X-Git-Url: http://git.ipfire.org/?a=blobdiff_plain;ds=sidebyside;f=cmd%2FKconfig;h=c80ac364ead6929c1f7aa6216d63fc5cd290bc65;hb=10e40d54b38b9b1916c35fc5c4ed2eff4b4bf117;hp=586a6456e4f3597e74fef347e3ffbb1841d62abe;hpb=bfb380b30ad2d678c09037560abb6f09a5e9c9b6;p=people%2Fms%2Fu-boot.git diff --git a/cmd/Kconfig b/cmd/Kconfig index 586a6456e4..c80ac364ea 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -126,6 +126,18 @@ config CMD_BDI help Print board info +config CMD_CONFIG + bool "config" + select BUILD_BIN2C + default SANDBOX + help + Print ".config" contents. + + If this option is enabled, the ".config" file contents are embedded + in the U-Boot image and can be printed on the console by the "config" + command. This provides information of which options are enabled on + the running U-Boot. + config CMD_CONSOLE bool "coninfo" default y @@ -142,6 +154,7 @@ config CMD_CPU config CMD_LICENSE bool "license" + select BUILD_BIN2C help Print GPL license text @@ -253,7 +266,9 @@ config CMD_XIMG Extract a part of a multi-image. config CMD_POWEROFF - bool + bool "poweroff" + help + Poweroff/Shutdown the system endmenu @@ -301,6 +316,22 @@ config CMD_ENV_EXISTS Check if a variable is defined in the environment for use in shell scripting. +config CMD_ENV_CALLBACK + bool "env callbacks - print callbacks and their associated variables" + help + Some environment variable have callbacks defined by + U_BOOT_ENV_CALLBACK. These are called when the variable changes. + For example changing "baudrate" adjust the serial baud rate. This + command lists the currently defined callbacks. + +config CMD_ENV_FLAGS + bool "env flags -print variables that have non-default flags" + help + Some environment variables have special flags that control their + behaviour. For example, serial# can only be written once and cannot + be deleted. This command shows the variables that have special + flags. + endmenu menu "Memory commands" @@ -309,7 +340,7 @@ config CMD_MEMORY bool "md, mm, nm, mw, cp, cmp, base, loop" default y help - Memeory commands. + Memory commands. md - memory display mm - memory modify (auto-incrementing address) nm - memory modify (constant address) @@ -317,14 +348,95 @@ config CMD_MEMORY cp - memory copy cmp - memory compare base - print or set address offset - loop - initinite loop on address range + loop - initialize loop on address range config CMD_CRC32 bool "crc32" + select HASH default y help Compute CRC32. +config CRC32_VERIFY + bool "crc32 -v" + depends on CMD_CRC32 + help + Add -v option to verify data against a crc32 checksum. + +config CMD_EEPROM + bool "eeprom - EEPROM subsystem" + help + (deprecated, needs conversion to driver model) + Provides commands to read and write EEPROM (Electrically Erasable + Programmable Read Only Memory) chips that are connected over an + I2C bus. + +config CMD_EEPROM_LAYOUT + bool "Enable layout-aware eeprom commands" + depends on CMD_EEPROM + help + (deprecated, needs conversion to driver model) + When enabled, additional eeprom sub-commands become available. + + eeprom print - prints the contents of the eeprom in a human-readable + way (eeprom layout fields, and data formatted to be fit for human + consumption). + + eeprom update - allows user to update eeprom fields by specifying + the field name, and providing the new data in a human readable format + (same format as displayed by the eeprom print command). + + Both commands can either auto detect the layout, or be told which + layout to use. + + Feature API: + __weak int parse_layout_version(char *str) + - override to provide your own layout name parsing + __weak void __eeprom_layout_assign(struct eeprom_layout *layout, + int layout_version); + - override to setup the layout metadata based on the version + __weak int eeprom_layout_detect(unsigned char *data) + - override to provide your own algorithm for detecting layout + version + eeprom_field.c + - contains various printing and updating functions for common + types of eeprom fields. Can be used for defining + custom layouts. + +config EEPROM_LAYOUT_HELP_STRING + string "Tells user what layout names are supported" + depends on CMD_EEPROM_LAYOUT + default "" + help + Help printed with the LAYOUT VERSIONS part of the 'eeprom' + command's help. + +config CMD_MD5SUM + bool "md5sum" + default n + select MD5 + help + Compute MD5 checksum. + +config MD5SUM_VERIFY + bool "md5sum -v" + default n + depends on CMD_MD5SUM + help + Add -v option to verify data against an MD5 checksum. + +config CMD_SHA1SUM + bool "sha1sum" + select SHA1 + help + Compute SHA1 checksum. + +config SHA1SUM_VERIFY + bool "sha1sum -v" + depends on CMD_SHA1SUM + help + Add -v option to verify data against a SHA1 checksum. + config LOOPW bool "loopw" help @@ -348,8 +460,38 @@ config CMD_MEMINFO endmenu +menu "Compression commands" + +config CMD_LZMADEC + bool "lzmadec" + select LZMA + help + Support decompressing an LZMA (Lempel-Ziv-Markov chain algorithm) + image from memory. + +config CMD_UNZIP + bool "unzip" + help + Uncompress a zip-compressed memory region. + +config CMD_ZIP + bool "zip" + help + Compress a memory region with zlib deflate method. + +endmenu + menu "Device access commands" +config CMD_CLK + bool "clk - Show clock frequencies" + help + (deprecated) + Shows clock frequences by calling a sock_clk_dump() hook function. + This is depreated in favour of using the CLK uclass and accessing + clock values from associated drivers. However currently no command + exists for this. + config CMD_DM bool "dm - Access to driver model information" depends on DM @@ -373,6 +515,57 @@ config CMD_DEMO option is to use sandbox and pass the -d point to sandbox's u-boot.dtb file. +config CMD_IDE + bool "ide - Support for IDE drivers" + select IDE + help + Provides an 'ide' command which allows accessing the IDE drive, + reseting the IDE interface, printing the partition table and + geting device info. It also enables the 'diskboot' command which + permits booting from an IDE drive. + +config CMD_IO + bool "io - Support for performing I/O accesses" + help + Provides an 'iod' command to display I/O space and an 'iow' command + to write values to the I/O space. This can be useful for manually + checking the state of devices during boot when debugging device + drivers, etc. + +config CMD_IOTRACE + bool "iotrace - Support for tracing I/O activity" + help + Provides an 'iotrace' command which supports recording I/O reads and + writes in a trace buffer in memory . It also maintains a checksum + of the trace records (even if space is exhausted) so that the + sequence of I/O accesses can be verified. + + When debugging drivers it is useful to see what I/O accesses were + done and in what order. + + Even if the individual accesses are of little interest it can be + useful to verify that the access pattern is consistent each time + an operation is performed. In this case a checksum can be used to + characterise the operation of a driver. The checksum can be compared + across different runs of the operation to verify that the driver is + working properly. + + In particular, when performing major refactoring of the driver, where + the access pattern should not change, the checksum provides assurance + that the refactoring work has not broken the driver. + + This works by sneaking into the io.h heder for an architecture and + redirecting I/O accesses through iotrace's tracing mechanism. + + For now no commands are provided to examine the trace buffer. The + format is fairly simple, so 'md' is a reasonable substitute. + + Note: The checksum feature is only useful for I/O regions where the + contents do not change outside of software control. Where this is not + suitable you can fall back to manually comparing the addresses. It + might be useful to enhance tracing to only checksum the accesses and + not the data read/written. + config CMD_LOADB bool "loadb" default y @@ -394,6 +587,14 @@ config CMD_FLASH erase - FLASH memory protect - enable or disable FLASH write protection +config CMD_GPT + bool "GPT (GUID Partition Table) command" + select PARTITION_UUIDS + select EFI_PARTITION + help + Enable the 'gpt' command to ready and write GPT style partition + tables. + config CMD_ARMFLASH #depends on FLASH_CFI_DRIVER bool "armflash" @@ -407,9 +608,36 @@ config CMD_MMC