/*
* WPA Supplicant - Scanning
- * Copyright (c) 2003-2010, Jouni Malinen <j@w1.fi>
+ * Copyright (c) 2003-2012, Jouni Malinen <j@w1.fi>
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
#include "utils/common.h"
#include "utils/eloop.h"
#include "common/ieee802_11_defs.h"
+#include "common/wpa_ctrl.h"
#include "config.h"
#include "wpa_supplicant_i.h"
#include "driver_i.h"
#include "wps_supplicant.h"
#include "p2p_supplicant.h"
#include "p2p/p2p.h"
+#include "hs20_supplicant.h"
#include "notify.h"
#include "bss.h"
+#include "gas_query.h"
#include "scan.h"
}
#ifdef CONFIG_P2P
- if (!wpa_s->global->p2p_disabled && wpa_s->global->p2p) {
+ if (!wpa_s->global->p2p_disabled && wpa_s->global->p2p &&
+ !wpa_s->conf->p2p_disabled) {
wpa_s->wps->dev.p2p = 1;
if (!wps) {
wps = 1;
#endif /* CONFIG_WPS */
-int wpa_supplicant_enabled_networks(struct wpa_config *conf)
+/**
+ * wpa_supplicant_enabled_networks - Check whether there are enabled networks
+ * @wpa_s: Pointer to wpa_supplicant data
+ * Returns: 0 if no networks are enabled, >0 if networks are enabled
+ *
+ * This function is used to figure out whether any networks (or Interworking
+ * with enabled credentials and auto_interworking) are present in the current
+ * configuration.
+ */
+int wpa_supplicant_enabled_networks(struct wpa_supplicant *wpa_s)
{
- struct wpa_ssid *ssid = conf->ssid;
- int count = 0;
+ struct wpa_ssid *ssid = wpa_s->conf->ssid;
+ int count = 0, disabled = 0;
while (ssid) {
- if (!ssid->disabled)
+ if (!wpas_network_disabled(wpa_s, ssid))
count++;
+ else
+ disabled++;
ssid = ssid->next;
}
+ if (wpa_s->conf->cred && wpa_s->conf->interworking &&
+ wpa_s->conf->auto_interworking)
+ count++;
+ if (count == 0 && disabled > 0) {
+ wpa_dbg(wpa_s, MSG_DEBUG, "No enabled networks (%d disabled "
+ "networks)", disabled);
+ }
return count;
}
struct wpa_ssid *ssid)
{
while (ssid) {
- if (!ssid->disabled)
+ if (!wpas_network_disabled(wpa_s, ssid))
break;
ssid = ssid->next;
}
reslen = int_array_len(*res);
alen = int_array_len(a);
- n = os_realloc(*res, (reslen + alen + 1) * sizeof(int));
+ n = os_realloc_array(*res, reslen + alen + 1, sizeof(int));
if (n == NULL) {
os_free(*res);
*res = NULL;
}
+/**
+ * wpa_supplicant_trigger_scan - Request driver to start a scan
+ * @wpa_s: Pointer to wpa_supplicant data
+ * @params: Scan parameters
+ * Returns: 0 on success, -1 on failure
+ */
int wpa_supplicant_trigger_scan(struct wpa_supplicant *wpa_s,
struct wpa_driver_scan_params *params)
{
wpa_supplicant_notify_scanning(wpa_s, 0);
wpas_notify_scan_done(wpa_s, 0);
} else {
+ os_get_time(&wpa_s->scan_trigger_time);
wpa_s->scan_runs++;
wpa_s->normal_scans++;
}
#endif /* CONFIG_INTERWORKING */
-static struct wpabuf *
-wpa_supplicant_extra_ies(struct wpa_supplicant *wpa_s,
- struct wpa_driver_scan_params *params)
+static struct wpabuf * wpa_supplicant_extra_ies(struct wpa_supplicant *wpa_s)
{
struct wpabuf *extra_ie = NULL;
#ifdef CONFIG_WPS
if (wps) {
struct wpabuf *wps_ie;
- wps_ie = wps_build_probe_req_ie(wps == 2, &wpa_s->wps->dev,
+ wps_ie = wps_build_probe_req_ie(wps == 2 ? DEV_PW_PUSHBUTTON :
+ DEV_PW_DEFAULT,
+ &wpa_s->wps->dev,
wpa_s->wps->uuid, req_type,
0, NULL);
if (wps_ie) {
#endif /* CONFIG_WPS */
+#ifdef CONFIG_HS20
+ if (wpa_s->conf->hs20 && wpabuf_resize(&extra_ie, 7) == 0)
+ wpas_hs20_add_indication(extra_ie);
+#endif /* CONFIG_HS20 */
+
return extra_ie;
}
+#ifdef CONFIG_P2P
+
+/*
+ * Check whether there are any enabled networks or credentials that could be
+ * used for a non-P2P connection.
