#define _SCSI_H
#include <asm/cache.h>
+#include <bouncebuf.h>
#include <linux/dma-direction.h>
-/* Fix this to the maximum */
-#define SCSI_MAX_DEVICE \
- (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN)
-
struct udevice;
+/**
+ * struct scsi_cmd - information about a SCSI command to be processed
+ *
+ * @cmd: command
+ * @sense_buf: for request sense
+ * @status: SCSI Status
+ * @target: Target ID
+ * @lun: Target LUN
+ * @cmdlen: command len
+ * @datalen: Total data length
+ * @pdata: pointer to data
+ * @msgout: Messge out buffer (NOT USED)
+ * @msgin: Message in buffer
+ * @sensecmdlen: Sense command len
+ * @sensedatalen: Sense data len
+ * @sensecmd: Sense command
+ * @contr_stat: Controller Status
+ * @trans_bytes: tranfered bytes
+ * @priv: Private value
+ * @dma_dir: Direction of data structure
+ */
struct scsi_cmd {
- unsigned char cmd[16]; /* command */
- /* for request sense */
- unsigned char sense_buf[64]
+ unsigned char cmd[16];
+ unsigned char sense_buf[64]
__attribute__((aligned(ARCH_DMA_MINALIGN)));
- unsigned char status; /* SCSI Status */
- unsigned char target; /* Target ID */
- unsigned char lun; /* Target LUN */
- unsigned char cmdlen; /* command len */
- unsigned long datalen; /* Total data length */
- unsigned char * pdata; /* pointer to data */
- unsigned char msgout[12]; /* Messge out buffer (NOT USED) */
- unsigned char msgin[12]; /* Message in buffer */
- unsigned char sensecmdlen; /* Sense command len */
- unsigned long sensedatalen; /* Sense data len */
- unsigned char sensecmd[6]; /* Sense command */
- unsigned long contr_stat; /* Controller Status */
- unsigned long trans_bytes; /* tranfered bytes */
-
- unsigned int priv;
- enum dma_data_direction dma_dir;
+ unsigned char status;
+ unsigned char target;
+ unsigned char lun;
+ unsigned char cmdlen;
+ unsigned long datalen;
+ unsigned char *pdata;
+ unsigned char msgout[12];
+ unsigned char msgin[12];
+ unsigned char sensecmdlen;
+ unsigned long sensedatalen;
+ unsigned char sensecmd[6];
+ unsigned long contr_stat;
+ unsigned long trans_bytes;
+
+ unsigned int priv;
+ enum dma_data_direction dma_dir;
};
/*-----------------------------------------------------------
#define SCSI_WRITE_LONG 0x3F /* Write Long (O) */
#define SCSI_WRITE_SAME 0x41 /* Write Same (O) */
+/**
+ * enum scsi_cmd_phase - current phase of the SCSI protocol
+ *
+ * @SCSIPH_START: Start phase
+ * @SCSIPH_DATA: Data phase
+ * @SCSIPH_STATUS: Status phase
+ */
+enum scsi_cmd_phase {
+ SCSIPH_START,
+ SCSIPH_DATA,
+ SCSIPH_STATUS,
+};
+
+/**
+ * struct scsi_inquiry_resp - holds a SCSI inquiry command
+ *
+ * @type; command type
+ * @flags; command flags
+ * @version; command version
+ * @data_format; data format
+ * @additional_len; additional data length
+ * @spare[3]; spare bytes
+ * @vendor[8]; vendor information
+ * @product[16]; production information
+ * @revision[4]; revision information
+ */
+struct scsi_inquiry_resp {
+ u8 type;
+ u8 flags;
+ u8 version;
+ u8 data_format;
+ u8 additional_len;
+ u8 spare[3];
+ char vendor[8];
+ char product[16];
+ char revision[4];
+};
+
+/**
+ * struct scsi_read_capacity_resp - holds the response to a read-capacity cmd
+ *
+ * @last_block_addr: Logical block address of last block
+ * @block_len: Length of each block in bytes
+ */
+struct scsi_read_capacity_resp {
+ u32 last_block_addr;
+ u32 block_len;
+};
+
+/**
+ * struct scsi_read10_req - holds a SCSI READ10 request
+ *
+ * @cmd; command type
+ * @lun_flags; LUN flags
+ * @lba; Logical block address to start reading from
+ * @spare; spare bytes
+ * @xfer_len: number of blocks to read
+ * @spare2: more spare bytes
+ */
+struct __packed scsi_read10_req {
+ u8 cmd;
+ u8 lun_flags;
+ u32 lba;
+ u8 spare;
+ u16 xfer_len;
+ u8 spare2[3];
+};
+
+/** struct scsi_write10_req - data for the write10 command */
+struct __packed scsi_write10_req {
+ u8 cmd;
+ u8 lun_flags;
+ u32 lba;
+ u8 spare;
+ u16 xfer_len;
+ u8 spare2[3];
+};
+
/**
* struct scsi_plat - stores information about SCSI controller
*
* @return 0 if OK, -ve on error
*/
int (*bus_reset)(struct udevice *dev);
+
+#if IS_ENABLED(CONFIG_BOUNCE_BUFFER)
+ /**
+ * buffer_aligned() - test memory alignment of block operation buffer
+ *
+ * Some devices have limited DMA capabilities and require that the
+ * buffers passed to them fit specific properties. This optional
+ * callback can be used to indicate whether a buffer alignment is
+ * suitable for the device DMA or not, and trigger use of generic
+ * bounce buffer implementation to help use of unsuitable buffers
+ * at the expense of performance degradation.
+ *
+ * @dev: Block device associated with the request
+ * @state: Bounce buffer state
+ * @return 1 if OK, 0 if unaligned
+ */
+ int (*buffer_aligned)(struct udevice *dev, struct bounce_buffer *state);
+#endif /* CONFIG_BOUNCE_BUFFER */
};
#define scsi_get_ops(dev) ((struct scsi_ops *)(dev)->driver->ops)
*/
int scsi_scan_dev(struct udevice *dev, bool verbose);
-#ifndef CONFIG_DM_SCSI
-void scsi_low_level_init(int busdevfunc);
-void scsi_init(void);
-#endif
-
#define SCSI_IDENTIFY 0xC0 /* not used */
/* Hardware errors */
projects / thirdparty / u-boot.git / blobdiff