import logging
logger = logging.getLogger()
import os
+import socket
+import SocketServer
import hwsim_utils
import hostapd
-from utils import HwsimSkip, alloc_fail, fail_test, skip_with_fips
+from utils import HwsimSkip, alloc_fail, fail_test, skip_with_fips, wait_fail_trigger
from wpasupplicant import WpaSupplicant
from test_ap_psk import check_mib, find_wpas_process, read_process_memory, verify_not_present, get_key_locations
if not tls.startswith("OpenSSL"):
raise HwsimSkip("altsubject_match not supported with this TLS library: " + tls)
+def check_domain_match(dev):
+ tls = dev.request("GET tls_library")
+ if tls.startswith("internal"):
+ raise HwsimSkip("domain_match not supported with this TLS library: " + tls)
+
+def check_domain_suffix_match(dev):
+ tls = dev.request("GET tls_library")
+ if tls.startswith("internal"):
+ raise HwsimSkip("domain_suffix_match not supported with this TLS library: " + tls)
+
def check_domain_match_full(dev):
tls = dev.request("GET tls_library")
if not tls.startswith("OpenSSL"):
def check_cert_probe_support(dev):
tls = dev.request("GET tls_library")
- if not tls.startswith("OpenSSL"):
+ if not tls.startswith("OpenSSL") and not tls.startswith("internal"):
raise HwsimSkip("Certificate probing not supported with this TLS library: " + tls)
def check_ocsp_support(dev):
tls = dev.request("GET tls_library")
- if "BoringSSL" in tls:
+ if tls.startswith("internal"):
raise HwsimSkip("OCSP not supported with this TLS library: " + tls)
+ #if "BoringSSL" in tls:
+ # raise HwsimSkip("OCSP not supported with this TLS library: " + tls)
+
+def check_pkcs12_support(dev):
+ tls = dev.request("GET tls_library")
+ if tls.startswith("internal"):
+ raise HwsimSkip("PKCS#12 not supported with this TLS library: " + tls)
+
+def check_dh_dsa_support(dev):
+ tls = dev.request("GET tls_library")
+ if tls.startswith("internal"):
+ raise HwsimSkip("DH DSA not supported with this TLS library: " + tls)
def read_pem(fname):
with open(fname, "r") as f:
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
time.sleep(0.1)
+ dev[0].dump_monitor()
dev[0].select_network(id, freq="2412")
ev = dev[0].wait_event(["CTRL-REQ-SIM"], timeout=15)
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
time.sleep(0.1)
+ dev[0].dump_monitor()
tests = [ ":UMTS-AUTH:00112233445566778899aabbccddeeff:00112233445566778899aabbccddeeff:0011223344",
":UMTS-AUTH:34",
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
time.sleep(0.1)
+ dev[0].dump_monitor()
def test_ap_wpa2_eap_aka_prime(dev, apdev):
"""WPA2-Enterprise connection using EAP-AKA'"""
def test_ap_wpa2_eap_ttls_mschap(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/MSCHAP"""
skip_with_fips(dev[0])
+ check_domain_suffix_match(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "mschap user",
def test_ap_wpa2_eap_ttls_mschapv2(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/MSCHAPv2"""
+ check_domain_suffix_match(dev[0])
check_eap_capa(dev[0], "MSCHAPV2")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
def test_ap_wpa2_eap_ttls_mschapv2_domain_match(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/MSCHAPv2 (domain_match)"""
+ check_domain_match(dev[0])
skip_with_fips(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
anonymous_identity="ttls",
password_hex="hash:bd5844fad2489992da7fe8c5a01559cf",
ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2")
+ for p in [ "80", "41c041e04141e041", 257*"41" ]:
+ dev[2].connect("test-wpa2-eap", key_mgmt="WPA-EAP",
+ eap="TTLS", identity="utf8-user-hash",
+ anonymous_identity="ttls", password_hex=p,
+ ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
+ wait_connect=False, scan_freq="2412")
+ ev = dev[2].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=1)
+ if ev is None:
+ raise Exception("No failure reported")
+ dev[2].request("REMOVE_NETWORK all")
+ dev[2].wait_disconnected()
def test_ap_wpa2_eap_ttls_eap_gtc(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS/EAP-GTC"""
private_key="auth_serv/user.key")
eap_reauth(dev[0], "TLS")
+def test_eap_tls_pkcs8_pkcs5_v2_des3(dev, apdev):
+ """WPA2-Enterprise connection using EAP-TLS and PKCS #8, PKCS #5 v2 DES3 key"""
+ params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
+ hostapd.add_ap(apdev[0]['ifname'], params)
+ eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
+ client_cert="auth_serv/user.pem",
+ private_key="auth_serv/user.key.pkcs8",
+ private_key_passwd="whatever")
+
+def test_eap_tls_pkcs8_pkcs5_v15(dev, apdev):
+ """WPA2-Enterprise connection using EAP-TLS and PKCS #8, PKCS #5 v1.5 key"""
+ params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
+ hostapd.add_ap(apdev[0]['ifname'], params)
+ eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
+ client_cert="auth_serv/user.pem",
+ private_key="auth_serv/user.key.pkcs8.pkcs5v15",
+ private_key_passwd="whatever")
+
def test_ap_wpa2_eap_tls_blob(dev, apdev):
"""WPA2-Enterprise connection using EAP-TLS and config blobs"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
def test_ap_wpa2_eap_tls_pkcs12(dev, apdev):
"""WPA2-Enterprise connection using EAP-TLS and PKCS#12"""
+ check_pkcs12_support(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TLS", "tls user", ca_cert="auth_serv/ca.pem",
def test_ap_wpa2_eap_tls_pkcs12_blob(dev, apdev):
"""WPA2-Enterprise connection using EAP-TLS and PKCS#12 from configuration blob"""
+ check_pkcs12_support(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
cert = read_pem("auth_serv/ca.pem")
def test_ap_wpa2_eap_tls_neg_suffix_match(dev, apdev):
"""WPA2-Enterprise negative test - domain suffix mismatch"""
+ check_domain_suffix_match(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
def test_ap_wpa2_eap_tls_neg_domain_match(dev, apdev):
"""WPA2-Enterprise negative test - domain mismatch"""
+ check_domain_match(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
"""WPA2-Enterprise connection using EAP-TTLS and server certificate hash"""
check_cert_probe_support(dev[0])
skip_with_fips(dev[0])
- srv_cert_hash = "1477c9cd88391609444b83eca45c4f9f324e3051c5c31fc233ac6aede30ce7cd"
+ srv_cert_hash = "e75bd454c7b02d312e5006d75067c28ffa5baea422effeb2bbd572179cd000ca"
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
params = { "ssid": "test-wpa2-eap", "wpa": "2", "wpa_key_mgmt": "WPA-EAP",
"rsn_pairwise": "CCMP", "ieee8021x": "1",
"eap_server": "1", "eap_user_file": "auth_serv/eap_user.conf" }
- for i in [ 19, 20, 21, 25, 26 ]:
+ groups = [ 19, 20, 21, 25, 26 ]
+ if tls.startswith("OpenSSL") and "build=OpenSSL 1.0.2" in tls and "run=OpenSSL 1.0.2" in tls:
+ logger.info("Add Brainpool EC groups since OpenSSL is new enough")
+ groups += [ 27, 28, 29, 30 ]
