Merge git://www.denx.de/git/u-boot-marvell

[people/ms/u-boot.git] / include / configs / warp7.h

diff --git a/include/configs/warp7.h b/include/configs/warp7.h
index fc0e51a9ae8614b98fa9d2bc69f1a26aa301504c..4528f094ce3447c80619c9971785ead91926f7dd 100644 (file)
--- a/include/configs/warp7.h
+++ b/include/configs/warp7.h
@@ -18,15 +18,15 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (35 * SZ_1M)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
 /* MMC Config*/
 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC3_BASE_ADDR
 #define CONFIG_SUPPORT_EMMC_BOOT
 #define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
 #define CONFIG_SYS_MMC_IMG_LOAD_PART   1
 
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_CMD_PART
+
 #define CONFIG_DFU_ENV_SETTINGS \
        "dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
 
@@ -35,17 +35,18 @@
        "script=boot.scr\0" \
        "image=zImage\0" \
        "console=ttymxc0\0" \
+       "ethact=usb_ether\0" \
        "fdt_high=0xffffffff\0" \
        "initrd_high=0xffffffff\0" \
-       "fdt_file=imx7d-warp.dtb\0" \
+       "fdt_file=imx7s-warp.dtb\0" \
        "fdt_addr=0x83000000\0" \
        "boot_fdt=try\0" \
        "ip_dyn=yes\0" \
        "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
        "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
-       "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+       "finduuid=part uuid mmc 0:2 uuid\0" \
        "mmcargs=setenv bootargs console=${console},${baudrate} " \
-               "root=${mmcroot}\0" \
+               "root=PARTUUID=${uuid} rootwait rw\0" \
        "loadbootscript=" \
                "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
        "bootscript=echo Running bootscript from mmc ...; " \
@@ -53,6 +54,7 @@
        "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
        "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
        "mmcboot=echo Booting from mmc ...; " \
+               "run finduuid; " \
                "run mmcargs; " \
                "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
                        "if run loadfdt; then " \
@@ -101,6 +103,18 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
+/* I2C configs */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1
+#define CONFIG_SYS_I2C_SPEED           100000
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE3000
+#define CONFIG_POWER_PFUZE3000_I2C_ADDR        0x08
+
 /* FLASH and environment organization */
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENV_SIZE                        SZ_8K
@@ -111,12 +125,8 @@
 
 #define CONFIG_SYS_MMC_ENV_DEV         0
 #define CONFIG_SYS_MMC_ENV_PART                0
-#define CONFIG_MMCROOT                 "/dev/mmcblk2p2"
 
 /* USB Configs */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX7
-#define CONFIG_USB_STORAGE
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
@@ -125,23 +135,18 @@
 
 #define CONFIG_IMX_THERMAL
 
-#define CONFIG_CI_UDC
 #define CONFIG_USBD_HS
-#define CONFIG_USB_GADGET_DUALSPEED
 
-#define CONFIG_USB_GADGET
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
-#define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW    2
-
-#define CONFIG_G_DNL_VENDOR_NUM                0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM       0xa4a5
-#define CONFIG_G_DNL_MANUFACTURER      "FSL"
 
 /* USB Device Firmware Update support */
-#define CONFIG_USB_FUNCTION_DFU
-#define CONFIG_DFU_MMC
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE   SZ_16M
 #define DFU_DEFAULT_POLL_TIMEOUT       300
 
+#define CONFIG_USB_ETHER
+#define CONFIG_USB_ETH_CDC
+#define CONFIG_USB_ETH_RNDIS
+#define CONFIG_USBNET_HOST_ADDR                "de:ad:be:af:00:00"
+#define CONFIG_USBNET_DEV_ADDR         "de:ad:be:af:00:01"
+
 #endif