Squashed 'dts/upstream/' changes from aaba2d45dc2a..b35b9bd1d4ee

[thirdparty/u-boot.git] / src / arm64 / qcom / qrb2210-rb1.dts

diff --git a/src/arm64/qcom/qrb2210-rb1.dts b/src/arm64/qcom/qrb2210-rb1.dts
index 94885b9c21c89d0412e071c1e8145d093dfc4097..aa53b6af6d9cbd1c1331f0ddf06a7aab70336eb3 100644 (file)
--- a/src/arm64/qcom/qrb2210-rb1.dts
+++ b/src/arm64/qcom/qrb2210-rb1.dts
@@ -23,6 +23,14 @@
                stdout-path = "serial0:115200n8";
        };
 
+       clocks {
+               clk40M: can-clk {
+                       compatible = "fixed-clock";
+                       clock-frequency = <40000000>;
+                       #clock-cells = <0>;
+               };
+       };
+
        gpio-keys {
                compatible = "gpio-keys";
                label = "gpio-keys";
@@ -40,6 +48,17 @@
                };
        };
 
+       hdmi-connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con: endpoint {
+                               remote-endpoint = <&lt9611_out>;
+                       };
+               };
+       };
+
        leds {
                compatible = "gpio-leds";
 
@@ -158,6 +177,68 @@
        };
 };
 
+&gpi_dma0 {
+       status = "okay";
+};
+
+&i2c2 {
+       clock-frequency = <400000>;
+       status = "okay";
+
+       lt9611_codec: hdmi-bridge@2b {
+               compatible = "lontium,lt9611uxc";
+               reg = <0x2b>;
+               interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;
+               reset-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
+
+               vdd-supply = <&vreg_hdmi_out_1p2>;
+               vcc-supply = <&lt9611_3v3>;
+
+               pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
+               pinctrl-names = "default";
+               #sound-dai-cells = <1>;
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+
+                               lt9611_a: endpoint {
+                                       remote-endpoint = <&mdss_dsi0_out>;
+                               };
+                       };
+
+                       port@2 {
+                               reg = <2>;
+
+                               lt9611_out: endpoint {
+                                       remote-endpoint = <&hdmi_con>;
+                               };
+                       };
+               };
+       };
+};
+
+&mdss {
+       status = "okay";
+};
+
+&mdss_dsi0 {
+       vdda-supply = <&pm2250_l5>;
+       status = "okay";
+};
+
+&mdss_dsi0_out {
+       remote-endpoint = <&lt9611_a>;
+       data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+       status = "okay";
+};
+
 &pm2250_resin {
        linux,code = <KEY_VOLUMEDOWN>;
        status = "okay";
@@ -376,7 +457,34 @@
        status = "okay";
 };
 
+&spi5 {
+       status = "okay";
+
+       can@0 {
+               compatible = "microchip,mcp2518fd";
+               reg = <0>;
+               interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>;
+               clocks = <&clk40M>;
+               spi-max-frequency = <10000000>;
+               vdd-supply = <&vdc_5v>;
+               xceiver-supply = <&vdc_5v>;
+       };
+};
+
 &tlmm {
+       lt9611_rst_pin: lt9611-rst-state {
+               pins = "gpio41";
+               function = "gpio";
+               input-disable;
+               output-high;
+       };
+
+       lt9611_irq_pin: lt9611-irq-state {
+               pins = "gpio46";
+               function = "gpio";
+               bias-disable;
+       };
+
        sd_det_in_on: sd-det-in-on-state {
                pins = "gpio88";
                function = "gpio";
@@ -415,6 +523,10 @@
        status = "okay";
 };
 
+&usb_dwc3 {
+       dr_mode = "host";
+};
+
 &usb_hsphy {
        vdd-supply = <&pm2250_l12>;
        vdda-pll-supply = <&pm2250_l13>;
@@ -427,6 +539,7 @@
        vdd-1.8-xo-supply = <&pm2250_l13>;
        vdd-1.3-rfa-supply = <&pm2250_l10>;
        vdd-3.3-ch0-supply = <&pm2250_l22>;
+       qcom,ath10k-calibration-variant = "Thundercomm_RB1";
        status = "okay";
 };