#include "utils/common.h"
#include "utils/eloop.h"
#include "common/ieee802_11_defs.h"
+#include "common/hw_features_common.h"
+#include "common/ocv.h"
#include "ap/hostapd.h"
#include "ap/sta_info.h"
#include "ap/ieee802_11.h"
#include "driver_i.h"
#include "mesh_mpm.h"
#include "mesh_rsn.h"
+#include "notify.h"
struct mesh_peer_mgmt_ie {
const u8 *proto_id; /* Mesh Peering Protocol Identifier (2 octets) */
PLINK_UNDEFINED,
OPN_ACPT,
OPN_RJCT,
- OPN_IGNR,
CNF_ACPT,
CNF_RJCT,
- CNF_IGNR,
CLS_ACPT,
- CLS_IGNR
+ REQ_RJCT
};
static const char * const mplstate[] = {
[PLINK_UNDEFINED] = "UNDEFINED",
[OPN_ACPT] = "OPN_ACPT",
[OPN_RJCT] = "OPN_RJCT",
- [OPN_IGNR] = "OPN_IGNR",
[CNF_ACPT] = "CNF_ACPT",
[CNF_RJCT] = "CNF_RJCT",
- [CNF_IGNR] = "CNF_IGNR",
[CLS_ACPT] = "CLS_ACPT",
- [CLS_IGNR] = "CLS_IGNR"
+ [REQ_RJCT] = "REQ_RJCT",
};
do {
if (os_get_random((u8 *) &llid, sizeof(llid)) < 0)
- continue;
+ llid = 0; /* continue */
} while (!llid || llid_in_use(wpa_s, llid));
sta->my_lid = llid;
sta->peer_lid = 0;
+ sta->peer_aid = 0;
/*
* We do not use wpa_mesh_set_plink_state() here because there is no
if (!sta)
return;
- buf_len = 2 + /* capability info */
+ buf_len = 2 + /* Category and Action */
+ 2 + /* capability info */
2 + /* AID */
2 + 8 + /* supported rates */
2 + (32 - 8) +
2 + 32 + /* mesh ID */
2 + 7 + /* mesh config */
- 2 + 23 + /* peering management */
- 2 + 96 + /* AMPE */
+ 2 + 24 + /* peering management */
+ 2 + 96 + 32 + 32 + /* AMPE (96 + max GTKlen + max IGTKlen) */
2 + 16; /* MIC */
#ifdef CONFIG_IEEE80211N
if (type != PLINK_CLOSE && wpa_s->mesh_ht_enabled) {
2 + 5; /* VHT Operation */
}
#endif /* CONFIG_IEEE80211AC */
+#ifdef CONFIG_IEEE80211AX
+ if (type != PLINK_CLOSE && wpa_s->mesh_he_enabled) {
+ buf_len += 3 +
+ HE_MAX_MAC_CAPAB_SIZE +
+ HE_MAX_PHY_CAPAB_SIZE +
+ HE_MAX_MCS_CAPAB_SIZE +
+ HE_MAX_PPET_CAPAB_SIZE;
+ buf_len += 3 + sizeof(struct ieee80211_he_operation);
+ }
+#endif /* CONFIG_IEEE80211AX */
if (type != PLINK_CLOSE)
buf_len += conf->rsn_ie_len; /* RSN IE */
+#ifdef CONFIG_OCV
+ /* OCI is included even when the other STA doesn't support OCV */
+ if (type != PLINK_CLOSE && conf->ocv)
+ buf_len += OCV_OCI_EXTENDED_LEN;
+#endif /* CONFIG_OCV */
buf = wpabuf_alloc(buf_len);
if (!buf)
if (type != PLINK_CLOSE && wpa_s->mesh_vht_enabled) {
u8 vht_capa_oper[2 + 12 + 2 + 5];
- pos = hostapd_eid_vht_capabilities(bss, vht_capa_oper);
+ pos = hostapd_eid_vht_capabilities(bss, vht_capa_oper, 0);
pos = hostapd_eid_vht_operation(bss, pos);
wpabuf_put_data(buf, vht_capa_oper, pos - vht_capa_oper);
}
#endif /* CONFIG_IEEE80211AC */
+#ifdef CONFIG_IEEE80211AX
+ if (type != PLINK_CLOSE && wpa_s->mesh_he_enabled) {
+ u8 he_capa_oper[3 +
+ HE_MAX_MAC_CAPAB_SIZE +
+ HE_MAX_PHY_CAPAB_SIZE +
+ HE_MAX_MCS_CAPAB_SIZE +
+ HE_MAX_PPET_CAPAB_SIZE +
+ 3 + sizeof(struct ieee80211_he_operation)];
+
+ pos = hostapd_eid_he_capab(bss, he_capa_oper,
+ IEEE80211_MODE_MESH);
+ pos = hostapd_eid_he_operation(bss, pos);