+ for i in groups:
+ logger.info("Group %d" % i)
params['pwd_group'] = str(i)
hostapd.add_ap(apdev[0]['ifname'], params)
- dev[0].request("REMOVE_NETWORK all")
try:
eap_connect(dev[0], apdev[0], "PWD", "pwd user",
password="secret password")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+ dev[0].dump_monitor()
except:
if "BoringSSL" in tls and i in [ 25 ]:
logger.info("Ignore connection failure with group %d with BoringSSL" % i)
dev[0].request("DISCONNECT")
time.sleep(0.1)
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].dump_monitor()
continue
raise
dev[0].wait_connected(timeout=10)
dev[0].request("REMOVE_NETWORK all")
+def test_ap_wpa2_eap_ext_enable_network_while_connected(dev, apdev):
+ """WPA2-Enterprise interactive identity entry and ENABLE_NETWORK"""
+ check_eap_capa(dev[0], "MSCHAPV2")
+ params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
+ hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.Hostapd(apdev[0]['ifname'])
+
+ id_other = dev[0].connect("other", key_mgmt="NONE", scan_freq="2412",
+ only_add_network=True)
+
+ req_id = "DOMAIN\mschapv2 user"
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TTLS",
+ anonymous_identity="ttls", identity=None,
+ password="password",
+ ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
+ wait_connect=False, scan_freq="2412")
+ ev = dev[0].wait_event(["CTRL-REQ-IDENTITY"])
+ if ev is None:
+ raise Exception("Request for identity timed out")
+ id = ev.split(':')[0].split('-')[-1]
+ dev[0].request("CTRL-RSP-IDENTITY-" + id + ":" + req_id)
+ dev[0].wait_connected(timeout=10)
+
+ if "OK" not in dev[0].request("ENABLE_NETWORK " + str(id_other)):
+ raise Exception("Failed to enable network")
+ ev = dev[0].wait_event(["SME: Trying to authenticate"], timeout=1)
+ if ev is not None:
+ raise Exception("Unexpected reconnection attempt on ENABLE_NETWORK")
+ dev[0].request("REMOVE_NETWORK all")
+
def test_ap_wpa2_eap_vendor_test(dev, apdev):
"""WPA2-Enterprise connection using EAP vendor test"""
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
def test_ap_wpa2_eap_fast_prf_oom(dev, apdev):
"""WPA2-Enterprise connection using EAP-FAST and OOM in PRF"""
check_eap_capa(dev[0], "FAST")
+ tls = dev[0].request("GET tls_library")
+ if tls.startswith("OpenSSL"):
+ func = "openssl_tls_prf"
+ count = 2
+ elif tls.startswith("internal"):
+ func = "tls_connection_prf"
+ count = 1
+ else:
+ raise HwsimSkip("Unsupported TLS library")
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- with alloc_fail(dev[0], 2, "openssl_tls_prf"):
+ with alloc_fail(dev[0], count, func):
dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="FAST",
identity="user", anonymous_identity="FAST",
password="password", ca_cert="auth_serv/ca.pem",
"private_key": "auth_serv/server.key" }
return params
+def test_ap_wpa2_eap_tls_ocsp_ca_signed_good(dev, apdev, params):
+ """EAP-TLS and CA signed OCSP response (good)"""
+ check_ocsp_support(dev[0])
+ ocsp = os.path.join(params['logdir'], "ocsp-resp-ca-signed.der")
+ if not os.path.exists(ocsp):
+ raise HwsimSkip("No OCSP response available")
+ params = int_eap_server_params()
+ params["ocsp_stapling_response"] = ocsp
+ hostapd.add_ap(apdev[0]['ifname'], params)
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
+ identity="tls user", ca_cert="auth_serv/ca.pem",
+ private_key="auth_serv/user.pkcs12",
