configs: Re-sync with CONFIG_DISTRO_DEFAULTS

[people/ms/u-boot.git] / include / configs / mx6sxsabresd.h

diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index b39ab729d8a439e934ef0d91b7264845fcdcd3e7..1eaaf013f7a53a4b44311029a6dff890511cdf12 100644 (file)
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -43,6 +43,7 @@
 #define UPDATE_M4_ENV ""
 #endif
 
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #define CONFIG_EXTRA_ENV_SETTINGS \
        UPDATE_M4_ENV \
        "script=boot.scr\0" \
@@ -57,9 +58,9 @@
        "videomode=video=ctfb:x:800,y:480,depth:24,pclk:29850,le:89,ri:164,up:23,lo:10,hs:10,vs:10,sync:0,vmode:0\0" \
        "mmcdev=2\0" \
        "mmcpart=1\0" \
-       "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+       "finduuid=part uuid mmc 2:2 uuid\0" \
        "mmcargs=setenv bootargs console=${console},${baudrate} " \
-               "root=${mmcroot}\0" \
+               "root=PARTUUID=${uuid} rootwait rw\0" \
        "loadbootscript=" \
                "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
        "bootscript=echo Running bootscript from mmc ...; " \
@@ -67,6 +68,7 @@
        "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
        "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
        "mmcboot=echo Booting from mmc ...; " \
+               "run finduuid; " \
                "run mmcargs; " \
                "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
                        "if run loadfdt; then " \
@@ -104,10 +106,13 @@
                        "fi; " \
                "else " \
                        "bootz; " \
-               "fi;\0"
+               "fi;\0" \
+       "findfdt="\
+               "if test test $board_rev = REVA ; then " \
+                       "setenv fdt_file imx6sx-sdb-reva.dtb; fi; " \
 
 #define CONFIG_BOOTCOMMAND \
-          "mmc dev ${mmcdev};" \
+          "run findfdt; " \
           "mmc dev ${mmcdev}; if mmc rescan; then " \
                   "if run loadbootscript; then " \
                           "run bootscript; " \
@@ -140,19 +145,12 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC4_BASE_ADDR
 
 /* I2C Configs */
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
 #define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED             100000
 
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PFUZE100
-#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
-
 /* Network */
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
@@ -163,19 +161,15 @@
 #define CONFIG_FEC_XCV_TYPE             RGMII
 #define CONFIG_ETHPRIME                 "FEC"
 
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
 #ifdef CONFIG_CMD_USB
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #endif
 
-#define CONFIG_CMD_PCI
 #ifdef CONFIG_CMD_PCI
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX
@@ -209,9 +203,8 @@
 #endif
 #endif
 
-#define CONFIG_ENV_OFFSET              (8 * SZ_64K)
+#define CONFIG_ENV_OFFSET              (14 * SZ_64K)
 #define CONFIG_ENV_SIZE                        SZ_8K
-#define CONFIG_ENV_IS_IN_MMC
 
 #define CONFIG_SYS_FSL_USDHC_NUM       3
 #if defined(CONFIG_ENV_IS_IN_MMC)