Merge tag 'xilinx-for-v2017.07' of git://www.denx.de/git/u-boot-microblaze

[people/ms/u-boot.git] / include / configs / zynq-common.h

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 36dc140e002c7f4ba6a9d1fbb1713bfb923c0c0d..4b6b08885134125187fb38a82a4e4a983c6483e5 100644 (file)
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -28,7 +28,6 @@
 #define CONFIG_SYS_TIMER_COUNTER       (CONFIG_SYS_TIMERBASE + 0x4)
 
 /* Serial drivers */
-#define CONFIG_BAUDRATE                115200
 /* The following table includes the supported baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE  \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
@@ -60,7 +59,7 @@
 #endif
 
 /* NOR */
-#ifndef CONFIG_SYS_NO_FLASH
+#ifdef CONFIG_MTD_NOR_FLASH
 # define CONFIG_SYS_FLASH_BASE         0xE2000000
 # define CONFIG_SYS_FLASH_SIZE         (16 * 1024 * 1024)
 # define CONFIG_SYS_MAX_FLASH_BANKS    1
@@ -83,8 +82,7 @@
 #endif
 
 /* MMC */
-#if defined(CONFIG_ZYNQ_SDHCI)
-# define CONFIG_GENERIC_MMC
+#if defined(CONFIG_MMC_SDHCI_ZYNQ)
 # define CONFIG_ZYNQ_SDHCI_MAX_FREQ    52000000
 #endif
 
@@ -106,7 +104,7 @@
        "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
        "thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
 
-# if defined(CONFIG_ZYNQ_SDHCI)
+# if defined(CONFIG_MMC_SDHCI_ZYNQ)
 #  define DFU_ALT_INFO_MMC \
        "dfu_mmc_info=" \
        "set dfu_alt_info " \
@@ -129,10 +127,8 @@
 # define DFU_ALT_INFO
 #endif
 
-#if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQ_USB)
+#if defined(CONFIG_MMC_SDHCI_ZYNQ) || defined(CONFIG_ZYNQ_USB)
 # define CONFIG_SUPPORT_VFAT
-# define CONFIG_FAT_WRITE
-# define CONFIG_DOS_PARTITION
 #endif
 
 #if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
@@ -148,7 +144,6 @@
 
 /* EEPROM */
 #ifdef CONFIG_ZYNQ_EEPROM
-# define CONFIG_CMD_EEPROM
 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN                1
 # define CONFIG_SYS_I2C_EEPROM_ADDR            0x54
 # define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS     4
@@ -164,13 +159,13 @@
 
 /* Environment */
 #ifndef CONFIG_ENV_IS_NOWHERE
-# ifndef CONFIG_SYS_NO_FLASH
+# ifdef CONFIG_MTD_NOR_FLASH
 /* Environment in NOR flash */
 #  define CONFIG_ENV_IS_IN_FLASH
 # elif defined(CONFIG_ZYNQ_QSPI)
 /* Environment in Serial Flash */
 #  define CONFIG_ENV_IS_IN_SPI_FLASH
-# elif defined(CONFIG_SYS_NO_FLASH)
+# elif !defined(CONFIG_MTD_NOR_FLASH)
 #  define CONFIG_ENV_IS_NOWHERE
 # endif
 
@@ -237,10 +232,8 @@
 
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CLOCKS
-#define CONFIG_CMD_CLK
 #define CONFIG_SYS_MAXARGS             32 /* max number of command args */
 #define CONFIG_SYS_CBSIZE              256 /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
@@ -265,10 +258,6 @@
 #define CONFIG_FPGA
 #define CONFIG_FPGA_XILINX
 #define CONFIG_FPGA_ZYNQPL
-#define CONFIG_CMD_FPGA_LOADMK
-#define CONFIG_CMD_FPGA_LOADP
-#define CONFIG_CMD_FPGA_LOADBP
-#define CONFIG_CMD_FPGA_LOADFS
 
 /* FIT support */
 #define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */
@@ -289,12 +278,11 @@
 /* SPL part */
 #define CONFIG_CMD_SPL
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_BOARD_INIT
 
 #define CONFIG_SPL_LDSCRIPT    "arch/arm/mach-zynq/u-boot-spl.lds"
 
 /* MMC support */
-#ifdef CONFIG_ZYNQ_SDHCI
+#ifdef CONFIG_MMC_SDHCI_ZYNQ
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot.img"
 #endif