config CMD_NAND bool "nand" + default y if NAND_SUNXI help NAND support. +if CMD_NAND +config CMD_NAND_TRIMFFS + bool "nand write.trimffs" + default y if ARCH_SUNXI + help + Allows one to skip empty pages when flashing something on a NAND. + +config CMD_NAND_LOCK_UNLOCK + bool "nand lock/unlock" + help + NAND locking support. + +config CMD_NAND_TORTURE + bool "nand torture" + help + NAND torture support. + +endif # CMD_NAND + +config CMD_PART + bool "part" + select PARTITION_UUIDS + help + Read and display information about the partition table on + various media. + config CMD_SF bool "sf" help @@ -448,6 +676,48 @@ config CMD_FPGA help FPGA support. +config CMD_FPGA_LOADBP + bool "fpga loadbp - load partial bitstream (Xilinx only)" + depends on CMD_FPGA + help + Supports loading an FPGA device from a bitstream buffer containing + a partial bitstream. + +config CMD_FPGA_LOADFS + bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)" + depends on CMD_FPGA + help + Supports loading an FPGA device from a FAT filesystem. + +config CMD_FPGA_LOADMK + bool "fpga loadmk - load bitstream from image" + depends on CMD_FPGA + help + Supports loading an FPGA device from a image generated by mkimage. + +config CMD_FPGA_LOADP + bool "fpga loadp - load partial bitstream" + depends on CMD_FPGA + help + Supports loading an FPGA device from a bitstream buffer containing + a partial bitstream. + +config CMD_FPGAD + bool "fpgad - dump FPGA registers" + help + (legacy, needs conversion to driver model) + Provides a way to dump FPGA registers by calling the board-specific + fpga_get_reg() function. This functions similarly to the 'md' + command. + +config CMD_FUSE + bool "fuse - support for the fuse subssystem" + help + (deprecated - needs conversion to driver model) + This allows reading, sensing, programming or overriding fuses + which control the behaviour of the device. The command uses the + fuse_...() API. + config CMD_REMOTEPROC bool "remoteproc" depends on REMOTEPROC @@ -459,6 +729,24 @@ config CMD_GPIO help GPIO support. +config CMD_FDC + bool "fdcboot - Boot from floppy device" + help + The 'fdtboot' command allows booting an image from a floppy disk. + +config CMD_SATA + bool "sata - Access SATA subsystem" + select SATA + help + SATA (Serial Advanced Technology Attachment) is a serial bus + standard for connecting to hard drives and other storage devices. + This command provides information about attached devices and allows + reading, writing and other operations. + + SATA replaces PATA (originally just ATA), which stands for Parallel AT + Attachment, where AT refers to an IBM AT (Advanced Technology) + computer released in 1984. + endmenu @@ -566,23 +854,39 @@ config CMD_LINK_LOCAL help Acquire a network IP address using the link-local protocol +config CMD_ETHSW + bool "ethsw" + help + Allow control of L2 Ethernet switch commands. These are supported + by the vsc9953 Ethernet driver at present. Sub-commands allow + operations such as enabling / disabling a port and + viewing/maintaining the filtering database (FDB) + endmenu menu "Misc commands" -config CMD_AMBAPP - bool "ambapp" - depends on LEON3 - default y +config CMD_BMP + bool "Enable 'bmp' command" + depends on LCD || DM_VIDEO || VIDEO help - Lists AMBA Plug-n-Play information. + This provides a way to obtain information about a BMP-format iamge + and to display it. BMP (which presumably stands for BitMaP) is a + file format defined by Microsoft which supports images of various + depths, formats and compression methods. Headers on the file + determine the formats used. This command can be used by first loading + the image into RAM, then using this command to look at it or display + it. -config SYS_AMBAPP_PRINT_ON_STARTUP - bool "Show AMBA PnP info on startup" - depends on CMD_AMBAPP - default n +config CMD_BSP + bool "Enable board-specific commands" help - Show AMBA Plug-n-Play information on startup. + (deprecated: instead, please define a Kconfig option for each command) + + Some boards have board-specific commands which are only enabled + during developemnt and need to be turned off for production. This + option provides