+ private_key_passwd="whatever", ocsp=2,
+ scan_freq="2412")
+
+def test_ap_wpa2_eap_tls_ocsp_ca_signed_revoked(dev, apdev, params):
+ """EAP-TLS and CA signed OCSP response (revoked)"""
+ check_ocsp_support(dev[0])
+ ocsp = os.path.join(params['logdir'], "ocsp-resp-ca-signed-revoked.der")
+ if not os.path.exists(ocsp):
+ raise HwsimSkip("No OCSP response available")
+ params = int_eap_server_params()
+ params["ocsp_stapling_response"] = ocsp
+ hostapd.add_ap(apdev[0]['ifname'], params)
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
+ identity="tls user", ca_cert="auth_serv/ca.pem",
+ private_key="auth_serv/user.pkcs12",
+ private_key_passwd="whatever", ocsp=2,
+ wait_connect=False, scan_freq="2412")
+ count = 0
+ while True:
+ ev = dev[0].wait_event(["CTRL-EVENT-EAP-STATUS"])
+ if ev is None:
+ raise Exception("Timeout on EAP status")
+ if 'bad certificate status response' in ev:
+ break
+ if 'certificate revoked' in ev:
+ break
+ count = count + 1
+ if count > 10:
+ raise Exception("Unexpected number of EAP status messages")
+
+ ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"])
+ if ev is None:
+ raise Exception("Timeout on EAP failure report")
+
+def test_ap_wpa2_eap_tls_ocsp_ca_signed_unknown(dev, apdev, params):
+ """EAP-TLS and CA signed OCSP response (unknown)"""
+ check_ocsp_support(dev[0])
+ ocsp = os.path.join(params['logdir'], "ocsp-resp-ca-signed-unknown.der")
+ if not os.path.exists(ocsp):
+ raise HwsimSkip("No OCSP response available")
+ params = int_eap_server_params()
+ params["ocsp_stapling_response"] = ocsp
+ hostapd.add_ap(apdev[0]['ifname'], params)
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
+ identity="tls user", ca_cert="auth_serv/ca.pem",
+ private_key="auth_serv/user.pkcs12",
+ private_key_passwd="whatever", ocsp=2,
+ wait_connect=False, scan_freq="2412")
+ count = 0
+ while True:
+ ev = dev[0].wait_event(["CTRL-EVENT-EAP-STATUS"])
+ if ev is None:
+ raise Exception("Timeout on EAP status")
+ if 'bad certificate status response' in ev:
+ break
+ count = count + 1
+ if count > 10:
+ raise Exception("Unexpected number of EAP status messages")
+
+ ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"])
+ if ev is None:
+ raise Exception("Timeout on EAP failure report")
+
+def test_ap_wpa2_eap_tls_ocsp_server_signed(dev, apdev, params):
+ """EAP-TLS and server signed OCSP response"""
+ check_ocsp_support(dev[0])
+ ocsp = os.path.join(params['logdir'], "ocsp-resp-server-signed.der")
+ if not os.path.exists(ocsp):
+ raise HwsimSkip("No OCSP response available")
+ params = int_eap_server_params()
+ params["ocsp_stapling_response"] = ocsp
+ hostapd.add_ap(apdev[0]['ifname'], params)
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
+ identity="tls user", ca_cert="auth_serv/ca.pem",
+ private_key="auth_serv/user.pkcs12",
+ private_key_passwd="whatever", ocsp=2,
+ wait_connect=False, scan_freq="2412")
+ count = 0
+ while True:
+ ev = dev[0].wait_event(["CTRL-EVENT-EAP-STATUS"])
+ if ev is None:
+ raise Exception("Timeout on EAP status")
+ if 'bad certificate status response' in ev:
+ break
+ count = count + 1
+ if count > 10:
+ raise Exception("Unexpected number of EAP status messages")
+
+ ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"])
+ if ev is None:
+ raise Exception("Timeout on EAP failure report")
+
