Add support for using random local MAC address

[thirdparty/hostap.git] / wpa_supplicant / wpa_supplicant.conf

diff --git a/wpa_supplicant/wpa_supplicant.conf b/wpa_supplicant/wpa_supplicant.conf
index 2a0dc204fad30958c0a955ca8f4e9c9da6a502fe..f2eaaa8917f2ba3612c4a82347f04024b9833a71 100644 (file)
--- a/wpa_supplicant/wpa_supplicant.conf
+++ b/wpa_supplicant/wpa_supplicant.conf
@@ -332,6 +332,23 @@ fast_reauth=1
 # 1:  Scan current operating frequency if another VIF on the same radio
 #     is already associated.
 
+# MAC address policy default
+# 0 = use permanent MAC address
+# 1 = use random MAC address for each ESS connection
+#
+# By default, permanent MAC address is used unless policy is changed by
+# the per-network mac_addr parameter. Global mac_addr=1 can be used to
+# change this default behavior.
+#mac_addr=0
+
+# Lifetime of random MAC address in seconds (default: 60)
+#rand_addr_lifetime=60
+
+# MAC address policy for pre-association operations (scanning, ANQP)
+# 0 = use permanent MAC address
+# 1 = use random MAC address
+#preassoc_mac_addr=0
+
 # Interworking (IEEE 802.11u)
 
 # Enable Interworking
@@ -962,6 +979,11 @@ fast_reauth=1
 # Beacon interval (default: 100 TU)
 #beacon_int=100
 
+# MAC address policy
+# 0 = use permanent MAC address
+# 1 = use random MAC address for each ESS connection
+#mac_addr=0
+
 # disable_ht: Whether HT (802.11n) should be disabled.
 # 0 = HT enabled (if AP supports it)
 # 1 = HT disabled