a way to control this. The commands that are enabled + vary depending on the board. config CMD_BKOPS_ENABLE bool "mmc bkops enable" @@ -609,11 +913,43 @@ config CMD_CACHE help Enable the "icache" and "dcache" commands +config CMD_DISPLAY + bool "Enable the 'display' command, for character displays" + help + (this needs porting to driver model) + This enables the 'display' command which allows a string to be + displayed on a simple board-specific display. Implement + display_putc() to use it. + +config CMD_LED + bool "led" + default y if LED + help + Enable the 'led' command which allows for control of LEDs supported + by the board. The LEDs can be listed with 'led list' and controlled + with led on/off/togle/blink. Any LED drivers can be controlled with + this command, e.g. led_gpio. + +config CMD_DATE + bool "date" + default y if DM_RTC + help + Enable the 'date' command for getting/setting the time/date in RTC + devices. + config CMD_TIME bool "time" help Run commands and summarize execution time. +config CMD_GETTIME + bool "gettime - read elapsed time" + help + Enable the 'gettime' command which reads the elapsed time since + U-Boot started running. This shows the time in seconds and + milliseconds. See also the 'bootstage' command which provides more + flexibility for boot timing. + # TODO: rename to CMD_SLEEP config CMD_MISC bool "sleep" @@ -626,16 +962,6 @@ config CMD_TIMER help Access the system timer. -config CMD_SETGETDCR - bool "getdcr, setdcr, getidcr, setidcr" - depends on 4xx - default y - help - getdcr - Get an AMCC PPC 4xx DCR's value - setdcr - Set an AMCC PPC 4xx DCR's value - getidcr - Get a register value via indirect DCR addressing - setidcr - Set a register value via indirect DCR addressing - config CMD_SOUND bool "sound" depends on SOUND @@ -653,6 +979,9 @@ config CMD_QFW This provides access to the QEMU firmware interface. The main feature is to allow easy loading of files passed to qemu-system via -kernel / -initrd + +source "cmd/mvebu/Kconfig" + endmenu config CMD_BOOTSTAGE @@ -699,6 +1028,75 @@ config CMD_REGULATOR endmenu menu "Security commands" +config CMD_AES + bool "Enable the 'aes' command" + select AES + help + This provides a means to encrypt and decrypt data using the AES + (Advanced Encryption Standard). This algorithm uses a symetric key + and is widely used as a streaming cipher. Different key lengths are + supported by the algorithm but this command only supports 128 bits + at present. + +config CMD_BLOB + bool "Enable the 'blob' command" + help + This is used with the Freescale secure boot mechanism. + + Freescale's SEC block has built-in Blob Protocol which provides + a method for protecting user-defined data across system power + cycles. SEC block protects data in a data structure called a Blob, + which provides both confidentiality and integrity protection. + + Encapsulating data as a blob + Each time that the Blob Protocol is used to protect data, a + different randomly generated key is used to encrypt the data. + This random key is itself encrypted using a key which is derived + from SoC's non-volatile secret key and a 16 bit Key identifier. + The resulting encrypted key along with encrypted data is called a + blob. The non-volatile secure key is available for use only during + secure boot. + + During decapsulation, the reverse process is performed to get back + the original data. + + Sub-commands: + blob enc - encapsulating data as a cryptgraphic blob + blob dec - decapsulating cryptgraphic blob to get the data + + Syntax: + + blob enc src dst len km + + Encapsulate and create blob of data $len bytes long + at address $src and store the result at address $dst. + $km is the 16 byte key modifier is also required for + generation/use as key for cryptographic operation. Key + modifier should be 16 byte long. + + blob dec src dst len km + + Decapsulate the blob of data at address $src and + store result of $len byte at addr $dst. + $km is the 16 byte key modifier is also required for + generation/use as key for cryptographic operation. Key + modifier should be 16 byte long. + +config CMD_HASH + bool "Support 'hash' command" + select