def test_ap_wpa2_eap_tls_ocsp_invalid_data(dev, apdev):
"""WPA2-Enterprise connection using EAP-TLS and invalid OCSP data"""
check_ocsp_support(dev[0])
def test_ap_wpa2_eap_tls_domain_suffix_match_cn_full(dev, apdev):
"""WPA2-Enterprise using EAP-TLS and domain suffix match (CN)"""
+ check_domain_match_full(dev[0])
params = int_eap_server_params()
params["server_cert"] = "auth_serv/server-no-dnsname.pem"
params["private_key"] = "auth_serv/server-no-dnsname.key"
def test_ap_wpa2_eap_tls_domain_match_cn(dev, apdev):
"""WPA2-Enterprise using EAP-TLS and domainmatch (CN)"""
+ check_domain_match(dev[0])
params = int_eap_server_params()
params["server_cert"] = "auth_serv/server-no-dnsname.pem"
params["private_key"] = "auth_serv/server-no-dnsname.key"
def test_ap_wpa2_eap_tls_domain_suffix_mismatch_cn(dev, apdev):
"""WPA2-Enterprise using EAP-TLS and domain suffix mismatch (CN)"""
+ check_domain_suffix_match(dev[0])
params = int_eap_server_params()
params["server_cert"] = "auth_serv/server-no-dnsname.pem"
params["private_key"] = "auth_serv/server-no-dnsname.key"
def test_ap_wpa2_eap_tls_domain_mismatch_cn(dev, apdev):
"""WPA2-Enterprise using EAP-TLS and domain mismatch (CN)"""
+ check_domain_match(dev[0])
params = int_eap_server_params()
params["server_cert"] = "auth_serv/server-no-dnsname.pem"
params["private_key"] = "auth_serv/server-no-dnsname.key"
def test_ap_wpa2_eap_ttls_dh_params_dsa(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS and setting DH params (DSA)"""
+ check_dh_dsa_support(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
hostapd.add_ap(apdev[0]['ifname'], params)
eap_connect(dev[0], apdev[0], "TTLS", "pap user",
if tk in buf:
raise Exception("TK found from memory")
if gtk in buf:
+ get_key_locations(buf, gtk, "GTK")
raise Exception("GTK found from memory")
logger.info("Checking keys in memory after disassociation")
subprocess.call(['iw', ifname, 'set', '4addr', 'on'])
subprocess.check_call(['brctl', 'addif', br_ifname, ifname])
wpas.interface_add(ifname, br_ifname=br_ifname)
+ wpas.dump_monitor()
id = eap_connect(wpas, apdev[0], "PAX", "pax.user@example.com",
password_hex="0123456789abcdef0123456789abcdef")
+ wpas.dump_monitor()
eap_reauth(wpas, "PAX")
+ wpas.dump_monitor()
# Try again as a regression test for packet socket workaround
eap_reauth(wpas, "PAX")
+ wpas.dump_monitor()
wpas.request("DISCONNECT")
wpas.wait_disconnected()
+ wpas.dump_monitor()
wpas.request("RECONNECT")
wpas.wait_connected()
+ wpas.dump_monitor()
def test_ap_wpa2_eap_session_ticket(dev, apdev):
"""WPA2-Enterprise connection using EAP-TTLS and TLS session ticket enabled"""
"""EAP-TLS and OOM"""
check_subject_match_support(dev[0])
check_altsubject_match_support(dev[0])
+ check_domain_match(dev[0])
check_domain_match_full(dev[0])
params = hostapd.wpa2_eap_params(ssid="test-wpa2-eap")
check_tls_ver(dev[0], apdev[0],
"tls_disable_tlsv1_0=1 tls_disable_tlsv1_1=1",
"TLSv1.2")
+ elif tls.startswith("internal"):
+ check_tls_ver(dev[0], apdev[0],
+ "tls_disable_tlsv1_0=1 tls_disable_tlsv1_1=1", "TLSv1.2")
check_tls_ver(dev[1], apdev[0],
"tls_disable_tlsv1_0=1 tls_disable_tlsv1_2=1", "TLSv1.1")
check_tls_ver(dev[2], apdev[0],
def test_eap_ttls_mschap_session_resumption(dev, apdev):
"""EAP-TTLS/MSCHAP session resumption"""
+ check_domain_suffix_match(dev[0])
params = int_eap_server_params()