+ */
+static int non_p2p_network_enabled(struct wpa_supplicant *wpa_s)
+{
+ struct wpa_ssid *ssid;
+
+ for (ssid = wpa_s->conf->ssid; ssid; ssid = ssid->next) {
+ if (wpas_network_disabled(wpa_s, ssid))
+ continue;
+ if (!ssid->p2p_group)
+ return 1;
+ }
+
+ if (wpa_s->conf->cred && wpa_s->conf->interworking &&
+ wpa_s->conf->auto_interworking)
+ return 1;
+
+ return 0;
+}
+
+#endif /* CONFIG_P2P */
+
+
+static struct hostapd_hw_modes * get_mode(struct hostapd_hw_modes *modes,
+ u16 num_modes,
+ enum hostapd_hw_mode mode)
+{
+ u16 i;
+
+ for (i = 0; i < num_modes; i++) {
+ if (modes[i].mode == mode)
+ return &modes[i];
+ }
+
+ return NULL;
+}
+
+
+static void wpa_setband_scan_freqs_list(struct wpa_supplicant *wpa_s,
+ enum hostapd_hw_mode band,
+ struct wpa_driver_scan_params *params)
+{
+ /* Include only supported channels for the specified band */
+ struct hostapd_hw_modes *mode;
+ int count, i;
+
+ mode = get_mode(wpa_s->hw.modes, wpa_s->hw.num_modes, band);
+ if (mode == NULL) {
+ /* No channels supported in this band - use empty list */
+ params->freqs = os_zalloc(sizeof(int));
+ return;
+ }
+
+ params->freqs = os_zalloc((mode->num_channels + 1) * sizeof(int));
+ if (params->freqs == NULL)
+ return;
+ for (count = 0, i = 0; i < mode->num_channels; i++) {
+ if (mode->channels[i].flag & HOSTAPD_CHAN_DISABLED)
+ continue;
+ params->freqs[count++] = mode->channels[i].freq;
+ }
+}
+
+
+static void wpa_setband_scan_freqs(struct wpa_supplicant *wpa_s,
+ struct wpa_driver_scan_params *params)
+{
+ if (wpa_s->hw.modes == NULL)
+ return; /* unknown what channels the driver supports */
+ if (params->freqs)
+ return; /* already using a limited channel set */
+ if (wpa_s->setband == WPA_SETBAND_5G)
+ wpa_setband_scan_freqs_list(wpa_s, HOSTAPD_MODE_IEEE80211A,
+ params);
+ else if (wpa_s->setband == WPA_SETBAND_2G)
+ wpa_setband_scan_freqs_list(wpa_s, HOSTAPD_MODE_IEEE80211G,
+ params);
+}
+
+
static void wpa_supplicant_scan(void *eloop_ctx, void *timeout_ctx)
{
struct wpa_supplicant *wpa_s = eloop_ctx;
struct wpa_ssid *ssid;
- int scan_req = 0, ret;
- struct wpabuf *extra_ie;
+ enum scan_req_type scan_req = NORMAL_SCAN_REQ;
+ int ret;
+ struct wpabuf *extra_ie = NULL;
struct wpa_driver_scan_params params;
+ struct wpa_driver_scan_params *scan_params;
size_t max_ssids;
enum wpa_states prev_state;
if (wpa_s->wpa_state == WPA_INTERFACE_DISABLED) {
wpa_dbg(wpa_s, MSG_DEBUG, "Skip scan - interface disabled");
+ wpas_p2p_continue_after_scan(wpa_s);
return;
}
- if (wpa_s->disconnected && !wpa_s->scan_req) {
+ if (wpa_s->disconnected && wpa_s->scan_req == NORMAL_SCAN_REQ) {
+ wpa_dbg(wpa_s, MSG_DEBUG, "Disconnected - do not scan");
wpa_supplicant_set_state(wpa_s, WPA_DISCONNECTED);
+ wpas_p2p_continue_after_scan(wpa_s);
return;
}
- if (!wpa_supplicant_enabled_networks(wpa_s->conf) &&
- !wpa_s->scan_req) {
+ if (!wpa_supplicant_enabled_networks(wpa_s) &&
+ wpa_s->scan_req == NORMAL_SCAN_REQ) {
wpa_dbg(wpa_s, MSG_DEBUG, "No enabled networks - do not scan");
wpa_supplicant_set_state(wpa_s, WPA_INACTIVE);
+ wpas_p2p_continue_after_scan(wpa_s);
return;
}
}
#ifdef CONFIG_P2P
- if (wpas_p2p_in_progress(wpa_s)) {
- if (wpa_s->wpa_state == WPA_SCANNING) {
+ if (wpas_p2p_in_progress(wpa_s) || wpas_wpa_is_in_progress(wpa_s, 0)) {
+ if (wpa_s->sta_scan_pending &&
+ wpas_p2p_in_progress(wpa_s) == 2 &&
+ wpa_s->global->p2p_cb_on_scan_complete) {
+ wpa_dbg(wpa_s, MSG_DEBUG, "Process pending station "
+ "mode scan during P2P search");
+ } else {
