X-Git-Url: http://git.ipfire.org/?a=blobdiff_plain;f=README;h=6fd5a736ed4ebc6c4a54aff102349eb72c5e0e92;hb=10168b8444c1cf42884c637916d47cf59c05676a;hp=02e7e9385d765d287fcb6b19859c8937c882e692;hpb=783ed67d988bafca6d9bbbc23f3cc51d0151ee58;p=thirdparty%2Fpciutils.git diff --git a/README b/README index 02e7e93..6fd5a73 100644 --- a/README +++ b/README @@ -1,57 +1,145 @@ -This package contains the PCI Utilities, version 2.1.9. +This package contains the PCI Utilities, version @VERSION@. -Copyright (c) 1997--2001 Martin Mares +Copyright (c) 1997--2018 Martin Mares All files in this package can be freely distributed and used according to the terms of the GNU General Public License, either version 2 or -(at your opinion) any newer version. This is the same distribution -policy as for the Linux kernel itself -- see /usr/src/linux/COPYING -for details. +(at your opinion) any newer version. See https://www.gnu.org/ for details. - The PCI Utilities package contains a library for portable access to PCI bus -configuration space and several utilities based on this library. Current -version works only on Linux and also has an experimental support for FreeBSD, -but it can be easily extended to work on other systems as well. +1. What's that? +~~~~~~~~~~~~~~~ +The PCI Utilities package contains a library for portable access to PCI bus +configuration registers and several utilities based on this library. - The utilities include: (See manual pages for more details) +In runs on the following systems: - - lspci: displays detailed information about all PCI busses and devices - in the system, replacing the original /proc/pci interface. + Linux (via /sys/bus/pci, /proc/bus/pci or i386 ports) + FreeBSD (via /dev/pci) + NetBSD (via libpci) + OpenBSD (via /dev/pci) + GNU/kFreeBSD (via /dev/pci) + Solaris/i386 (direct port access) + Aix (via /dev/pci and odmget) + GNU Hurd (direct port access) + Windows (direct port access, see README.Windows for caveats) + CYGWIN (direct port access) + BeOS (via syscalls) + Haiku (via /dev/misc/poke) + Darwin (via IOKit) + DOS/DJGPP (via i386 ports) + SylixOS (via /proc/pci) - - setpci: allows to read from and write to PCI device configuration - registers. For example, you can adjust the latency timers with it. +It should be very easy to add support for other systems as well (volunteers +wanted; if you want to try that, I'll be very glad to see the patches and +include them in the next version). - The library (and therefore all the utilities) can access PCI registers -either via the /proc/bus/pci interface present since Linux 2.1.82 or -via direct hardware access (to be used with older kernels and also for -hardware diagnostics). It's also capable of reading and interpreting -register dumps printed by `lspci -x'. Unfortunately, there is no documentation -on how to use the library yet, so if you want to play with it, just ask -me for whatever you want. +The utilities include: (See manual pages for more details) - To compile the package, just run "make". To install it, "make install". + - lspci: displays detailed information about all PCI buses and devices. - If you have any bug reports or suggestions, send them to the author. + - setpci: allows to read from and write to PCI device configuration + registers. For example, you can adjust the latency timers with it. + CAUTION: There is a couple of dangerous points and caveats, please read + the manual page first! - If you want, subscribe to linux-pci@atrey.karlin.mff.cuni.cz (send -"subscribe linux-pci" to majordomo@atrey.karlin.mff.cuni.cz). -Release notes about new versions will be send to the list and problems with -the Linux PCI support will be probably discussed there, too. + - update-pciids: download the current version of the pci.ids file. - You also might want to look at the pciutils web page containing release -notes and other news: http://atrey.karlin.mff.cuni.cz/~mj/pciutils.html . - If you're missing any PCI ID's, please look at the home page of the Linux -PCI ID Repository at http://pciids.sourceforge.net/ and download an updated -pci.ids file first. If the current version doesn't contain your devices, -please send us an update either using the Web interface of the Repository -or just mail a unified diff against the latest pci.ids to pci-ids@ucw.cz. +2. Compiling and (un)installing +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Just run "make" to compile the package and then "make install" to install it. +Please note that GNU make is needed on most platforms. - There also exists a utility called PowerTweak which is able to fine tune -parameters of many chipsets much better than the Bridge Optimization code -in Linux kernel (already removed in 2.3.x). See http://powertweak.sf.net/ -for more information. +If you want to change the default installation location, please override +the PREFIX variable specified in the Makefile -- e.g., you can use +"make PREFIX=/opt/pciutils install" to create a separate installation +not interfering with the rest of your system. Setting the DESTDIR variable +will allow you to install to a different directory from the one you intend +to eventually run it from. This is useful for people who are packaging +pciutils to install on other computers. + +There are several options which can be set in the Makefile or overridden +when running make: + + ZLIB=yes/no Enable support for compressed pci.ids (requires zlib). + If it is enabled, pciutils will use pci.ids.gz in preference to + pci.ids, even if the pci.ids file is newer. If the pci.ids.gz + file is missing, it will use pci.ids instead. If you do not + specify this option, the configure script will try to guess + automatically based on the presence of zlib. + + DNS=yes/no Enable support for querying the central database of PCI IDs + using DNS. Requires libresolv (which is available on most + systems as a part of the standard libraries) and tries to + autodetect its presence if the option is not specified. + + SHARED=yes/ Build libpci as a shared library. Requires GCC 4.0 or newer. + no/local The ABI of the shared library is intended to remain backward + compatible for a long time (we use symbol versioning to achieve + that, like GNU libc does). The value `local' includes the + right directory name in the binaries, so the utilities can be + run without installation. This is not recommended for any + production builds. + +"make install-lib" installs the library together with its header files +for use by other programs. + +When you are bored of dumping PCI registers, just use "make uninstall". + + +3. Getting new IDs +~~~~~~~~~~~~~~~~~~~ +The database of PCI IDs (the pci.ids file) gets out of date much faster +than I release new versions of this package, so it is maintained separately. + +It lives at https://pci-ids.ucw.cz/, where you can browse the database, +download the most recent pci.ids file (e.g., by running the update-ids utility) +and also submit new entries. + +Alternatively, you can use `lspci -q' to query the central database +for new entries via network. + +The pci.ids file is also mirrored at https://github.com/pciutils/pciids. + +On Linux systems with a recent enough version of libudev, UDEV's HWDB +database is consulted when pci.ids lacks the device. + + +4. Getting new versions +~~~~~~~~~~~~~~~~~~~~~~~ +The current version of pciutils is available at: + + https://mj.ucw.cz/sw/pciutils/ + +The tarball can be downloaded at the following places: + + ftp://atrey.karlin.mff.cuni.cz/pub/linux/pci/ + https://www.kernel.org/pub/software/utils/pciutils/ (expect a couple of hours delay) + +There is also a public GIT tree at: + + https://git.kernel.org/pub/scm/utils/pciutils/pciutils.git + https://github.com/pciutils/pciutils + + +5. Using the library +~~~~~~~~~~~~~~~~~~~~ +So far, there is only a little documentation for the library except for the +general introduction in the pcilib(7) man page. If you want to use the +library in your programs, please follow the comments in lib/pci.h and in +the example program example.c. + + +6. Feedback +~~~~~~~~~~~ +If you have any bug reports or suggestions, send them to the author. + +If you have any new IDs, I'll be very glad to add them to the database. +Just submit them at https://pci-ids.ucw.cz/. + +Announcements of new versions are sent to linux-pci@vger.kernel.org +(see http://vger.kernel.org/ for instructions). Have fun Martin