powerpc: P1020RDB-PD: Separate from P1_P2_RDB_PC in Kconfig

[people/ms/u-boot.git] / include / configs / p1_p2_rdb_pc.h

diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index edb5395f28caddc5b14cee86ed73dc2c89b2ad77..010a9edb93e7fa0d741cecda00d18e2ce1a4a961 100644 (file)
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -58,7 +58,7 @@
  * 010001 800 800 400 667 NAND Core0 boot; Core1 hold-off
  * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off
  */
-#if defined(CONFIG_P1020RDB_PD)
+#if defined(CONFIG_TARGET_P1020RDB_PD)
 #define CONFIG_BOARDNAME "P1020RDB-PD"
 #define CONFIG_NAND_FSL_ELBC
 #define CONFIG_P1020
@@ -336,7 +336,7 @@
 #define SPD_EEPROM_ADDRESS 0x52
 #undef CONFIG_FSL_DDR_INTERACTIVE
 
-#if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_P1020RDB_PD))
+#if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD))
 #define CONFIG_SYS_SDRAM_SIZE_LAW      LAW_SIZE_2G
 #define CONFIG_CHIP_SELECTS_PER_CTRL   2
 #else
@@ -406,7 +406,7 @@
 /*
  * Local Bus Definitions
  */
-#if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_P1020RDB_PD))
+#if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD))
 #define CONFIG_SYS_MAX_FLASH_SECT      512     /* 64M */
 #define CONFIG_SYS_FLASH_BASE          0xec000000
 #elif defined(CONFIG_P1020UTM)
@@ -455,7 +455,7 @@
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_CMD_NAND
-#if defined(CONFIG_P1020RDB_PD)
+#if defined(CONFIG_TARGET_P1020RDB_PD)
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
 #else
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (16 * 1024)
@@ -466,7 +466,7 @@
        | BR_PS_8       /* Port Size = 8 bit */ \
        | BR_MS_FCM     /* MSEL = FCM */ \
        | BR_V) /* valid */
-#if defined(CONFIG_P1020RDB_PD)
+#if defined(CONFIG_TARGET_P1020RDB_PD)
 #define CONFIG_SYS_NAND_OR_PRELIM      (OR_AM_32KB \
        | OR_FCM_PGS    /* Large Page*/ \
        | OR_FCM_CSCT \
@@ -853,7 +853,7 @@
 #endif
 #endif
 
-#if defined(CONFIG_P1020RDB_PD)
+#if defined(CONFIG_TARGET_P1020RDB_PD)
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1
 #endif