wpa_dbg(wpa_s, MSG_DEBUG, "Delay station mode scan "
"while P2P operation is in progress");
+ wpa_s->sta_scan_pending = 1;
wpa_supplicant_req_scan(wpa_s, 5, 0);
- } else {
- wpa_dbg(wpa_s, MSG_DEBUG, "Do not request scan while "
- "P2P operation is in progress");
+ return;
}
- return;
}
#endif /* CONFIG_P2P */
+#ifdef CONFIG_GAS
+ if (gas_query_in_progress(wpa_s->gas)) {
+ wpa_dbg(wpa_s, MSG_DEBUG, "Delay scan while GAS query is in progress");
+ wpa_supplicant_req_scan(wpa_s, 1, 0);
+ return;
+ }
+#endif /* CONFIG_GAS */
+
if (wpa_s->conf->ap_scan == 2)
max_ssids = 1;
else {
}
scan_req = wpa_s->scan_req;
- wpa_s->scan_req = 0;
+ wpa_s->scan_req = NORMAL_SCAN_REQ;
os_memset(¶ms, 0, sizeof(params));
wpa_s->wpa_state == WPA_INACTIVE)
wpa_supplicant_set_state(wpa_s, WPA_SCANNING);
- if (scan_req != 2 && wpa_s->connect_without_scan) {
+ /*
+ * If autoscan has set its own scanning parameters
+ */
+ if (wpa_s->autoscan_params != NULL) {
+ scan_params = wpa_s->autoscan_params;
+ goto scan;
+ }
+
+ if (scan_req != MANUAL_SCAN_REQ && wpa_s->connect_without_scan) {
for (ssid = wpa_s->conf->ssid; ssid; ssid = ssid->next) {
if (ssid == wpa_s->connect_without_scan)
break;
}
}
+#ifdef CONFIG_P2P
+ if ((wpa_s->p2p_in_provisioning || wpa_s->show_group_started) &&
+ wpa_s->go_params) {
+ wpa_printf(MSG_DEBUG, "P2P: Use specific SSID for scan during P2P group formation (p2p_in_provisioning=%d show_group_started=%d)",
+ wpa_s->p2p_in_provisioning,
+ wpa_s->show_group_started);
+ params.ssids[0].ssid = wpa_s->go_params->ssid;
+ params.ssids[0].ssid_len = wpa_s->go_params->ssid_len;
+ params.num_ssids = 1;
+ goto ssid_list_set;
+ }
+#endif /* CONFIG_P2P */
+
/* Find the starting point from which to continue scanning */
ssid = wpa_s->conf->ssid;
if (wpa_s->prev_scan_ssid != WILDCARD_SSID_SCAN) {
}
}
- if (scan_req != 2 && wpa_s->conf->ap_scan == 2) {
+ if (scan_req != MANUAL_SCAN_REQ && wpa_s->conf->ap_scan == 2) {
wpa_s->connect_without_scan = NULL;
wpa_s->prev_scan_wildcard = 0;
wpa_supplicant_assoc_try(wpa_s, ssid);
if (ssid == NULL && max_ssids > 1)
ssid = wpa_s->conf->ssid;
while (ssid) {
- if (!ssid->disabled && ssid->scan_ssid) {
+ if (!wpas_network_disabled(wpa_s, ssid) &&
+ ssid->scan_ssid) {
wpa_hexdump_ascii(MSG_DEBUG, "Scan SSID",
ssid->ssid, ssid->ssid_len);
params.ssids[params.num_ssids].ssid =
}
for (tssid = wpa_s->conf->ssid; tssid; tssid = tssid->next) {
- if (tssid->disabled)
+ if (wpas_network_disabled(wpa_s, tssid))
continue;
if ((params.freqs || !freqs_set) && tssid->scan_freq) {
int_array_concat(¶ms.freqs,
wpa_dbg(wpa_s, MSG_DEBUG, "Starting AP scan for wildcard "
"SSID");
}
+#ifdef CONFIG_P2P
+ssid_list_set:
+#endif /* CONFIG_P2P */
wpa_supplicant_optimize_freqs(wpa_s, ¶ms);
- extra_ie = wpa_supplicant_extra_ies(wpa_s, ¶ms);
+ extra_ie = wpa_supplicant_extra_ies(wpa_s);
if (params.freqs == NULL && wpa_s->next_scan_freqs) {
wpa_dbg(wpa_s, MSG_DEBUG, "Optimize scan based on previously "
} else
os_free(wpa_s->next_scan_freqs);
wpa_s->next_scan_freqs = NULL;
+ wpa_setband_scan_freqs(wpa_s, ¶ms);
+
+ /* See if user specified frequencies. If so, scan only those. */
+ if (wpa_s->conf->freq_list && !params.freqs) {
+ wpa_dbg(wpa_s, MSG_DEBUG,
+ "Optimize scan based on conf->freq_list");
+ int_array_concat(¶ms.freqs, wpa_s->conf->freq_list);
+ }
+
+ /* Use current associated channel? */
+ if (wpa_s->conf->scan_cur_freq && !params.freqs) {
+ unsigned int num = wpa_s->num_multichan_concurrent;
+
+ params.freqs = os_calloc(num + 1, sizeof(int));
