Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig

[people/ms/u-boot.git] / include / configs / xilinx_zynqmp.h

diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index b73502b3465e14bfb39f4c556d0bd06a75c73b9f..9997fd095982fed4a58d7b25870e5b8c081c20ab 100644 (file)
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -42,7 +42,6 @@
 /* Serial setup */
 #define CONFIG_ARM_DCC
 #define CONFIG_CPU_ARMV8
-#define CONFIG_ZYNQ_SERIAL
 
 #define CONFIG_CONS_INDEX              0
 #define CONFIG_SYS_BAUDRATE_TABLE \
@@ -76,7 +75,6 @@
 #endif
 
 #ifdef CONFIG_NAND_ARASAN
-# define CONFIG_CMD_NAND_LOCK_UNLOCK
 # define CONFIG_SYS_MAX_NAND_DEVICE    1
 # define CONFIG_SYS_NAND_SELF_INIT
 # define CONFIG_SYS_NAND_ONFI_DETECTION
@@ -90,7 +88,6 @@
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE   0x1800000
 #define DFU_DEFAULT_POLL_TIMEOUT       300
 #define CONFIG_USB_CABLE_CHECK
-#define CONFIG_CMD_THOR_DOWNLOAD
 #define CONFIG_USB_FUNCTION_THOR
 #define CONFIG_THOR_RESET_OFF
 #define DFU_ALT_INFO_RAM \
@@ -105,17 +102,6 @@
                DFU_ALT_INFO_RAM
 
 #ifndef CONFIG_SPL_BUILD
-# define CONFIG_USB_FUNCTION_FASTBOOT
-# define CONFIG_CMD_FASTBOOT
-# define CONFIG_ANDROID_BOOT_IMAGE
-# define CONFIG_FASTBOOT_BUF_ADDR 0x100000
-# define CONFIG_FASTBOOT_BUF_SIZE 0x6000000
-# define CONFIG_FASTBOOT_FLASH
-# ifdef CONFIG_MMC_SDHCI_ZYNQ
-#  define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
-# endif
-
-# define CONFIG_RANDOM_UUID
 # define PARTS_DEFAULT \
        "partitions=uuid_disk=${uuid_gpt_disk};" \
        "name=""boot"",size=16M,uuid=${uuid_gpt_boot};" \
@@ -137,22 +123,19 @@
 /* Monitor Command Prompt */
 /* Console I/O Buffer Size */
 #define CONFIG_SYS_CBSIZE              2048
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
+#define CONFIG_PANIC_HANG
 #define CONFIG_SYS_MAXARGS             64
 
 /* Ethernet driver */
 #if defined(CONFIG_ZYNQ_GEM)
-# define CONFIG_NET_MULTI
 # define CONFIG_MII
 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 # define CONFIG_PHY_MARVELL
 # define CONFIG_PHY_NATSEMI
 # define CONFIG_PHY_TI
-# define CONFIG_PHY_GIGE
 # define CONFIG_PHY_VITESSE
 # define CONFIG_PHY_REALTEK
 # define PHY_ANEG_TIMEOUT       20000
@@ -175,8 +158,6 @@
 #endif
 
 #ifdef CONFIG_SATA_CEVA
-#define CONFIG_LIBATA
-#define CONFIG_SCSI_AHCI
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID    2
 #define CONFIG_SYS_SCSI_MAX_LUN                1
 #define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
@@ -253,6 +234,15 @@
 
 #define CONFIG_SPL_FRAMEWORK
 
+#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT)
+# define CONFIG_SPL_SPI_LOAD
+# define CONFIG_SYS_SPI_KERNEL_OFFS    0x80000
+# define CONFIG_SYS_SPI_ARGS_OFFS      0xa0000
+# define CONFIG_SYS_SPI_ARGS_SIZE      0xa0000
+
+# define CONFIG_SYS_SPI_U_BOOT_OFFS    0x170000
+#endif
+
 /* u-boot is like dtb */
 #define CONFIG_SPL_FS_LOAD_ARGS_NAME   "u-boot.bin"
 #define CONFIG_SYS_SPL_ARGS_ADDR       0x8000000
@@ -277,14 +267,14 @@
 # define CONFIG_SPL_ENV_SUPPORT
 # define CONFIG_SPL_HASH_SUPPORT
 # define CONFIG_ENV_MAX_ENTRIES        10
+#endif
 
-# define CONFIG_SYS_SPL_MALLOC_START   0x20000000
-# define CONFIG_SYS_SPL_MALLOC_SIZE    0x100000
+#define CONFIG_SYS_SPL_MALLOC_START    0x20000000
+#define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000
 
 #ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
 # error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used"
 #endif
-#endif
 
 #define CONFIG_BOARD_EARLY_INIT_F