Convert CONFIG_SPL_FAT_SUPPORT to Kconfig

[people/ms/u-boot.git] / include / configs / tqma6.h

diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index 52d5ae606fb459eb8155160f92675965e370b8dd..be8920e80de440c53866fb0f84f57e303bc9afb7 100644 (file)
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -9,13 +9,12 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/kconfig.h>
 /* SPL */
 /* #if defined(CONFIG_SPL_BUILD) */
 
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_EXT_SUPPORT
 
 /* common IMX6 SPL configuration */
 #include "imx6_spl.h"
@@ -43,24 +42,22 @@
 #define CONFIG_MXC_UART
 
 /* SPI */
-#define CONFIG_CMD_SPI
 #define CONFIG_MXC_SPI
 
 /* SPI Flash */
-#define CONFIG_SPI_FLASH_STMICRO
 
 #define TQMA6_SPI_FLASH_SECTOR_SIZE    SZ_64K
 
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_BUS  0
 #define CONFIG_SF_DEFAULT_CS   0
 #define CONFIG_SF_DEFAULT_SPEED        50000000
 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
 
 /* I2C Configs */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_I2C_SPEED           100000
@@ -89,24 +86,14 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
 /* USB Configs */
-#define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_SMSC95XX
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
 
-/* Fuses */
-#define CONFIG_MXC_OCOTP
-#define CONFIG_CMD_FUSE
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-
 #define CONFIG_FEC_MXC
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
 #define CONFIG_PHYLIB
@@ -120,7 +107,6 @@
 
 /* Command definition */
 #define CONFIG_CMD_BMODE
-#define CONFIG_CMD_ITEST
 
 #define CONFIG_ENV_SIZE                        (SZ_8K)
 /* Size of malloc() pool */
@@ -290,7 +276,6 @@
                "sf read ${${fdt_addr}} ${offset} ${size}; "                   \
                "setenv size ; setenv offset\0"                                \
 
-
 #define CONFIG_BOOTCOMMAND                                                     \
        "sf probe; run mmcboot; run netboot; run panicboot"                    \
 
@@ -381,11 +366,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE
-
 /*
  * All the defines above are for the TQMa6 SoM
  *
@@ -393,6 +373,8 @@
  */
 #ifdef CONFIG_MBA6
 #include "tqma6_mba6.h"
+#elif CONFIG_WRU4
+#include "tqma6_wru4.h"
 #else
 #error "No baseboard for the TQMa6 defined!"
 #endif