+ wpabuf_put_data(buf, he_capa_oper, pos - he_capa_oper);
+ }
+#endif /* CONFIG_IEEE80211AX */
+
+#ifdef CONFIG_OCV
+ if (type != PLINK_CLOSE && conf->ocv) {
+ struct wpa_channel_info ci;
+
+ if (wpa_drv_channel_info(wpa_s, &ci) != 0) {
+ wpa_printf(MSG_WARNING,
+ "Mesh MPM: Failed to get channel info for OCI element");
+ goto fail;
+ }
+
+ pos = wpabuf_put(buf, OCV_OCI_EXTENDED_LEN);
+ if (ocv_insert_extended_oci(&ci, pos) < 0)
+ goto fail;
+ }
+#endif /* CONFIG_OCV */
if (ampe && mesh_rsn_protect_frame(wpa_s->mesh_rsn, sta, cat, buf)) {
wpa_msg(wpa_s, MSG_INFO,
os_memset(¶ms, 0, sizeof(params));
params.addr = sta->addr;
params.plink_state = state;
+ params.peer_aid = sta->peer_aid;
params.set = 1;
ret = wpa_drv_sta_add(wpa_s, ¶ms);
break;
}
reason = WLAN_REASON_MESH_MAX_RETRIES;
- /* fall through on else */
+ /* fall through */
case PLINK_CNF_RCVD:
/* confirm timer */
struct mesh_conf *conf = wpa_s->ifmsh->mconf;
struct hostapd_data *data = wpa_s->ifmsh->bss[0];
struct sta_info *sta;
+#ifdef CONFIG_IEEE80211N
+ struct ieee80211_ht_operation *oper;
+#endif /* CONFIG_IEEE80211N */
int ret;
if (elems->mesh_config_len >= 7 &&
}
sta = ap_get_sta(data, addr);
- if (!sta) {
- sta = ap_sta_add(data, addr);
- if (!sta)
- return NULL;
- }
+ if (sta)
+ return NULL;
+
+ sta = ap_sta_add(data, addr);
+ if (!sta)
+ return NULL;
/* Set WMM by default since Mesh STAs are QoS STAs */
sta->flags |= WLAN_STA_WMM;
#ifdef CONFIG_IEEE80211N
copy_sta_ht_capab(data, sta, elems->ht_capabilities);
+
+ oper = (struct ieee80211_ht_operation *) elems->ht_operation;
+ if (oper &&
+ !(oper->ht_param & HT_INFO_HT_PARAM_STA_CHNL_WIDTH) &&
+ sta->ht_capabilities) {
+ wpa_msg(wpa_s, MSG_DEBUG, MACSTR
+ " does not support 40 MHz bandwidth",
+ MAC2STR(sta->addr));
+ set_disable_ht40(sta->ht_capabilities, 1);
+ }
+
update_ht_state(data, sta);
#endif /* CONFIG_IEEE80211N */
#ifdef CONFIG_IEEE80211AC
copy_sta_vht_capab(data, sta, elems->vht_capabilities);
+ copy_sta_vht_oper(data, sta, elems->vht_operation);
set_sta_vht_opmode(data, sta, elems->vht_opmode_notif);
#endif /* CONFIG_IEEE80211AC */
+#ifdef CONFIG_IEEE80211AX
+ copy_sta_he_capab(data, sta, IEEE80211_MODE_MESH,
+ elems->he_capabilities, elems->he_capabilities_len);
+#endif /* CONFIG_IEEE80211AX */
+
if (hostapd_get_aid(data, sta) < 0) {
wpa_msg(wpa_s, MSG_ERROR, "No AIDs available");
ap_free_sta(data, sta);
params.addr = addr;
params.plink_state = sta->plink_state;
params.aid = sta->aid;
+ params.peer_aid = sta->peer_aid;
params.listen_interval = 100;
params.ht_capabilities = sta->ht_capabilities;
params.vht_capabilities = sta->vht_capabilities;
+ params.he_capab = sta->he_capab;
+ params.he_capab_len = sta->he_capab_len;
params.flags |= WPA_STA_WMM;
params.flags_mask |= WPA_STA_AUTHENTICATED;
if (conf->security == MESH_CONF_SEC_NONE) {
/* Send ctrl event */
wpa_msg(wpa_s, MSG_INFO, MESH_PEER_CONNECTED MACSTR,
MAC2STR(sta->addr));
+
+ /* Send D-Bus event */