+ if (params.freqs) {
+ num = get_shared_radio_freqs(wpa_s, params.freqs, num);
+ if (num > 0) {
+ wpa_dbg(wpa_s, MSG_DEBUG, "Scan only the "
+ "current operating channels since "
+ "scan_cur_freq is enabled");
+ } else {
+ os_free(params.freqs);
+ params.freqs = NULL;
+ }
+ }
+ }
params.filter_ssids = wpa_supplicant_build_filter_ssids(
wpa_s->conf, ¶ms.num_filter_ssids);
}
#ifdef CONFIG_P2P
- if (wpa_s->p2p_in_provisioning) {
+ if (wpa_s->p2p_in_provisioning ||
+ (wpa_s->show_group_started && wpa_s->go_params)) {
/*
* The interface may not yet be in P2P mode, so we have to
* explicitly request P2P probe to disable CCK rates.
}
#endif /* CONFIG_P2P */
- ret = wpa_supplicant_trigger_scan(wpa_s, ¶ms);
+ scan_params = ¶ms;
+
+scan:
+#ifdef CONFIG_P2P
+ /*
+ * If the driver does not support multi-channel concurrency and a
+ * virtual interface that shares the same radio with the wpa_s interface
+ * is operating there may not be need to scan other channels apart from
+ * the current operating channel on the other virtual interface. Filter
+ * out other channels in case we are trying to find a connection for a
+ * station interface when we are not configured to prefer station
+ * connection and a concurrent operation is already in process.
+ */
+ if (wpa_s->scan_for_connection && scan_req == NORMAL_SCAN_REQ &&
+ !scan_params->freqs && !params.freqs &&
+ wpas_is_p2p_prioritized(wpa_s) &&
+ wpa_s->p2p_group_interface == NOT_P2P_GROUP_INTERFACE &&
+ non_p2p_network_enabled(wpa_s)) {
+ unsigned int num = wpa_s->num_multichan_concurrent;
+
+ params.freqs = os_calloc(num + 1, sizeof(int));
+ if (params.freqs) {
+ num = get_shared_radio_freqs(wpa_s, params.freqs, num);
+ if (num > 0 && num == wpa_s->num_multichan_concurrent) {
+ wpa_dbg(wpa_s, MSG_DEBUG, "Scan only the current operating channels since all channels are already used");
+ } else {
+ os_free(params.freqs);
+ params.freqs = NULL;
+ }
+ }
+ }
+#endif /* CONFIG_P2P */
+
+ ret = wpa_supplicant_trigger_scan(wpa_s, scan_params);
wpabuf_free(extra_ie);
os_free(params.freqs);
wpa_msg(wpa_s, MSG_WARNING, "Failed to initiate AP scan");
if (prev_state != wpa_s->wpa_state)
wpa_supplicant_set_state(wpa_s, prev_state);
+ /* Restore scan_req since we will try to scan again */
+ wpa_s->scan_req = scan_req;
wpa_supplicant_req_scan(wpa_s, 1, 0);
+ } else {
+ wpa_s->scan_for_connection = 0;
}
}
+void wpa_supplicant_update_scan_int(struct wpa_supplicant *wpa_s, int sec)
+{
+ struct os_time remaining, new_int;
+ int cancelled;
+
+ cancelled = eloop_cancel_timeout_one(wpa_supplicant_scan, wpa_s, NULL,
+ &remaining);
+
+ new_int.sec = sec;
+ new_int.usec = 0;
+ if (cancelled && os_time_before(&remaining, &new_int)) {
+ new_int.sec = remaining.sec;
+ new_int.usec = remaining.usec;
+ }
+
+ if (cancelled) {
+ eloop_register_timeout(new_int.sec, new_int.usec,
+ wpa_supplicant_scan, wpa_s, NULL);
+ }
+ wpa_s->scan_interval = sec;
+}
+
+
/**
* wpa_supplicant_req_scan - Schedule a scan for neighboring access points
* @wpa_s: Pointer to wpa_supplicant data
*/
void wpa_supplicant_req_scan(struct wpa_supplicant *wpa_s, int sec, int usec)
{
- /* If there's at least one network that should be specifically scanned
- * then don't cancel the scan and reschedule. Some drivers do
- * background scanning which generates frequent scan results, and that
- * causes the specific SSID scan to get continually pushed back and
- * never happen, which causes hidden APs to never get probe-scanned.
