MIPS: add BMIPS Netgear CG3100D board

[people/ms/u-boot.git] / include / configs / pm9263.h

diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 92d080e36abd4f62d703f48c3a36caf7fd8ae56b..41d5722490f4742a60ef05a1ef1795627557be68 100644 (file)
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -19,8 +19,6 @@
 #include <asm/hardware.h>
 
 /* ARM asynchronous clock */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
 
 #define MASTER_PLL_DIV         6
 #define MASTER_PLL_MUL         65
@@ -33,7 +31,6 @@
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_SYS_TEXT_BASE   0
 
-#define MACH_TYPE_PM9263       1475
 #define CONFIG_MACH_TYPE       MACH_TYPE_PM9263
 
 /* clocks */
@@ -153,7 +150,6 @@
 
 #undef CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_USER_LOWLEVEL_INIT      1
-#define CONFIG_BOARD_EARLY_INIT_F
 
 /*
  * Hardware drivers
@@ -164,16 +160,13 @@
 #define        CONFIG_USART_ID                 ATMEL_ID_SYS
 
 /* LCD */
-#define CONFIG_LCD                     1
 #define LCD_BPP                                LCD_COLOR8
 #define CONFIG_LCD_LOGO                        1
 #undef LCD_TEST_PATTERN
 #define CONFIG_LCD_INFO                        1
 #define CONFIG_LCD_INFO_BELOW_LOGO     1
-#define CONFIG_SYS_WHITE_ON_BLACK      1
 #define CONFIG_ATMEL_LCD               1
 #define CONFIG_ATMEL_LCD_BGR555                1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV   1
 
 #define CONFIG_LCD_IN_PSRAM            1
 
@@ -182,7 +175,6 @@
 #define CONFIG_RED_LED         GPIO_PIN_PB(7) /* this is the power led */
 #define CONFIG_GREEN_LED       GPIO_PIN_PB(8) /* this is the user1 led */
 
-#define CONFIG_BOOTDELAY       3
 
 /*
  * BOOTP options
@@ -195,7 +187,6 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_NAND                1
 
 /* SDRAM */
@@ -235,7 +226,6 @@
 
 #endif
 
-#define CONFIG_CMD_JFFS2               1
 #define CONFIG_JFFS2_CMDLINE           1
 #define CONFIG_JFFS2_NAND              1
 #define CONFIG_JFFS2_DEV               "nand0" /* NAND device jffs2 lives on */
@@ -261,12 +251,10 @@
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW                    1
-#define CONFIG_DOS_PARTITION                   1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT           1
 #define CONFIG_SYS_USB_OHCI_REGS_BASE          0x00a00000      /* AT91SAM9263_UHP_BASE */
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME          "at91sam9263"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
-#define CONFIG_USB_STORAGE                     1
 
 #define CONFIG_SYS_LOAD_ADDR                   0x22000000      /* load address */
 
@@ -363,8 +351,6 @@
 #error "Undefined memory device"
 #endif
 
-#define CONFIG_BAUDRATE                        115200
-
 #define CONFIG_SYS_CBSIZE              256
 #define CONFIG_SYS_MAXARGS             16
 #define CONFIG_SYS_PBSIZE              \