X-Git-Url: http://git.ipfire.org/?a=blobdiff_plain;f=Kconfig;h=bb80adacf45f00c4ee525e5239edf376a141b0e6;hb=d63b5b4fbb401e2ffbce5083c7f3d9f8045651ba;hp=15e15af5b3c59510614b9e6cef03bdd1968a49ed;hpb=4d80051b63ff54f6b6f90fceb92cf87ab3401ecb;p=people%2Fms%2Fu-boot.git diff --git a/Kconfig b/Kconfig index 15e15af5b3..bb80adacf4 100644 --- a/Kconfig +++ b/Kconfig @@ -1,6 +1,7 @@ # # For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. +# see the file Documentation/kbuild/kconfig-language.txt in the +# Linux kernel source tree. # mainmenu "U-Boot $UBOOTVERSION Configuration" @@ -17,7 +18,7 @@ config LOCALVERSION string "Local version - append to U-Boot release" help Append an extra string to the end of your U-Boot version. - This will show up on your boot log, for example. + This will show up in your boot log, for example. The string you set here will be appended after the contents of any files with a filename matching localversion* in your object and source tree, in that order. Your total string can @@ -28,11 +29,11 @@ config LOCALVERSION_AUTO default y help This will try to automatically determine if the current tree is a - release tree by looking for git tags that belong to the current + release tree by looking for Git tags that belong to the current top of tree revision. A string of the format -gxxxxxxxx will be added to the localversion - if a git-based tree is found. The string generated by this will be + if a Git-based tree is found. The string generated by this will be appended after any matching localversion* files, and after the value set in CONFIG_LOCALVERSION. @@ -52,11 +53,34 @@ config CC_OPTIMIZE_FOR_SIZE This option is enabled by default for U-Boot. +config DISTRO_DEFAULTS + bool "Select defaults suitable for booting general purpose Linux distributions" + default y if ARCH_SUNXI || TEGRA + default y if ARCH_LS2080A + default y if ARCH_MESON + default y if ARCH_ROCKCHIP + default n + select CMD_BOOTZ if ARM && !ARM64 + select CMD_BOOTI if ARM64 + select CMD_DHCP + select CMD_PXE + select CMD_EXT2 + select CMD_EXT4 + select CMD_FAT + select CMD_FS_GENERIC + select CMD_MII + select CMD_PING + select CMD_PART + select HUSH_PARSER + help + Select this to enable various options and commands which are suitable + for building u-boot for booting general purpose Linux distributions. + config SYS_MALLOC_F bool "Enable malloc() pool before relocation" default y if DM help - Before relocation memory is very limited on many platforms. Still, + Before relocation, memory is very limited on many platforms. Still, we can provide a small malloc() pool if needed. Driver model in particular needs this to operate, so that it can allocate the initial serial device and any others that are needed. @@ -66,7 +90,7 @@ config SYS_MALLOC_F_LEN depends on SYS_MALLOC_F default 0x400 help - Before relocation memory is very limited on many platforms. Still, + Before relocation, memory is very limited on many platforms. Still, we can provide a small malloc() pool if needed. Driver model in particular needs this to operate, so that it can allocate the initial serial device and any others that are needed. @@ -78,7 +102,7 @@ menuconfig EXPERT This option allows certain base U-Boot options and settings to be disabled or tweaked. This is for specialized environments which can tolerate a "non-standard" U-Boot. - Only use this if you really know what you are doing. + Use this only if you really know what you are doing. if EXPERT config SYS_MALLOC_CLEAR_ON_INIT @@ -95,74 +119,195 @@ if EXPERT Then the boot time can be significantly reduced. Warning: When disabling this, please check if malloc calls, maybe - should be replaced by calloc - if expects zeroed memory. -endif -endmenu # General setup - -menu "Boot images" - -config SUPPORT_SPL - bool + should be replaced by calloc - if one expects zeroed memory. -config SUPPORT_TPL - bool - -config SPL - bool - depends on SUPPORT_SPL - prompt "Enable SPL" +config TOOLS_DEBUG + bool "Enable debug information for tools" help - If you want to build SPL as well as the normal image, say Y. + Enable generation of debug information for tools such as mkimage. + This can be used for debugging purposes. With debug information + it is possible to set breakpoints on particular lines, single-step + debug through the source code, etc. -config SPL_STACK_R - depends on SPL - bool "Enable SDRAM location for SPL stack" - help - SPL starts off execution in SRAM and thus typically has only a small - stack available. Since SPL sets up DRAM while in its board_init_f() - function, it