- */
- if (eloop_is_timeout_registered(wpa_supplicant_scan, wpa_s, NULL) &&
- wpa_s->conf->ap_scan == 1) {
- struct wpa_ssid *ssid = wpa_s->conf->ssid;
-
- while (ssid) {
- if (!ssid->disabled && ssid->scan_ssid)
- break;
- ssid = ssid->next;
- }
- if (ssid) {
- wpa_dbg(wpa_s, MSG_DEBUG, "Not rescheduling scan to "
- "ensure that specific SSID scans occur");
- return;
- }
+ if (eloop_deplete_timeout(sec, usec, wpa_supplicant_scan, wpa_s, NULL))
+ {
+ wpa_dbg(wpa_s, MSG_DEBUG, "Rescheduling scan request: %d sec %d usec",
+ sec, usec);
+ return;
}
wpa_dbg(wpa_s, MSG_DEBUG, "Setting scan request: %d sec %d usec",
* @wpa_s: Pointer to wpa_supplicant data
* @sec: Number of seconds after which to scan
* @usec: Number of microseconds after which to scan
+ * Returns: 0 on success or -1 otherwise
*
* This function is used to schedule periodic scans for neighboring
* access points after the specified time.
/**
* wpa_supplicant_req_sched_scan - Start a periodic scheduled scan
* @wpa_s: Pointer to wpa_supplicant data
+ * Returns: 0 is sched_scan was started or -1 otherwise
*
* This function is used to schedule periodic scans for neighboring
* access points repeating the scan continuously.
int wpa_supplicant_req_sched_scan(struct wpa_supplicant *wpa_s)
{
struct wpa_driver_scan_params params;
+ struct wpa_driver_scan_params *scan_params;
enum wpa_states prev_state;
- struct wpa_ssid *ssid;
- struct wpabuf *wps_ie = NULL;
+ struct wpa_ssid *ssid = NULL;
+ struct wpabuf *extra_ie = NULL;
int ret;
unsigned int max_sched_scan_ssids;
int wildcard = 0;
max_sched_scan_ssids = WPAS_MAX_SCAN_SSIDS;
else
max_sched_scan_ssids = wpa_s->max_sched_scan_ssids;
- if (max_sched_scan_ssids < 1)
+ if (max_sched_scan_ssids < 1 || wpa_s->conf->disable_scan_offload)
return -1;
if (wpa_s->sched_scanning) {
need_ssids = 0;
for (ssid = wpa_s->conf->ssid; ssid; ssid = ssid->next) {
- if (!ssid->disabled && !ssid->scan_ssid) {
+ if (!wpas_network_disabled(wpa_s, ssid) && !ssid->scan_ssid) {
/* Use wildcard SSID to find this network */
wildcard = 1;
- } else if (!ssid->disabled && ssid->ssid_len)
+ } else if (!wpas_network_disabled(wpa_s, ssid) &&
+ ssid->ssid_len)
need_ssids++;
+
+#ifdef CONFIG_WPS
+ if (!wpas_network_disabled(wpa_s, ssid) &&
+ ssid->key_mgmt == WPA_KEY_MGMT_WPS) {
+ /*
+ * Normal scan is more reliable and faster for WPS
+ * operations and since these are for short periods of
+ * time, the benefit of trying to use sched_scan would
+ * be limited.
