Move setexpr to Kconfig

[people/ms/u-boot.git] / include / configs / omap3_logic.h

diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 0c096f429f1a16d6703386069107900860195018..5a850d85dab7ce90f06dd5c16f8f969377c6b83f 100644 (file)
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -15,17 +15,20 @@
  * High Level Configuration Options
  */
 #define CONFIG_OMAP                    /* in a TI OMAP core */
-#define CONFIG_OMAP34XX                        /* which is a 34XX */
 #define CONFIG_OMAP3_LOGIC             /* working with Logic OMAP boards */
 #define CONFIG_OMAP_GPIO
 #define CONFIG_OMAP_COMMON
+/* Common ARM Erratas */
+#define CONFIG_ARM_ERRATA_454179
+#define CONFIG_ARM_ERRATA_430973
+#define CONFIG_ARM_ERRATA_621766
 
 #define CONFIG_SYS_TEXT_BASE   0x80400000
 
 #define CONFIG_SDRC    /* The chip has SDRC controller */
 
 #include <asm/arch/cpu.h>      /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
 
 /*
  * Display CPU and Board information
@@ -106,7 +109,6 @@
 #define CONFIG_CMD_NET      /* bootp, tftpboot, rarpboot    */
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_SETEXPR     /* Evaluate expressions         */
 
 #undef CONFIG_CMD_FLASH                /* flinfo, erase, protect       */
 #undef CONFIG_CMD_FPGA         /* FPGA configuration Support   */
@@ -118,12 +120,10 @@
 /*
  * I2C
  */
-#define CONFIG_HARD_I2C
-#define CONFIG_DRIVER_OMAP34XX_I2C
-
-#define CONFIG_SYS_I2C_SPEED           100000
-#define CONFIG_SYS_I2C_SLAVE           1
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED    100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE    1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * TWL4030
@@ -143,6 +143,7 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE     1               /* Max number of */
                                                        /* NAND devices */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
 #define CONFIG_JFFS2_DEV               "nand0"
@@ -278,16 +279,12 @@
  */
 
 /* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE               GPMC_SIZE_128M
-
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 2 sectors */
 
 #if defined(CONFIG_CMD_NAND)
-#define CONFIG_SYS_FLASH_BASE          PISMO1_NAND_BASE
+#define CONFIG_SYS_FLASH_BASE          NAND_BASE
 #elif defined(CONFIG_CMD_ONENAND)
-#define CONFIG_SYS_FLASH_BASE          PISMO1_ONEN_BASE
+#define CONFIG_SYS_FLASH_BASE          ONENAND_MAP
 #endif
 
 /* Monitor at start of flash */
@@ -297,7 +294,6 @@
 
 #if defined(CONFIG_CMD_NAND)
 #define CONFIG_NAND_OMAP_GPMC
-#define GPMC_NAND_ECC_LP_x16_LAYOUT    1
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET              SMNAND_ENV_OFFSET
 #endif