params['tls_session_lifetime'] = '60'
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
def test_eap_ttls_mschapv2_session_resumption(dev, apdev):
"""EAP-TTLS/MSCHAPv2 session resumption"""
+ check_domain_suffix_match(dev[0])
check_eap_capa(dev[0], "MSCHAPV2")
params = int_eap_server_params()
params['tls_session_lifetime'] = '60'
raise Exception("Key handshake with the AP timed out")
if dev[0].get_status_field("tls_session_reused") != '0':
raise Exception("Unexpected session resumption on the second connection")
+
+def test_eap_mschapv2_errors(dev, apdev):
+ """EAP-MSCHAPv2 error cases"""
+ check_eap_capa(dev[0], "MSCHAPV2")
+ check_eap_capa(dev[0], "FAST")
+
+ params = hostapd.wpa2_eap_params(ssid="test-wpa-eap")
+ hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ dev[0].connect("test-wpa-eap", key_mgmt="WPA-EAP", eap="MSCHAPV2",
+ identity="phase1-user", password="password",
+ scan_freq="2412")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+ tests = [ (1, "hash_nt_password_hash;mschapv2_derive_response"),
+ (1, "nt_password_hash;mschapv2_derive_response"),
+ (1, "nt_password_hash;=mschapv2_derive_response"),
+ (1, "generate_nt_response;mschapv2_derive_response"),
+ (1, "generate_authenticator_response;mschapv2_derive_response"),
+ (1, "nt_password_hash;=mschapv2_derive_response"),
+ (1, "get_master_key;mschapv2_derive_response"),
+ (1, "os_get_random;eap_mschapv2_challenge_reply") ]
+ for count, func in tests:
+ with fail_test(dev[0], count, func):
+ dev[0].connect("test-wpa-eap", key_mgmt="WPA-EAP", eap="MSCHAPV2",
+ identity="phase1-user", password="password",
+ wait_connect=False, scan_freq="2412")
+ wait_fail_trigger(dev[0], "GET_FAIL")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+ tests = [ (1, "hash_nt_password_hash;mschapv2_derive_response"),
+ (1, "hash_nt_password_hash;=mschapv2_derive_response"),
+ (1, "generate_nt_response_pwhash;mschapv2_derive_response"),
+ (1, "generate_authenticator_response_pwhash;mschapv2_derive_response") ]
+ for count, func in tests:
+ with fail_test(dev[0], count, func):
+ dev[0].connect("test-wpa-eap", key_mgmt="WPA-EAP", eap="MSCHAPV2",
+ identity="phase1-user",
+ password_hex="hash:8846f7eaee8fb117ad06bdd830b7586c",
+ wait_connect=False, scan_freq="2412")
+ wait_fail_trigger(dev[0], "GET_FAIL")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+ tests = [ (1, "eap_mschapv2_init"),
+ (1, "eap_msg_alloc;eap_mschapv2_challenge_reply"),
+ (1, "eap_msg_alloc;eap_mschapv2_success"),
+ (1, "eap_mschapv2_getKey") ]
+ for count, func in tests:
+ with alloc_fail(dev[0], count, func):
+ dev[0].connect("test-wpa-eap", key_mgmt="WPA-EAP", eap="MSCHAPV2",
+ identity="phase1-user", password="password",
+ wait_connect=False, scan_freq="2412")
+ wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+ tests = [ (1, "eap_msg_alloc;eap_mschapv2_failure") ]
+ for count, func in tests:
+ with alloc_fail(dev[0], count, func):
+ dev[0].connect("test-wpa-eap", key_mgmt="WPA-EAP", eap="MSCHAPV2",
+ identity="phase1-user", password="wrong password",
+ wait_connect=False, scan_freq="2412")
+ wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+ tests = [ (2, "eap_mschapv2_init"),
+ (3, "eap_mschapv2_init") ]
+ for count, func in tests:
+ with alloc_fail(dev[0], count, func):
+ dev[0].connect("test-wpa-eap", key_mgmt="WPA-EAP", eap="FAST",