+ */
+ wpa_dbg(wpa_s, MSG_DEBUG, "Use normal scan instead of "
+ "sched_scan for WPS");
+ return -1;
+ }
+#endif /* CONFIG_WPS */
}
if (wildcard)
need_ssids++;
wpa_s->wpa_state == WPA_INACTIVE)
wpa_supplicant_set_state(wpa_s, WPA_SCANNING);
+ if (wpa_s->autoscan_params != NULL) {
+ scan_params = wpa_s->autoscan_params;
+ goto scan;
+ }
+
/* Find the starting point from which to continue scanning */
ssid = wpa_s->conf->ssid;
if (wpa_s->prev_sched_ssid) {
if (!ssid || !wpa_s->prev_sched_ssid) {
wpa_dbg(wpa_s, MSG_DEBUG, "Beginning of SSID list");
-
- wpa_s->sched_scan_interval = 10;
+ if (wpa_s->conf->sched_scan_interval)
+ wpa_s->sched_scan_interval =
+ wpa_s->conf->sched_scan_interval;
+ if (wpa_s->sched_scan_interval == 0)
+ wpa_s->sched_scan_interval = 10;
wpa_s->sched_scan_timeout = max_sched_scan_ssids * 2;
wpa_s->first_sched_scan = 1;
ssid = wpa_s->conf->ssid;
}
while (ssid) {
- if (ssid->disabled)
+ if (wpas_network_disabled(wpa_s, ssid))
goto next;
if (params.num_filter_ssids < wpa_s->max_match_sets &&
params.num_ssids++;
if (params.num_ssids >= max_sched_scan_ssids) {
wpa_s->prev_sched_ssid = ssid;
+ do {
+ ssid = ssid->next;
+ } while (ssid &&
+ (wpas_network_disabled(wpa_s, ssid) ||
+ !ssid->scan_ssid));
break;
}
}
params.filter_ssids = NULL;
}
- if (wpa_s->wps)
- wps_ie = wpa_supplicant_extra_ies(wpa_s, ¶ms);
+ extra_ie = wpa_supplicant_extra_ies(wpa_s);
+ if (extra_ie) {
+ params.extra_ies = wpabuf_head(extra_ie);
+ params.extra_ies_len = wpabuf_len(extra_ie);
+ }
+ scan_params = ¶ms;
+
+scan:
if (ssid || !wpa_s->first_sched_scan) {
- wpa_dbg(wpa_s, MSG_DEBUG,
- "Starting sched scan: interval %d (no timeout)",
- wpa_s->sched_scan_interval);
- } else {
wpa_dbg(wpa_s, MSG_DEBUG,
"Starting sched scan: interval %d timeout %d",
wpa_s->sched_scan_interval, wpa_s->sched_scan_timeout);
+ } else {
+ wpa_dbg(wpa_s, MSG_DEBUG,
+ "Starting sched scan: interval %d (no timeout)",
+ wpa_s->sched_scan_interval);
}
- ret = wpa_supplicant_start_sched_scan(wpa_s, ¶ms,
+ wpa_setband_scan_freqs(wpa_s, scan_params);
+
+ ret = wpa_supplicant_start_sched_scan(wpa_s, scan_params,
wpa_s->sched_scan_interval);
- wpabuf_free(wps_ie);
+ wpabuf_free(extra_ie);
os_free(params.filter_ssids);
if (ret) {
wpa_msg(wpa_s, MSG_WARNING, "Failed to initiate sched scan");
wpa_s->first_sched_scan = 0;
wpa_s->sched_scan_timeout /= 2;
wpa_s->sched_scan_interval *= 2;
+ if (wpa_s->sched_scan_timeout < wpa_s->sched_scan_interval) {
+ wpa_s->sched_scan_interval = 10;
+ wpa_s->sched_scan_timeout = max_sched_scan_ssids * 2;
+ }
}
+ /* If there is no more ssids, start next time from the beginning */
+ if (!ssid)
+ wpa_s->prev_sched_ssid = NULL;
+
return 0;
}
{
wpa_dbg(wpa_s, MSG_DEBUG, "Cancelling scan request");
eloop_cancel_timeout(wpa_supplicant_scan, wpa_s, NULL);
+ wpas_p2p_continue_after_scan(wpa_s);
+}
+
+
+/**
+ * wpa_supplicant_cancel_delayed_sched_scan - Stop a delayed scheduled scan
+ * @wpa_s: Pointer to wpa_supplicant data
+ *
+ * This function is used to stop a delayed scheduled scan.
+ */
+void wpa_supplicant_cancel_delayed_sched_scan(struct wpa_supplicant *wpa_s)
+{
+ if (!wpa_s->sched_scan_supported)
+ return;
+
+ wpa_dbg(wpa_s, MSG_DEBUG, "Cancelling delayed sched scan");
+ eloop_cancel_timeout(wpa_supplicant_delayed_sched_scan_timeout,
+ wpa_s, NULL);
}
}
+/**
+ * wpa_supplicant_notify_scanning - Indicate possible scan state change
+ * @wpa_s: Pointer to wpa_supplicant data
+ * @scanning: Whether scanning is currently in progress
+ *
+ * This function is to generate scanning notifycations. It is called whenever
+ * there may have been a change in scanning (scan started, completed, stopped).
+ * wpas_notify_scanning() is called whenever the scanning state changed from the
+ * previously notified state.
+ */
void wpa_supplicant_notify_scanning(struct wpa_supplicant *wpa_s,
int scanning)
{
}
+/**
+ * wpa_scan_get_ie - Fetch a specified information element from a scan result
+ * @res: Scan result entry
+ * @ie: Information element identitifier (WLAN_EID_*)
+ * Returns: Pointer to the information element (id field) or %NULL if not found
+ *
+ * This function returns the first matching information element in the scan
+ * result.
