powerpc: Cleanup BOOTFLAG_* references

[people/ms/u-boot.git] / include / configs / sbc8349.h

diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index 94588e260302740f8953ab471621e4aea7a5edfc..ee2292ce8648088f23db86f90624029d66614a35 100644 (file)
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -31,17 +31,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/*
- * Top level Makefile configuration choices
- */
-#ifdef CONFIG_66
-#define PCI_66M
-#endif
-
-#ifdef CONFIG_33
-#define PCI_33M
-#endif
-
 /*
  * High Level Configuration Options
  */
@@ -51,6 +40,8 @@
 #define CONFIG_MPC8349         1       /* MPC8349 specific */
 #define CONFIG_SBC8349         1       /* WRS SBC8349 board specific */
 
+#define        CONFIG_SYS_TEXT_BASE    0xFF800000
+
 /* Don't enable PCI2 on sbc834x - it doesn't exist physically. */
 #undef CONFIG_MPC83XX_PCI2             /* support for 2nd PCI controller */
 
@@ -60,14 +51,14 @@
  * physically empty.  The board will automatically (i.e w/o jumpers)
  * clock down to 33MHz if you insert a 33MHz PCI card.
  */
-#ifdef PCI_33M
+#ifdef CONFIG_PCI_33M
 #define CONFIG_83XX_CLKIN      33000000        /* in Hz */
 #else  /* 66M */
 #define CONFIG_83XX_CLKIN      66000000        /* in Hz */
 #endif
 
 #ifndef CONFIG_SYS_CLK_FREQ
-#ifdef PCI_33M
+#ifdef CONFIG_PCI_33M
 #define CONFIG_SYS_CLK_FREQ    33000000
 #define HRCWL_CSB_TO_CLKIN     HRCWL_CSB_TO_CLKIN_8X1
 #else  /* 66M */
@@ -168,7 +159,7 @@
 #define CONFIG_SYS_FLASH_ERASE_TOUT    60000   /* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (ms) */
 
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE       /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* start of monitor */
 
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #define CONFIG_SYS_RAMBOOT
@@ -608,14 +599,6 @@
 #define CONFIG_SYS_DBAT7L      CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02    /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */