* characters are transmitted.
*/
-#ifdef CONFIG_POST
-
#include <post.h>
-#if CONFIG_POST & CFG_POST_UART
+#if CONFIG_POST & CONFIG_SYS_POST_UART
+
+/*
+ * This table defines the UART's that should be tested and can
+ * be overridden in the board config file
+ */
+#ifndef CONFIG_SYS_POST_UART_TABLE
+#define CONFIG_SYS_POST_UART_TABLE {UART0_BASE, UART1_BASE, UART2_BASE, UART3_BASE}
+#endif
#include <asm/processor.h>
#include <serial.h>
-#define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000300
-#define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000400
-#define UART2_BASE CFG_PERIPHERAL_BASE + 0x00000500
-#define UART3_BASE CFG_PERIPHERAL_BASE + 0x00000600
+#if defined(CONFIG_440)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define UART0_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000300
+#define UART1_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000400
+#define UART2_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000500
+#define UART3_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000600
+#else
+#define UART0_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000200
+#define UART1_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000300
+#endif
+
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#define UART2_BASE CONFIG_SYS_PERIPHERAL_BASE + 0x00000600
+#endif
+#if defined(CONFIG_440GP)
+#define CR0_MASK 0x3fff0000
+#define CR0_EXTCLK_ENA 0x00600000
+#define CR0_UDIV_POS 16
+#define UDIV_SUBTRACT 1
+#define UART0_SDR cntrl0
+#define MFREG(a, d) d = mfdcr(a)
+#define MTREG(a, d) mtdcr(a, d)
+#else /* #if defined(CONFIG_440GP) */
+/* all other 440 PPC's access clock divider via sdr register */
#define CR0_MASK 0xdfffffff
#define CR0_EXTCLK_ENA 0x00800000
#define CR0_UDIV_POS 0
#define UDIV_SUBTRACT 0
#define UART0_SDR sdr_uart0
#define UART1_SDR sdr_uart1
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
#define UART2_SDR sdr_uart2
+#endif
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRX)
#define UART3_SDR sdr_uart3
+#endif
+#define MFREG(a, d) mfsdr(a, d)
+#define MTREG(a, d) mtsdr(a, d)
+#endif /* #if defined(CONFIG_440GP) */
+#elif defined(CONFIG_405EP) || defined(CONFIG_405EZ)
+#define UART0_BASE 0xef600300
+#define UART1_BASE 0xef600400
+#define UCR0_MASK 0x0000007f
+#define UCR1_MASK 0x00007f00
+#define UCR0_UDIV_POS 0
+#define UCR1_UDIV_POS 8
+#define UDIV_MAX 127
+#elif defined(CONFIG_405EX)
+#define UART0_BASE 0xef600200
+#define UART1_BASE 0xef600300
+#define CR0_MASK 0x000000ff
+#define CR0_EXTCLK_ENA 0x00800000
+#define CR0_UDIV_POS 0
+#define UDIV_SUBTRACT 0
+#define UART0_SDR sdr_uart0
+#define UART1_SDR sdr_uart1
#define MFREG(a, d) mfsdr(a, d)
#define MTREG(a, d) mtsdr(a, d)
+#else /* CONFIG_405GP || CONFIG_405CR */
+#define UART0_BASE 0xef600300
+#define UART1_BASE 0xef600400
+#define CR0_MASK 0x00001fff
+#define CR0_EXTCLK_ENA 0x000000c0
+#define CR0_UDIV_POS 1
+#define UDIV_MAX 32
+#endif
#define UART_RBR 0x00
#define UART_THR 0x00
#define UART_DLM 0x01
/*
- Line Status Register.
-*/
+ * Line Status Register.
+ */
#define asyncLSRDataReady1 0x01
#define asyncLSROverrunError1 0x02
#define asyncLSRParityError1 0x04
DECLARE_GLOBAL_DATA_PTR;
+#if defined(CONFIG_440) || defined(CONFIG_405EX)
+#if !defined(CONFIG_SYS_EXT_SERIAL_CLOCK)
+static void serial_divs (int baudrate, unsigned long *pudiv,
+ unsigned short *pbdiv)
+{
+ sys_info_t sysinfo;
+ unsigned long div; /* total divisor udiv * bdiv */
+ unsigned long umin; /* minimum udiv */
+ unsigned short diff; /* smallest diff */
+ unsigned long udiv; /* best udiv */
+ unsigned short idiff; /* current diff */
+ unsigned short ibdiv; /* current bdiv */
+ unsigned long i;
+ unsigned long est; /* current estimate */
+
+ get_sys_info(&sysinfo);
+
+ udiv = 32; /* Assume lowest possible serial clk */
+ div = sysinfo.freqPLB / (16 * baudrate); /* total divisor */
+ umin = sysinfo.pllOpbDiv << 1; /* 2 x OPB divisor */
+ diff = 32; /* highest possible */
+
+ /* i is the test udiv value -- start with the largest
+ * possible (32) to minimize serial clock and constrain
+ * search to umin.
+ */
+ for (i = 32; i > umin; i--) {
+ ibdiv = div / i;
+ est = i * ibdiv;
+ idiff = (est > div) ? (est-div) : (div-est);
+ if (idiff == 0) {
+ udiv = i;
+ break; /* can't do better */
+ } else if (idiff < diff) {
+ udiv = i; /* best so far */
+ diff = idiff; /* update lowest diff*/
+ }
+ }
+
+ *pudiv = udiv;
+ *pbdiv = div / udiv;
+}
+#endif
+
static int uart_post_init (unsigned long dev_base)
{
- unsigned long reg;
+ unsigned long reg = 0;
unsigned long udiv;
unsigned short bdiv;
volatile char val;
-#ifdef CFG_EXT_SERIAL_CLOCK
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
unsigned long tmp;
#endif
int i;
MFREG(UART0_SDR, reg);
reg &= ~CR0_MASK;
-#ifdef CFG_EXT_SERIAL_CLOCK
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
reg |= CR0_EXTCLK_ENA;
udiv = 1;
tmp = gd->baudrate * 16;
- bdiv = (CFG_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
+ bdiv = (CONFIG_SYS_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
#else
/* For 440, the cpu clock is on divider chain A, UART on divider
* chain B ... so cpu clock is irrelevant. Get the "optimized"
return 0;
}
+#else /* CONFIG_440 */
+
+static int uart_post_init (unsigned long dev_base)
+{
+ unsigned long reg;
+ unsigned long tmp;
+ unsigned long clk;
+ unsigned long udiv;
+ unsigned short bdiv;
+ volatile char val;
+ int i;
+
+ for (i = 0; i < 3500; i++) {
+ if (in8 (dev_base + UART_LSR) & asyncLSRTxHoldEmpty1)
+ break;
+ udelay (100);
+ }
+
+#if defined(CONFIG_405EZ)
+ serial_divs(gd->baudrate, &udiv, &bdiv);
+ clk = tmp = reg = 0;
+#else
+#ifdef CONFIG_405EP
+ reg = mfdcr(cpc0_ucr) & ~(UCR0_MASK | UCR1_MASK);
+ clk = gd->cpu_clk;
+ tmp = CONFIG_SYS_BASE_BAUD * 16;
+ udiv = (clk + tmp / 2) / tmp;
+ if (udiv > UDIV_MAX) /* max. n bits for udiv */
+ udiv = UDIV_MAX;
+ reg |= (udiv) << UCR0_UDIV_POS; /* set the UART divisor */
+ reg |= (udiv) << UCR1_UDIV_POS; /* set the UART divisor */
+ mtdcr (cpc0_ucr, reg);
+#else /* CONFIG_405EP */
+ reg = mfdcr(cntrl0) & ~CR0_MASK;
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
+ clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
+ udiv = 1;
+ reg |= CR0_EXTCLK_ENA;
+#else
+ clk = gd->cpu_clk;
+#ifdef CONFIG_SYS_405_UART_ERRATA_59
+ udiv = 31; /* Errata 59: stuck at 31 */
+#else
+ tmp = CONFIG_SYS_BASE_BAUD * 16;
+ udiv = (clk + tmp / 2) / tmp;
+ if (udiv > UDIV_MAX) /* max. n bits for udiv */
+ udiv = UDIV_MAX;
+#endif
+#endif
+ reg |= (udiv - 1) << CR0_UDIV_POS; /* set the UART divisor */
+ mtdcr (cntrl0, reg);
+#endif /* CONFIG_405EP */
+ tmp = gd->baudrate * udiv * 16;
+ bdiv = (clk + tmp / 2) / tmp;
+#endif /* CONFIG_405EZ */
+
+ out8(dev_base + UART_LCR, 0x80); /* set DLAB bit */
+ out8(dev_base + UART_DLL, bdiv); /* set baudrate divisor */
+ out8(dev_base + UART_DLM, bdiv >> 8); /* set baudrate divisor */
+ out8(dev_base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
+ out8(dev_base + UART_FCR, 0x00); /* disable FIFO */
+ out8(dev_base + UART_MCR, 0x10); /* enable loopback mode */
+ val = in8(dev_base + UART_LSR); /* clear line status */
+ val = in8(dev_base + UART_RBR); /* read receive buffer */
+ out8(dev_base + UART_SCR, 0x00); /* set scratchpad */
+ out8(dev_base + UART_IER, 0x00); /* set interrupt enable reg */
+
+ return (0);
+}
+#endif /* CONFIG_440 */
+
static void uart_post_putc (unsigned long dev_base, char c)
{
int i;
int uart_post_test (int flags)
{
int i, res = 0;
- static unsigned long base[] = {
- UART0_BASE, UART1_BASE, UART2_BASE, UART3_BASE
- };
+ static unsigned long base[] = CONFIG_SYS_POST_UART_TABLE;
for (i = 0; i < sizeof (base) / sizeof (base[0]); i++) {
if (test_ctlr (base[i], i))
return res;
}
-#endif /* CONFIG_POST & CFG_POST_UART */
-#endif /* CONFIG_POST */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_UART */