+ */
const u8 * wpa_scan_get_ie(const struct wpa_scan_res *res, u8 ie)
{
const u8 *end, *pos;
}
+/**
+ * wpa_scan_get_vendor_ie - Fetch vendor information element from a scan result
+ * @res: Scan result entry
+ * @vendor_type: Vendor type (four octets starting the IE payload)
+ * Returns: Pointer to the information element (id field) or %NULL if not found
+ *
+ * This function returns the first matching information element in the scan
+ * result.
+ */
const u8 * wpa_scan_get_vendor_ie(const struct wpa_scan_res *res,
u32 vendor_type)
{
}
-struct wpabuf * wpa_scan_get_vendor_ie_multi(const struct wpa_scan_res *res,
- u32 vendor_type)
+/**
+ * wpa_scan_get_vendor_ie_beacon - Fetch vendor information from a scan result
+ * @res: Scan result entry
+ * @vendor_type: Vendor type (four octets starting the IE payload)
+ * Returns: Pointer to the information element (id field) or %NULL if not found
+ *
+ * This function returns the first matching information element in the scan
+ * result.
+ *
+ * This function is like wpa_scan_get_vendor_ie(), but uses IE buffer only
+ * from Beacon frames instead of either Beacon or Probe Response frames.
+ */
+const u8 * wpa_scan_get_vendor_ie_beacon(const struct wpa_scan_res *res,
+ u32 vendor_type)
{
- struct wpabuf *buf;
const u8 *end, *pos;
- buf = wpabuf_alloc(res->ie_len);
- if (buf == NULL)
+ if (res->beacon_ie_len == 0)
return NULL;
pos = (const u8 *) (res + 1);
- end = pos + res->ie_len;
+ pos += res->ie_len;
+ end = pos + res->beacon_ie_len;
while (pos + 1 < end) {
if (pos + 2 + pos[1] > end)
break;
if (pos[0] == WLAN_EID_VENDOR_SPECIFIC && pos[1] >= 4 &&
vendor_type == WPA_GET_BE32(&pos[2]))
- wpabuf_put_data(buf, pos + 2 + 4, pos[1] - 4);
+ return pos;
pos += 2 + pos[1];
}
- if (wpabuf_len(buf) == 0) {
- wpabuf_free(buf);
- buf = NULL;
- }
-
- return buf;
+ return NULL;
}
-struct wpabuf * wpa_scan_get_vendor_ie_multi_beacon(
- const struct wpa_scan_res *res, u32 vendor_type)
+/**
+ * wpa_scan_get_vendor_ie_multi - Fetch vendor IE data from a scan result
+ * @res: Scan result entry
+ * @vendor_type: Vendor type (four octets starting the IE payload)
+ * Returns: Pointer to the information element payload or %NULL if not found
+ *
+ * This function returns concatenated payload of possibly fragmented vendor
+ * specific information elements in the scan result. The caller is responsible
+ * for freeing the returned buffer.
+ */
+struct wpabuf * wpa_scan_get_vendor_ie_multi(const struct wpa_scan_res *res,
+ u32 vendor_type)
{
struct wpabuf *buf;
const u8 *end, *pos;
- if (res->beacon_ie_len == 0)
- return NULL;
- buf = wpabuf_alloc(res->beacon_ie_len);
+ buf = wpabuf_alloc(res->ie_len);
if (buf == NULL)
return NULL;
pos = (const u8 *) (res + 1);
- pos += res->ie_len;
- end = pos + res->beacon_ie_len;
+ end = pos + res->ie_len;
while (pos + 1 < end) {
if (pos + 2 + pos[1] > end)
for (i = 0; i < scan_res->num; i++) {
struct wpa_scan_res *r = scan_res->res[i];
+ u8 *pos;
if ((r->flags & (WPA_SCAN_LEVEL_DBM | WPA_SCAN_NOISE_INVALID))
== WPA_SCAN_LEVEL_DBM) {
int snr = r->level - r->noise;
wpa_printf(MSG_EXCESSIVE, MACSTR " freq=%d qual=%d "
- "noise=%d level=%d snr=%d%s flags=0x%x",
+ "noise=%d level=%d snr=%d%s flags=0x%x "
+ "age=%u",
MAC2STR(r->bssid), r->freq, r->qual,
r->noise, r->level, snr,
- snr >= GREAT_SNR ? "*" : "", r->flags);
+ snr >= GREAT_SNR ? "*" : "", r->flags,
+ r->age);
} else {
wpa_printf(MSG_EXCESSIVE, MACSTR " freq=%d qual=%d "
- "noise=%d level=%d flags=0x%x",
+ "noise=%d level=%d flags=0x%x age=%u",
MAC2STR(r->bssid), r->freq, r->qual,
- r->noise, r->level, r->flags);
+ r->noise, r->level, r->flags, r->age);
}
+ pos = (u8 *) (r + 1);
+ if (r->ie_len)
+ wpa_hexdump(MSG_EXCESSIVE, "IEs", pos, r->ie_len);
+ pos += r->ie_len;
+ if (r->beacon_ie_len)
+ wpa_hexdump(MSG_EXCESSIVE, "Beacon IEs",
+ pos, r->beacon_ie_len);
}
#endif /* CONFIG_NO_STDOUT_DEBUG */
}
+/**
+ * wpa_supplicant_filter_bssid_match - Is the specified BSSID allowed
+ * @wpa_s: Pointer to wpa_supplicant data
+ * @bssid: BSSID to check
+ * Returns: 0 if the BSSID is filtered or 1 if not
+ *
+ * This function is used to filter out specific BSSIDs from scan reslts mainly
+ * for testing purposes (SET bssid_filter ctrl_iface command).
+ */
+int wpa_supplicant_filter_bssid_match(struct wpa_supplicant *wpa_s,
+ const u8 *bssid)
+{
+ size_t i;
+
+ if (wpa_s->bssid_filter == NULL)
+ return 1;
+
+ for (i = 0; i < wpa_s->bssid_filter_count; i++) {
+ if (os_memcmp(wpa_s->bssid_filter + i * ETH_ALEN, bssid,
+ ETH_ALEN) == 0)
+ return 1;
+ }
+
+ return 0;
+}
+
+
+static void filter_scan_res(struct wpa_supplicant *wpa_s,
+ struct wpa_scan_results *res)
+{
+ size_t i, j;
+
+ if (wpa_s->bssid_filter == NULL)
+ return;
+
+ for (i = 0, j = 0; i < res->num; i++) {
+ if (wpa_supplicant_filter_bssid_match(wpa_s,
+ res->res[i]->bssid)) {
+ res->res[j++] = res->res[i];
+ } else {
+ os_free(res->res[i]);
+ res->res[i] = NULL;
+ }
+ }
+
+ if (res->num != j) {
+ wpa_printf(MSG_DEBUG, "Filtered out %d scan results",
+ (int) (res->num - j));
+ res->num = j;
+ }
+}
+
+
/**
* wpa_supplicant_get_scan_results - Get scan results
* @wpa_s: Pointer to wpa_supplicant data
wpa_dbg(wpa_s, MSG_DEBUG, "Failed to get scan results");
return NULL;
}
+ if (scan_res->fetch_time.sec == 0) {
+ /*
+ * Make sure we have a valid timestamp if the driver wrapper
+ * does not set this.
+ */
+ os_get_time(&scan_res->fetch_time);
+ }
+ filter_scan_res(wpa_s, scan_res);
#ifdef CONFIG_WPS
if (wpas_wps_in_progress(wpa_s)) {
wpa_bss_update_start(wpa_s);
for (i = 0; i < scan_res->num; i++)
- wpa_bss_update_scan_res(wpa_s, scan_res->res[i]);
+ wpa_bss_update_scan_res(wpa_s, scan_res->res[i],
+ &scan_res->fetch_time);
wpa_bss_update_end(wpa_s, info, new_scan);
return scan_res;
}
+/**
+ * wpa_supplicant_update_scan_results - Update scan results from the driver
+ * @wpa_s: Pointer to wpa_supplicant data
+ * Returns: 0 on success, -1 on failure
+ *
+ * This function updates the BSS table within wpa_supplicant based on the
+ * currently available scan results from the driver without requesting a new
+ * scan. This is used in cases where the driver indicates an association
+ * (including roaming within ESS) and wpa_supplicant does not yet have the
+ * needed information to complete the connection (e.g., to perform validation
+ * steps in 4-way handshake).
+ */
int wpa_supplicant_update_scan_results(struct wpa_supplicant *wpa_s)
{
struct wpa_scan_results *scan_res;
return 0;
}
+
+
+/**
+ * scan_only_handler - Reports scan results
+ */
+void scan_only_handler(struct wpa_supplicant *wpa_s,
+ struct wpa_scan_results *scan_res)
+{
+ wpa_dbg(wpa_s, MSG_DEBUG, "Scan-only results received");
+ wpa_msg_ctrl(wpa_s, MSG_INFO, WPA_EVENT_SCAN_RESULTS);
+ wpas_notify_scan_results(wpa_s);
+ wpas_notify_scan_done(wpa_s, 1);
+}
+
+
+int wpas_scan_scheduled(struct wpa_supplicant *wpa_s)
+{
+ return eloop_is_timeout_registered(wpa_supplicant_scan, wpa_s, NULL);
+}