+ wpas_notify_mesh_peer_connected(wpa_s, sta->addr);
}
static void mesh_mpm_fsm(struct wpa_supplicant *wpa_s, struct sta_info *sta,
- enum plink_event event)
+ enum plink_event event, u16 reason)
{
struct hostapd_data *hapd = wpa_s->ifmsh->bss[0];
struct mesh_conf *conf = wpa_s->ifmsh->mconf;
- u16 reason = 0;
wpa_msg(wpa_s, MSG_DEBUG, "MPM " MACSTR " state %s event %s",
MAC2STR(sta->addr), mplstate[sta->plink_state],
mesh_mpm_send_plink_action(wpa_s, sta, PLINK_CONFIRM,
0);
break;
+ case REQ_RJCT:
+ mesh_mpm_send_plink_action(wpa_s, sta,
+ PLINK_CLOSE, reason);
+ break;
default:
break;
}
switch (event) {
case OPN_RJCT:
case CNF_RJCT:
- reason = WLAN_REASON_MESH_CONFIG_POLICY_VIOLATION;
+ if (!reason)
+ reason = WLAN_REASON_MESH_CONFIG_POLICY_VIOLATION;
/* fall-through */
case CLS_ACPT:
wpa_mesh_set_plink_state(wpa_s, sta, PLINK_HOLDING);
switch (event) {
case OPN_RJCT:
case CNF_RJCT:
- reason = WLAN_REASON_MESH_CONFIG_POLICY_VIOLATION;
+ if (!reason)
+ reason = WLAN_REASON_MESH_CONFIG_POLICY_VIOLATION;
/* fall-through */
case CLS_ACPT:
wpa_mesh_set_plink_state(wpa_s, sta, PLINK_HOLDING);
switch (event) {
case OPN_RJCT:
case CNF_RJCT:
- reason = WLAN_REASON_MESH_CONFIG_POLICY_VIOLATION;
+ if (!reason)
+ reason = WLAN_REASON_MESH_CONFIG_POLICY_VIOLATION;
/* fall-through */
case CLS_ACPT:
wpa_mesh_set_plink_state(wpa_s, sta, PLINK_HOLDING);
break;
case PLINK_ESTAB:
switch (event) {
+ case OPN_RJCT:
+ case CNF_RJCT:
case CLS_ACPT:
wpa_mesh_set_plink_state(wpa_s, sta, PLINK_HOLDING);
- reason = WLAN_REASON_MESH_CLOSE_RCVD;
+ if (!reason)
+ reason = WLAN_REASON_MESH_CLOSE_RCVD;
eloop_register_timeout(
conf->dot11MeshHoldingTimeout / 1000,
wpa_msg(wpa_s, MSG_INFO, MESH_PEER_DISCONNECTED MACSTR,
MAC2STR(sta->addr));
+ /* Send D-Bus event */
+ wpas_notify_mesh_peer_disconnected(wpa_s, sta->addr,
+ reason);
+
hapd->num_plinks--;
mesh_mpm_send_plink_action(wpa_s, sta,
struct hostapd_data *hapd = wpa_s->ifmsh->bss[0];
struct mesh_conf *mconf = wpa_s->ifmsh->mconf;
struct sta_info *sta;
- u16 plid = 0, llid = 0;
+ u16 plid = 0, llid = 0, aid = 0;
enum plink_event event;
struct ieee802_11_elems elems;
struct mesh_peer_mgmt_ie peer_mgmt_ie;
const u8 *ies;
size_t ie_len;
int ret;
+ u16 reason = 0;
if (mgmt->u.action.category != WLAN_ACTION_SELF_PROTECTED)
return;
ie_len -= 2;
}
if (action_field == PLINK_CONFIRM) {
- wpa_printf(MSG_DEBUG, "MPM: AID 0x%x", WPA_GET_LE16(ies));
+ aid = WPA_GET_LE16(ies);
+ wpa_printf(MSG_DEBUG, "MPM: AID 0x%x", aid);
ies += 2; /* aid */
ie_len -= 2;
}
*/
if (!sta && action_field == PLINK_OPEN &&
(!(mconf->security & MESH_CONF_SEC_AMPE) ||
- wpa_auth_pmksa_get(hapd->wpa_auth, mgmt->sa)))
+ wpa_auth_pmksa_get(hapd->wpa_auth, mgmt->sa, NULL)))
sta = mesh_mpm_add_peer(wpa_s, mgmt->sa, &elems);
if (!sta) {
res);
if (action_field == PLINK_OPEN && res == -2) {
/* AES-SIV decryption failed */
- mesh_mpm_fsm(wpa_s, sta, OPN_RJCT);
+ mesh_mpm_fsm(wpa_s, sta, OPN_RJCT,
