CONFIG_DOS_PARTITION
-#define CONFIG_FAT_WRITE
-/*#define CONFIG_LCD*/
+/* Timer */
+#define CONFIG_SYS_TIMER_COUNTER 0xfc06863c
/*
* Memory configurations
*/
#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
+#define CONFIG_SYS_SDRAM_BASE 0x20000000
#define CONFIG_SYS_SDRAM_SIZE 0x10000000
#ifdef CONFIG_SPL_BUILD
/*
* Environment
*/
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_OFFSET 0x8000
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
#define CONFIG_ENV_SIZE 0x4000
-#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-#define CONFIG_ENV_SECT_SIZE 0x1000
+#define CONFIG_SYS_MMC_ENV_DEV 0 /* eMMC */
+#define CONFIG_ENV_OFFSET 512 /* just after the MBR */
/*
* U-Boot general configurations
*/
-#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
/*
* Serial Driver
*/
#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE ATMEL_BASE_USART0
-#define CONFIG_USART_ID ATMEL_ID_USART0
+#define CONFIG_USART_BASE 0xf802c000
+#define CONFIG_USART_ID 6
/*
* Ethernet
* LCD
*/
#ifdef CONFIG_LCD
-#define CONFIG_CMD_BMP
#define CONFIG_BMP_16BPP
#define CONFIG_BMP_24BPP
#define CONFIG_BMP_32BPP
#define LCD_BPP LCD_COLOR16
#define LCD_OUTPUT_BPP 24
#define CONFIG_ATMEL_HLCD
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#endif
/*
* SD/MMC
*/
#ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#endif
* USB
*/
#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_ATMEL
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
/* USB device */
-#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_RNDIS
-#define CONFIG_USBNET_MANUFACTURER "DENX"
+#define CONFIG_USBNET_MANUFACTURER "AriesEmbedded"
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 * 1024 * 1024)
+#define DFU_DEFAULT_POLL_TIMEOUT 300
#endif
/*
#define CONFIG_INITRD_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_BOOTFILE "fitImage"
-#define CONFIG_BOOTARGS "console=ttyS3,115200"
#define CONFIG_LOADADDR 0x20800000
#define CONFIG_BOOTCOMMAND "run mmc_mmc"
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
"consdev=ttyS3\0" \
"baudrate=115200\0" \
"bootscript=boot.scr\0" \
- "bootdev=/dev/mmcblk1p1\0" \
- "bootpart=1:1\0" \
- "rootdev=/dev/mmcblk1p2\0" \
+ "bootdev=/dev/mmcblk0p1\0" \
+ "bootpart=0:1\0" \
+ "rootdev=/dev/mmcblk0p2\0" \
"netdev=eth0\0" \
+ "dfu_alt_info=mmc raw 0 3867148288\0" \
"kernel_addr_r=0x22000000\0" \
"update_spi_firmware_spl_addr=0x21000000\0" \
"update_spi_firmware_spl_filename=boot.bin\0" \
"nfsargs=" \
"setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
+ "fdtimg=if test ${bootmode} = \"sf\" ; then " \
+ "setenv kernel_fdt 1 ; " \
+ "else ; " \
+ "setenv kernel_fdt 2 ; " \
+ "fi\0" \
"mmc_mmc=" \
- "run mmcload mmcargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
+ "run fdtimg mmcload mmcargs addargs ; " \
+ "bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
"mmc_nfs=" \
- "run mmcload nfsargs addip addargs ; " \
- "bootm ${kernel_addr_r}\0" \
+ "run fdtimg mmcload nfsargs addip addargs ; " \
+ "bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
"net_mmc=" \
- "run netload mmcargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
+ "run fdtimg netload mmcargs addargs ; " \
+ "bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
"net_nfs=" \
- "run netload nfsargs addip addargs ; " \
- "bootm ${kernel_addr_r}\0" \
+ "run fdtimg netload nfsargs addip addargs ; " \
+ "bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
"try_bootscript=" \
"mmc rescan;" \
- "if test -e mmc ${bootpart} ${bootscript} ; then " \
- "if load mmc ${bootpart} ${kernel_addr_r} ${bootscript};"\
+ "if test -e mmc 1:1 ${bootscript} ; then " \
+ "if load mmc 1:1 ${kernel_addr_r} ${bootscript};" \
"then ; " \
"echo Running bootscript... ; " \
"source ${kernel_addr_r} ; " \
#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-
-#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000
+#define CONFIG_SYS_USE_MMC
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+
#endif /* __MA5D4EVK_CONFIG_H__ */
projects / people / ms / u-boot.git / blobdiff