#ifndef __CONFIG_TI816X_EVM_H
#define __CONFIG_TI816X_EVM_H
-#define CONFIG_SYS_CACHELINE_SIZE 64
-
-#define CONFIG_TI81XX
-#define CONFIG_TI816X
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_OMAP
-#define CONFIG_OMAP_COMMON
-
-#define CONFIG_ARCH_CPU_INIT
-
+#include <configs/ti_armv7_omap.h>
#include <asm/arch/omap.h>
#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (32 * 1024))
-#define CONFIG_SYS_LONGHELP /* undef save memory */
#define CONFIG_MACH_TYPE MACH_TYPE_TI8168EVM
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG /* required for ramdisk support */
-
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_DISPLAY_CPUINFO
-
#define CONFIG_EXTRA_ENV_SETTINGS \
- "loadaddr=0x81000000\0" \
+ DEFAULT_LINUX_BOOT_ENV \
+ "mtdids=" MTDIDS_DEFAULT "\0" \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
#define CONFIG_BOOTCOMMAND \
"mmc rescan;" \
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK >> 1)
-#define CONFIG_SYS_MAXARGS 32
-#define CONFIG_SYS_CBSIZE 512 /* console I/O buffer size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
- + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot arg buffer size */
-
-#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */
-
-#define CONFIG_CMD_ASKEN
-#define CONFIG_OMAP_GPIO
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_OMAP_HSMMC
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_FS_FAT
-
-/*
- * Only one of the following two options (DDR3/DDR2) should be enabled
- * CONFIG_TI816X_EVM_DDR2
- * CONFIG_TI816X_EVM_DDR3
- */
-#define CONFIG_TI816X_EVM_DDR3
-
-/*
- * Supported values: 400, 531, 675 or 796 MHz
- */
-#define CONFIG_TI816X_DDR_PLL_796
-
-#define CONFIG_TI816X_USE_EMIF0 1
-#define CONFIG_TI816X_USE_EMIF1 1
-
-#define CONFIG_NR_DRAM_BANKS 2 /* we have 2 banks of DRAM */
-#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */
-#define PHYS_DRAM_1_SIZE 0x40000000 /* 1 GB */
-#define PHYS_DRAM_2 0xC0000000 /* DRAM Bank #2 */
-#define PHYS_DRAM_2_SIZE 0x40000000 /* 1 GB */
+#define CONFIG_CMD_ASKENV
#define CONFIG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2048MB */
-#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
- GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
/**
* Platform/Board specific defs
#define CONFIG_SYS_TIMERBASE 0x4802E000
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#undef CONFIG_NAND_OMAP_GPMC
-
/*
* NS16550 Configuration
*/
#define CONFIG_SYS_NS16550_CLK (48000000)
#define CONFIG_SYS_NS16550_COM1 0x48024000 /* Base EVM has UART2 */
-#define CONFIG_BAUDRATE 115200
-
/* allow overwriting serial config and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SERIAL2
#define CONFIG_SERIAL3
#define CONFIG_CONS_INDEX 1
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-#define CONFIG_ENV_IS_NOWHERE
+/*
+ * GPMC NAND block. We support 1 device and the physical address to
+ * access CS0 at is 0x8000000.
+ */
+#define CONFIG_SYS_NAND_BASE 0x8000000
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+
+/* NAND: SPL related configs */
+#define CONFIG_SPL_NAND_AM33XX_BCH
+
+/* NAND: device related configs */
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
+#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
+ CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
+#define CONFIG_SYS_NAND_OOBSIZE 64
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
+/* NAND: driver related configs */
+#define CONFIG_NAND_OMAP_GPMC_PREFETCH
+#define CONFIG_NAND_OMAP_ELM
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
+ 10, 11, 12, 13, 14, 15, 16, 17, \
+ 18, 19, 20, 21, 22, 23, 24, 25, \
+ 26, 27, 28, 29, 30, 31, 32, 33, \
+ 34, 35, 36, 37, 38, 39, 40, 41, \
+ 42, 43, 44, 45, 46, 47, 48, 49, \
+ 50, 51, 52, 53, 54, 55, 56, 57, }
+
+#define CONFIG_SYS_NAND_ECCSIZE 512
+#define CONFIG_SYS_NAND_ECCBYTES 14
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
+#define MTDIDS_DEFAULT "nand0=nand.0"
+#define MTDPARTS_DEFAULT "mtdparts=nand.0:" \
+ "128k(NAND.SPL)," \
+ "128k(NAND.SPL.backup1)," \
+ "128k(NAND.SPL.backup2)," \
+ "128k(NAND.SPL.backup3)," \
+ "256k(NAND.u-boot-spl-os)," \
+ "1m(NAND.u-boot)," \
+ "128k(NAND.u-boot-env)," \
+ "128k(NAND.u-boot-env.backup1)," \
+ "8m(NAND.kernel)," \
+ "-(NAND.file-system)"
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET 0x001c0000
+#define CONFIG_ENV_OFFSET_REDUND 0x001e0000
+#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
/* SPL */
/* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */
#define CONFIG_SPL_TEXT_BASE 0x40400000
-#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024)
-
-#define CONFIG_SPL_BSS_START_ADDR 0x80000000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
-
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
-
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_YMODEM_SUPPORT
-#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
-#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
-
-#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
+ CONFIG_SPL_TEXT_BASE)
+
+#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
#define CONFIG_SYS_TEXT_BASE 0x80800000
-#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
/* Since SPL did pll and ddr initialization for us,
* we don't need to do it twice.
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif
-/* Unsupported features */
-#undef CONFIG_USE_IRQ
-
+/*
+ * Disable MMC DM for SPL build and can be re-enabled after adding
+ * DM support in SPL
+ */
+#ifdef CONFIG_SPL_BUILD
+#undef CONFIG_DM_MMC
+#undef CONFIG_TIMER
+#undef CONFIG_DM_USB
+#endif
#endif
projects / people / ms / u-boot.git / blobdiff