+ anonymous_identity="FAST", identity="user",
+ password="password",
+ ca_cert="auth_serv/ca.pem", phase2="auth=MSCHAPV2",
+ phase1="fast_provisioning=1",
+ pac_file="blob://fast_pac",
+ wait_connect=False, scan_freq="2412")
+ wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+def test_eap_gpsk_errors(dev, apdev):
+ """EAP-GPSK error cases"""
+ params = hostapd.wpa2_eap_params(ssid="test-wpa-eap")
+ hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ dev[0].connect("test-wpa-eap", key_mgmt="WPA-EAP", eap="GPSK",
+ identity="gpsk user",
+ password="abcdefghijklmnop0123456789abcdef",
+ scan_freq="2412")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+ tests = [ (1, "os_get_random;eap_gpsk_send_gpsk_2", None),
+ (1, "eap_gpsk_derive_session_id;eap_gpsk_send_gpsk_2",
+ "cipher=1"),
+ (1, "eap_gpsk_derive_session_id;eap_gpsk_send_gpsk_2",
+ "cipher=2"),
+ (1, "eap_gpsk_derive_keys_helper", None),
+ (2, "eap_gpsk_derive_keys_helper", None),
+ (1, "eap_gpsk_compute_mic_aes;eap_gpsk_compute_mic;eap_gpsk_send_gpsk_2",
+ "cipher=1"),
+ (1, "hmac_sha256;eap_gpsk_compute_mic;eap_gpsk_send_gpsk_2",
+ "cipher=2"),
+ (1, "eap_gpsk_compute_mic;eap_gpsk_validate_gpsk_3_mic", None),
+ (1, "eap_gpsk_compute_mic;eap_gpsk_send_gpsk_4", None),
+ (1, "eap_gpsk_derive_mid_helper", None) ]
+ for count, func, phase1 in tests:
+ with fail_test(dev[0], count, func):
+ dev[0].connect("test-wpa-eap", key_mgmt="WPA-EAP", eap="GPSK",
+ identity="gpsk user",
+ password="abcdefghijklmnop0123456789abcdef",
+ phase1=phase1,
+ wait_connect=False, scan_freq="2412")
+ wait_fail_trigger(dev[0], "GET_FAIL")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+ tests = [ (1, "eap_gpsk_init"),
+ (2, "eap_gpsk_init"),
+ (3, "eap_gpsk_init"),
+ (1, "eap_gpsk_process_id_server"),
+ (1, "eap_msg_alloc;eap_gpsk_send_gpsk_2"),
+ (1, "eap_gpsk_derive_session_id;eap_gpsk_send_gpsk_2"),
+ (1, "eap_gpsk_derive_mid_helper;eap_gpsk_derive_session_id;eap_gpsk_send_gpsk_2"),
+ (1, "eap_gpsk_derive_keys"),
+ (1, "eap_gpsk_derive_keys_helper"),
+ (1, "eap_msg_alloc;eap_gpsk_send_gpsk_4"),
+ (1, "eap_gpsk_getKey"),
+ (1, "eap_gpsk_get_emsk"),
+ (1, "eap_gpsk_get_session_id") ]
+ for count, func in tests:
+ with alloc_fail(dev[0], count, func):
+ dev[0].request("ERP_FLUSH")
+ dev[0].connect("test-wpa-eap", key_mgmt="WPA-EAP", eap="GPSK",
+ identity="gpsk user", erp="1",
+ password="abcdefghijklmnop0123456789abcdef",
+ wait_connect=False, scan_freq="2412")
+ wait_fail_trigger(dev[0], "GET_ALLOC_FAIL")
+ dev[0].request("REMOVE_NETWORK all")
+ dev[0].wait_disconnected()
+
+def test_ap_wpa2_eap_sim_db(dev, apdev, params):
+ """EAP-SIM DB error cases"""
+ sockpath = '/tmp/hlr_auc_gw.sock-test'
+ try:
+ os.remove(sockpath)
+ except:
+ pass
+ hparams = int_eap_server_params()
+ hparams['eap_sim_db'] = 'unix:' + sockpath
+ hapd = hostapd.add_ap(apdev[0]['ifname'], hparams)
+
+ # Initial test with hlr_auc_gw socket not available
+ id = dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP WPA-EAP-SHA256",
+ eap="SIM", identity="1232010000000000",
+ password="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82581",
+ scan_freq="2412", wait_connect=False)
+ ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=10)
+ if ev is None:
+ raise Exception("EAP-Failure not reported")
+ dev[0].wait_disconnected()
