common: Add DISPLAY_BOARDINFO

[people/ms/u-boot.git] / include / configs / p1_p2_rdb_pc.h

diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 596193d5c4cf41bcc803f4e1c7a02bbd315075b5..276a693823f2c01974c52194631673eecf481ba4 100644 (file)
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -10,12 +10,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_DISPLAY_BOARDINFO
-
-#ifdef CONFIG_36BIT
-#define CONFIG_PHYS_64BIT
-#endif
-
 #if defined(CONFIG_P1020MBG)
 #define CONFIG_BOARDNAME "P1020MBG-PC"
 #define CONFIG_P1020
@@ -185,16 +179,9 @@
 #endif
 
 #ifdef CONFIG_SDCARD
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SPL_MMC_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE           0x11001000
 #define CONFIG_SPL_TEXT_BASE           0xf8f81000
@@ -213,17 +200,9 @@
 #endif
 
 #ifdef CONFIG_SPIFLASH
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
 #define CONFIG_FSL_LAW         /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE           0x11001000
 #define CONFIG_SPL_TEXT_BASE           0xf8f81000
@@ -245,14 +224,7 @@
 #ifdef CONFIG_TPL_BUILD
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_NAND_INIT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_COMMON_INIT_DDR
 #define CONFIG_SPL_MAX_SIZE            (128 << 10)
 #define CONFIG_SPL_TEXT_BASE           0xf8f81000
@@ -263,8 +235,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    ((128 + 128) << 10)
 #elif defined(CONFIG_SPL_BUILD)
 #define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
 #define CONFIG_SPL_TEXT_BASE           0xff800000
@@ -306,8 +276,8 @@
 
 #define CONFIG_FSL_ELBC
 #define CONFIG_PCI
-#define CONFIG_PCIE1   /* PCIE controler 1 (slot 1) */
-#define CONFIG_PCIE2   /* PCIE controler 2 (slot 2) */
+#define CONFIG_PCIE1   /* PCIE controller 1 (slot 1) */
+#define CONFIG_PCIE2   /* PCIE controller 2 (slot 2) */
 #define CONFIG_FSL_PCI_INIT    /* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_FSL_PCIE_RESET  /* need PCIe reset errata */
@@ -882,7 +852,6 @@
 #ifdef CONFIG_USB_EHCI
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_EHCI_FSL
-#define CONFIG_USB_STORAGE
 #endif
 #endif
 
@@ -944,7 +913,6 @@
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR        1000000
 
-#define CONFIG_BOOTDELAY 10    /* -1 disables auto-boot */
 #define CONFIG_BOOTARGS        /* the boot command will set bootargs */
 
 #define CONFIG_BAUDRATE        115200
@@ -990,7 +958,7 @@ i2c mw 18 3 __SW_BOOT_MASK 1; reset
 "consoledev=ttyS0\0"   \
 "ramdiskaddr=2000000\0"        \
 "ramdiskfile=rootfs.ext2.gz.uboot\0"   \
-"fdtaddr=c00000\0"     \
+"fdtaddr=1e00000\0"    \
 "bdev=sda1\0" \
 "jffs2nor=mtdblock3\0" \
 "norbootaddr=ef080000\0"       \