#include <post.h>
-#if CONFIG_POST & CFG_POST_UART
+#if CONFIG_POST & CONFIG_SYS_POST_UART
/*
* This table defines the UART's that should be tested and can
* be overridden in the board config file
*/
-#ifndef CFG_POST_UART_TABLE
-#define CFG_POST_UART_TABLE {UART0_BASE, UART1_BASE, UART2_BASE, UART3_BASE}
+#ifndef CONFIG_SYS_POST_UART_TABLE
+#define CONFIG_SYS_POST_UART_TABLE {UART0_BASE, UART1_BASE, UART2_BASE, UART3_BASE}
#endif
#include <asm/processor.h>
#if defined(CONFIG_440)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000300
-#define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000400
-#define UART2_BASE CFG_PERIPHERAL_BASE + 0x00000500
-#define UART3_BASE CFG_PERIPHERAL_BASE + 0x00000600
+#define UART0_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000300
+#define UART1_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000400
+#define UART2_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000500
+#define UART3_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000600
#else
-#define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000200
-#define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000300
+#define UART0_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000200
+#define UART1_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000300
#endif
#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-#define UART2_BASE CFG_PERIPHERAL_BASE + 0x00000600
+#define UART2_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000600
#endif
#if defined(CONFIG_440GP)
#define UDIV_SUBTRACT 0
#define UART0_SDR sdr_uart0
#define UART1_SDR sdr_uart1
-#if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \
- defined(CONFIG_440GR) || defined(CONFIG_440GRx) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPe)
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
#define UART2_SDR sdr_uart2
#endif
-#if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \
- defined(CONFIG_440GR) || defined(CONFIG_440GRx)
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRX)
#define UART3_SDR sdr_uart3
#endif
#define MFREG(a, d) mfsdr(a, d)
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_440) || defined(CONFIG_405EX)
-#if !defined(CFG_EXT_SERIAL_CLOCK)
+#if !defined(CONFIG_SYS_EXT_SERIAL_CLOCK)
static void serial_divs (int baudrate, unsigned long *pudiv,
unsigned short *pbdiv)
{
unsigned long udiv;
unsigned short bdiv;
volatile char val;
-#ifdef CFG_EXT_SERIAL_CLOCK
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
unsigned long tmp;
#endif
int i;
MFREG(UART0_SDR, reg);
reg &= ~CR0_MASK;
-#ifdef CFG_EXT_SERIAL_CLOCK
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
reg |= CR0_EXTCLK_ENA;
udiv = 1;
tmp = gd->baudrate * 16;
- bdiv = (CFG_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
+ bdiv = (CONFIG_SYS_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
#else
/* For 440, the cpu clock is on divider chain A, UART on divider
* chain B ... so cpu clock is irrelevant. Get the "optimized"
#ifdef CONFIG_405EP
reg = mfdcr(cpc0_ucr) & ~(UCR0_MASK | UCR1_MASK);
clk = gd->cpu_clk;
- tmp = CFG_BASE_BAUD * 16;
+ tmp = CONFIG_SYS_BASE_BAUD * 16;
udiv = (clk + tmp / 2) / tmp;
if (udiv > UDIV_MAX) /* max. n bits for udiv */
udiv = UDIV_MAX;
mtdcr (cpc0_ucr, reg);
#else /* CONFIG_405EP */
reg = mfdcr(cntrl0) & ~CR0_MASK;
-#ifdef CFG_EXT_SERIAL_CLOCK
- clk = CFG_EXT_SERIAL_CLOCK;
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
+ clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
udiv = 1;
reg |= CR0_EXTCLK_ENA;
#else
clk = gd->cpu_clk;
-#ifdef CFG_405_UART_ERRATA_59
+#ifdef CONFIG_SYS_405_UART_ERRATA_59
udiv = 31; /* Errata 59: stuck at 31 */
#else
- tmp = CFG_BASE_BAUD * 16;
+ tmp = CONFIG_SYS_BASE_BAUD * 16;
udiv = (clk + tmp / 2) / tmp;
if (udiv > UDIV_MAX) /* max. n bits for udiv */
udiv = UDIV_MAX;
int uart_post_test (int flags)
{
int i, res = 0;
- static unsigned long base[] = CFG_POST_UART_TABLE;
+ static unsigned long base[] = CONFIG_SYS_POST_UART_TABLE;
for (i = 0; i < sizeof (base) / sizeof (base[0]); i++) {
if (test_ctlr (base[i], i))
return res;
}
-#endif /* CONFIG_POST & CFG_POST_UART */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_UART */