+ dev[0].request("DISCONNECT")
+
+ # Test with invalid responses and response timeout
+
+ class test_handler(SocketServer.DatagramRequestHandler):
+ def handle(self):
+ data = self.request[0].strip()
+ socket = self.request[1]
+ logger.debug("Received hlr_auc_gw request: " + data)
+ # EAP-SIM DB: Failed to parse response string
+ socket.sendto("FOO", self.client_address)
+ # EAP-SIM DB: Failed to parse response string
+ socket.sendto("FOO 1", self.client_address)
+ # EAP-SIM DB: Unknown external response
+ socket.sendto("FOO 1 2", self.client_address)
+ logger.info("No proper response - wait for pending eap_sim_db request timeout")
+
+ server = SocketServer.UnixDatagramServer(sockpath, test_handler)
+ server.timeout = 1
+
+ dev[0].select_network(id)
+ server.handle_request()
+ ev = dev[0].wait_event(["CTRL-EVENT-EAP-FAILURE"], timeout=10)
+ if ev is None:
+ raise Exception("EAP-Failure not reported")
+ dev[0].wait_disconnected()
+ dev[0].request("DISCONNECT")
+
+ # Test with a valid response
+
+ class test_handler2(SocketServer.DatagramRequestHandler):
+ def handle(self):
+ data = self.request[0].strip()
+ socket = self.request[1]
+ logger.debug("Received hlr_auc_gw request: " + data)
+ fname = os.path.join(params['logdir'],
+ 'hlr_auc_gw.milenage_db')
+ cmd = subprocess.Popen(['../../hostapd/hlr_auc_gw',
+ '-m', fname, data],
+ stdout=subprocess.PIPE)
+ res = cmd.stdout.read().strip()
+ cmd.stdout.close()
+ logger.debug("hlr_auc_gw response: " + res)
+ socket.sendto(res, self.client_address)
+
+ server.RequestHandlerClass = test_handler2
+
+ dev[0].select_network(id)
+ server.handle_request()
+ dev[0].wait_connected()
+ dev[0].request("DISCONNECT")
+ dev[0].wait_disconnected()
+
+def test_eap_tls_sha512(dev, apdev, params):
+ """EAP-TLS with SHA512 signature"""
+ params = int_eap_server_params()
+ params["ca_cert"] = "auth_serv/sha512-ca.pem"
+ params["server_cert"] = "auth_serv/sha512-server.pem"
+ params["private_key"] = "auth_serv/sha512-server.key"
+ hostapd.add_ap(apdev[0]['ifname'], params)
+
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
+ identity="tls user sha512",
+ ca_cert="auth_serv/sha512-ca.pem",
+ client_cert="auth_serv/sha512-user.pem",
+ private_key="auth_serv/sha512-user.key",
+ scan_freq="2412")
+ dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
+ identity="tls user sha512",
+ ca_cert="auth_serv/sha512-ca.pem",
+ client_cert="auth_serv/sha384-user.pem",
+ private_key="auth_serv/sha384-user.key",
+ scan_freq="2412")
+
+def test_eap_tls_sha384(dev, apdev, params):
+ """EAP-TLS with SHA384 signature"""
+ params = int_eap_server_params()
+ params["ca_cert"] = "auth_serv/sha512-ca.pem"
+ params["server_cert"] = "auth_serv/sha384-server.pem"
+ params["private_key"] = "auth_serv/sha384-server.key"
+ hostapd.add_ap(apdev[0]['ifname'], params)
+
+ dev[0].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
+ identity="tls user sha512",
+ ca_cert="auth_serv/sha512-ca.pem",
+ client_cert="auth_serv/sha512-user.pem",
+ private_key="auth_serv/sha512-user.key",
+ scan_freq="2412")
+ dev[1].connect("test-wpa2-eap", key_mgmt="WPA-EAP", eap="TLS",
+ identity="tls user sha512",
+ ca_cert="auth_serv/sha512-ca.pem",
+ client_cert="auth_serv/sha384-user.pem",
+ private_key="auth_serv/sha384-user.key",
+ scan_freq="2412")
projects / thirdparty / hostap.git / blobdiff