HASH + help + This provides a way to hash data in memory using various supported + algorithms (such as SHA1, MD5, CRC32). The computed digest can be + saved to memory or to an environment variable. It is also possible + to verify a hash against data in memory. + +config HASH_VERIFY + bool "hash -v" + depends on CMD_HASH + help + Add -v option to verify data against a hash. + config CMD_TPM bool "Enable the 'tpm' command" depends on TPM @@ -734,6 +1132,27 @@ config CMD_CROS_EC endmenu menu "Filesystem commands" +config CMD_CBFS + bool "Enable the 'cbfs' command" + depends on FS_CBFS + help + Define this to enable support for reading from a Coreboot + filesystem. This is a ROM-based filesystem used for accessing files + on systems that use coreboot as the first boot-loader and then load + U-Boot to actually boot the Operating System. Available commands are + cbfsinit, cbfsinfo, cbfsls and cbfsload. + +config CMD_CRAMFS + bool "Enable the 'cramfs' command" + depends on FS_CRAMFS + help + This provides commands for dealing with CRAMFS (Compressed ROM + filesystem). CRAMFS is useful when space is tight since files are + compressed. Two commands are provided: + + cramfsls - lists files in a cramfs image + cramfsload - loads a file from a cramfs image + config CMD_EXT2 bool "ext2 command support" help @@ -752,6 +1171,7 @@ config CMD_EXT4_WRITE config CMD_FAT bool "FAT command support" + select FS_FAT help Support for the FAT fs @@ -760,12 +1180,83 @@ config CMD_FS_GENERIC help Enables filesystem commands (e.g. load, ls) that work for multiple fs types. + +config CMD_FS_UUID + bool "fsuuid command" + help + Enables fsuuid command for filesystem UUID. + +config CMD_JFFS2 + bool "jffs2 command" + select FS_JFFS2 + help + Enables commands to support the JFFS2 (Journalling Flash File System + version 2) filesystem. This enables fsload, ls and fsinfo which + provide the ability to load files, list directories and obtain + filesystem information. + +config CMD_MTDPARTS + depends on ARCH_SUNXI + bool "MTD partition support" + help + MTD partition support + +config MTDIDS_DEFAULT + string "Default MTD IDs" + depends on CMD_MTDPARTS + help + Defines a default MTD ID + +config MTDPARTS_DEFAULT + string "Default MTD partition scheme" + depends on CMD_MTDPARTS + help + Defines a default MTD partitioning scheme in the Linux MTD command + line partitions format + +endmenu + +menu "Debug commands" + +config CMD_BEDBUG + bool "bedbug" + help + The bedbug (emBEDded deBUGger) command provides debugging features + for some PowerPC processors. For details please see the + docuemntation in doc/README.beddbug + +config CMD_DIAG + bool "diag - Board diagnostics" + help + This command provides access to board diagnostic tests. These are + called Power-on Self Tests (POST). The command allows listing of + available tests and running either all the tests, or specific tests + identified by name. + +config CMD_IRQ + bool "irq - Show information about interrupts" + depends on !ARM && !MIPS && !SH + help + This enables two commands: + + interrupts - enable or disable interrupts + irqinfo - print device-specific interrupt information + +config CMD_KGDB + bool "kgdb - Allow debugging of U-Boot with gdb" + help + This enables a 'kgdb' command which allows gdb to connect to U-Boot + over a serial link for debugging purposes. This allows + single-stepping, inspecting variables, etc. This is supported only + on PowerPC at present. + endmenu config CMD_UBI tristate "Enable UBI - Unsorted block images commands" select CRC32 select MTD_UBI + default y if NAND_SUNXI help UBI is a software layer above MTD layer which admits use of LVM-like logical volumes on top of MTD devices, hides some complexities of @@ -774,4 +1265,14 @@ config CMD_UBI (www.linux-mtd.infradead.org). Activate this option if you want to use U-Boot UBI commands. +config CMD_UBIFS + tristate "Enable UBIFS - Unsorted block images filesystem commands" + depends on CMD_UBI + select CRC32 + select RBTREE if ARCH_SUNXI + select LZO if ARCH_SUNXI + default y if NAND_SUNXI + help + UBIFS is a file system for flash devices which works on top of UBI. + endmenu