+ WLAN_REASON_MESH_INVALID_GTK);
}
return;
}
+
+#ifdef CONFIG_OCV
+ if (action_field == PLINK_OPEN && elems.rsn_ie) {
+ struct wpa_state_machine *sm = sta->wpa_sm;
+ struct wpa_ie_data data;
+
+ res = wpa_parse_wpa_ie_rsn(elems.rsn_ie - 2,
+ elems.rsn_ie_len + 2,
+ &data);
+ if (res) {
+ wpa_printf(MSG_DEBUG,
+ "Failed to parse RSN IE (res=%d)",
+ res);
+ wpa_hexdump(MSG_DEBUG, "RSN IE", elems.rsn_ie,
+ elems.rsn_ie_len);
+ return;
+ }
+
+ wpa_auth_set_ocv(sm, mconf->ocv &&
+ (data.capabilities &
+ WPA_CAPABILITY_OCVC));
+ }
+
+ if (action_field != PLINK_CLOSE &&
+ wpa_auth_uses_ocv(sta->wpa_sm)) {
+ struct wpa_channel_info ci;
+ int tx_chanwidth;
+ int tx_seg1_idx;
+
+ if (wpa_drv_channel_info(wpa_s, &ci) != 0) {
+ wpa_printf(MSG_WARNING,
+ "MPM: Failed to get channel info to validate received OCI in MPM Confirm");
+ return;
+ }
+
+ if (get_tx_parameters(
+ sta, channel_width_to_int(ci.chanwidth),
+ ci.seg1_idx, &tx_chanwidth,
+ &tx_seg1_idx) < 0)
+ return;
+
+ if (ocv_verify_tx_params(elems.oci, elems.oci_len, &ci,
+ tx_chanwidth, tx_seg1_idx) !=
+ 0) {
+ wpa_printf(MSG_WARNING, "MPM: %s",
+ ocv_errorstr);
+ return;
+ }
+ }
+#endif /* CONFIG_OCV */
}
if (sta->plink_state == PLINK_BLOCKED) {
switch (action_field) {
case PLINK_OPEN:
if (plink_free_count(hapd) == 0) {
- event = OPN_IGNR;
+ event = REQ_RJCT;
+ reason = WLAN_REASON_MESH_MAX_PEERS;
wpa_printf(MSG_INFO,
"MPM: Peer link num over quota(%d)",
hapd->max_plinks);
} else if (sta->peer_lid && sta->peer_lid != plid) {
- event = OPN_IGNR;
+ wpa_printf(MSG_DEBUG,
+ "MPM: peer_lid mismatch: 0x%x != 0x%x",
+ sta->peer_lid, plid);
+ return; /* no FSM event */
} else {
sta->peer_lid = plid;
event = OPN_ACPT;
break;
case PLINK_CONFIRM:
if (plink_free_count(hapd) == 0) {
- event = CNF_IGNR;
+ event = REQ_RJCT;
+ reason = WLAN_REASON_MESH_MAX_PEERS;
wpa_printf(MSG_INFO,
"MPM: Peer link num over quota(%d)",
hapd->max_plinks);
} else if (sta->my_lid != llid ||
(sta->peer_lid && sta->peer_lid != plid)) {
- event = CNF_IGNR;
+ wpa_printf(MSG_DEBUG,
+ "MPM: lid mismatch: my_lid: 0x%x != 0x%x or peer_lid: 0x%x != 0x%x",
+ sta->my_lid, llid, sta->peer_lid, plid);
+ return; /* no FSM event */
} else {
if (!sta->peer_lid)
sta->peer_lid = plid;
+ sta->peer_aid = aid;
event = CNF_ACPT;
}
break;
* restarted.
*/
event = CLS_ACPT;
- else if (sta->peer_lid != plid)
- event = CLS_IGNR;
- else if (peer_mgmt_ie.plid && sta->my_lid != llid)
- event = CLS_IGNR;
- else
+ else if (sta->peer_lid != plid) {
+ wpa_printf(MSG_DEBUG,
+ "MPM: peer_lid mismatch: 0x%x != 0x%x",
+ sta->peer_lid, plid);
+ return; /* no FSM event */
+ } else if (peer_mgmt_ie.plid && sta->my_lid != llid) {
+ wpa_printf(MSG_DEBUG,
+ "MPM: my_lid mismatch: 0x%x != 0x%x",
+ sta->my_lid, llid);
+ return; /* no FSM event */
+ } else {
event = CLS_ACPT;
+ }
break;
default:
/*
*/
return;
}
- mesh_mpm_fsm(wpa_s, sta, event);
+ mesh_mpm_fsm(wpa_s, sta, event, reason);
}
projects / thirdparty / hostap.git / blobdiff