is possible for the stack to move there before - board_init_r() is reached. This option enables a special SDRAM - location for the SPL stack. U-Boot SPL switches to this after - board_init_f() completes, and before board_init_r() starts. +endif # EXPERT -config SPL_STACK_R_ADDR - depends on SPL_STACK_R - hex "SDRAM location for SPL stack" +config PHYS_64BIT + bool "64bit physical address support" help - Specify the address in SDRAM for the SPL stack. This will be set up - before board_init_r() is called. + Say Y here to support 64bit physical memory address. + This can be used not only for 64bit SoCs, but also for + large physical address extention on 32bit SoCs. -config TPL - bool - depends on SPL && SUPPORT_TPL - prompt "Enable TPL" - help - If you want to build TPL as well as the normal image and SPL, say Y. +endmenu # General setup + +menu "Boot images" config FIT bool "Support Flattened Image Tree" + select MD5 + select SHA1 help - This option allows to boot the new uImage structrure, + This option allows you to boot the new uImage structure, Flattened Image Tree. FIT is formally a FDT, which can include images of various types (kernel, FDT blob, ramdisk, etc.) in a single blob. To boot this new uImage structure, - pass the the address of the blob to the "bootm" command. + pass the address of the blob to the "bootm" command. + FIT is very flexible, supporting compression, multiple images, + multiple configurations, verification through hashing and also + verified boot (secure boot using RSA). -config FIT_VERBOSE - bool "Display verbose messages on FIT boot" - depends on FIT +if FIT + +config FIT_ENABLE_SHA256_SUPPORT + bool "Support SHA256 checksum of FIT image contents" + select SHA256 + default y + help + Enable this to support SHA256 checksum of FIT image contents. A + SHA256 checksum is a 256-bit (32-byte) hash value used to check that + the image contents have not been corrupted. SHA256 is recommended + for use in secure applications since (as at 2016) there is no known + feasible attack that could produce a 'collision' with differing + input data. Use this for the highest security. Note that only the + SHA256 variant is supported: SHA512 and others are not currently + supported in U-Boot. config FIT_SIGNATURE bool "Enable signature verification of FIT uImages" - depends on FIT depends on DM select RSA help This option enables signature verification of FIT uImages, using a hash signed and verified using RSA. If CONFIG_SHA_PROG_HW_ACCEL is defined, i.e support for progressive - hashing is available using hardware, RSA library will use it. - See doc/uImage.FIT/signature.txt for more details. + hashing is available using hardware, then the RSA library will use + it. See doc/uImage.FIT/signature.txt for more details. + + WARNING: When relying on signed FIT images with a required signature + check the legacy image format is disabled by default, so that + unsigned images cannot be loaded. If a board needs the legacy image + format support in this case, enable it using + CONFIG_IMAGE_FORMAT_LEGACY. + +config FIT_VERBOSE + bool "Show verbose messages when FIT images fail" + help + Generally a system will have valid FIT images so debug messages + are a waste of code space. If you are debugging your images then + you can enable this option to get more verbose information about + failures. + +config FIT_BEST_MATCH + bool "Select the best match for the kernel device tree" + help + When no configuration is explicitly selected, default to the + one whose fdt's compatibility field best matches that of + U-Boot itself. A match is considered "best" if it matches the + most specific compatibility entry of U-Boot's fdt's root node. + The order of entries in the configuration's fdt is ignored. + +config FIT_IMAGE_POST_PROCESS + bool "Enable post-processing of FIT artifacts after loading by U-Boot" + depends on TI_SECURE_DEVICE + help + Allows doing any sort of manipulation to blobs after they got extracted + from FIT images like stripping off headers or modifying the size of the + blob, verification, authentication, decryption etc. in a platform or + board specific way. In order to use this feature a platform or board- + specific implementation of board_fit_image_post_process() must be + provided. Also, anything done during this post-processing step would + need to be comprehended in how the images were prepared before being + injected into the FIT creation (i.e. the blobs would have been pre- + processed before being added to the FIT image). + +if SPL + +config SPL_FIT + bool "Support Flattened Image Tree within SPL" + depends on SPL + select SPL_OF_LIBFDT + +config SPL_FIT_SIGNATURE + bool "Enable signature verification of FIT firmware within SPL" + depends on SPL_DM + select SPL_FIT + select SPL_RSA + +config SPL_LOAD_FIT + bool "Enable SPL loading U-Boot as a FIT" + select SPL_FIT + help + Normally with the SPL framework a legacy image is generated as part + of the build. This contains U-Boot along with information as to + where it should be loaded. This option instead enables generation + of a FIT (Flat Image Tree) which provides more flexibility. In + particular it can handle selecting from multiple device tree + and passing the correct one to U-Boot. + +config SPL_FIT_IMAGE_POST_PROCESS + bool "Enable post-processing of FIT artifacts after loading by the SPL" + depends on SPL_LOAD_FIT && TI_SECURE_DEVICE + help + Allows doing any sort of manipulation to blobs after they got extracted + from the U-Boot FIT image like stripping off headers or modifying the + size of the blob, verification, authentication, decryption etc. in a + platform or board specific way. In order to use this feature a platform + or board-specific implementation of board_fit_image_post_process() must + be provided. Also, anything done during this post-processing step would + need to be comprehended in how the images were prepared before being + injected into the FIT creation (i.e. the blobs would have been pre- + processed before being added to the FIT image). + +config SPL_FIT_SOURCE + string ".its source file for U-Boot FIT image" + depends on SPL_FIT + help + Specifies a (platform specific) FIT source file to generate the + U-Boot FIT image. This could specify further image to load and/or + execute. + +config SPL_FIT_GENERATOR + string ".its file generator script for U-Boot FIT image" + depends on SPL_FIT + default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI + help + Specifies a (platform specific) script file to generate the FIT + source file used to build the U-Boot FIT image file. This gets + passed a list of supported device tree file stub names to + include in the generated image. + +endif # SPL + +endif # FIT + +config OF_BOARD_SETUP + bool "Set up board-specific details in device tree before boot" + depends on OF_LIBFDT + help + This causes U-Boot to call ft_board_setup() before booting into + the Operating System. This function can set up various + board-specific information in the device tree for use by the OS. + The device tree is then passed to the OS. + +config OF_SYSTEM_SETUP + bool "Set up system-specific details in device tree before boot" + depends on OF_LIBFDT + help + This causes U-Boot to call ft_system_setup() before booting into + the Operating System. This function can set up various + system-specific information in the device tree for use by the OS. + The device tree is then passed to the OS. + +config OF_STDOUT_VIA_ALIAS + bool "Update the device-tree stdout alias from U-Boot" + depends on OF_LIBFDT + help + This uses U-Boot's serial alias from the aliases node to update + the device tree passed to the OS. The "linux,stdout-path" property + in the chosen node is set to point to the correct serial node. + This option currently references CONFIG_CONS_INDEX, which is + incorrect when used with device tree as this option does not + exist / should not be used. config SYS_EXTRA_OPTIONS string "Extra Options (DEPRECATED)" @@ -178,21 +323,39 @@ config SYS_EXTRA_OPTIONS new boards should not use this option. config SYS_TEXT_BASE - depends on SPARC || ARC || X86 || ARCH_UNIPHIER + depends on ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP || \ + (M68K && !TARGET_ASTRO_MCF5373L) || MICROBLAZE || MIPS || \ + ARCH_ZYNQ || ARCH_KEYSTONE + depends on !EFI_APP hex "Text Base" help TODO: Move CONFIG_SYS_TEXT_BASE for all the architecture + config SYS_CLK_FREQ depends on ARC || ARCH_SUNXI int "CPU clock frequency" help TODO: Move CONFIG_SYS_CLK_FREQ for all the architecture +config ARCH_FIXUP_FDT_MEMORY + bool "Enable arch_fixup_memory_banks() call" + default y + help + Enable FDT memory map syncup before OS boot. This feature can be + used for booting OS with different memory setup where the part of + the memory location should be used for different purpose. + endmenu # Boot images +source "api/Kconfig" + source "common/Kconfig" +source "cmd/Kconfig" + +source "disk/Kconfig" + source "dts/Kconfig" source "net/Kconfig" @@ -204,3 +367,5 @@ source "fs/Kconfig" source "lib/Kconfig" source "test/Kconfig" + +source "scripts/Kconfig"