X-Git-Url: http://git.ipfire.org/?a=blobdiff_plain;f=arch%2Farm%2FKconfig;h=b0b6f7885488f64b9f617a5c1a9e5ac8d6660c2b;hb=d56b4b19744c314c26dc77585a7c7a9253d1487d;hp=7203d63d2ad39153728701a9a3a48151eb516bb0;hpb=388019f1e2166638453bc4e0cc5d138c2a19e0c9;p=people%2Fms%2Fu-boot.git diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7203d63d2a..ad2f29165c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -19,6 +19,90 @@ config HAS_VBAR config HAS_THUMB2 bool +# Used for compatibility with asm files copied from the kernel +config ARM_ASM_UNIFIED + bool + default y + +# Used for compatibility with asm files copied from the kernel +config THUMB2_KERNEL + bool + +# If set, the workarounds for these ARM errata are applied early during U-Boot +# startup. Note that in general these options force the workarounds to be +# applied; no CPU-type/version detection exists, unlike the similar options in +# the Linux kernel. Do not set these options unless they apply! Also note that +# the following can be machine specific errata. These do have ability to +# provide rudimentary version and machine specific checks, but expect no +# product checks: +# CONFIG_ARM_ERRATA_430973 +# CONFIG_ARM_ERRATA_454179 +# CONFIG_ARM_ERRATA_621766 +# CONFIG_ARM_ERRATA_798870 +# CONFIG_ARM_ERRATA_801819 +config ARM_ERRATA_430973 + bool + +config ARM_ERRATA_454179 + bool + +config ARM_ERRATA_621766 + bool + +config ARM_ERRATA_716044 + bool + +config ARM_ERRATA_725233 + bool + +config ARM_ERRATA_742230 + bool + +config ARM_ERRATA_743622 + bool + +config ARM_ERRATA_751472 + bool + +config ARM_ERRATA_761320 + bool + +config ARM_ERRATA_773022 + bool + +config ARM_ERRATA_774769 + bool + +config ARM_ERRATA_794072 + bool + +config ARM_ERRATA_798870 + bool + +config ARM_ERRATA_801819 + bool + +config ARM_ERRATA_826974 + bool + +config ARM_ERRATA_828024 + bool + +config ARM_ERRATA_829520 + bool + +config ARM_ERRATA_833069 + bool + +config ARM_ERRATA_833471 + bool + +config ARM_ERRATA_852421 + bool + +config ARM_ERRATA_852423 + bool + config CPU_ARM720T bool select SYS_CACHE_SHIFT_5 @@ -53,6 +137,7 @@ config CPU_V7 config CPU_V7M bool select HAS_THUMB2 + select THUMB2_KERNEL select SYS_CACHE_SHIFT_5 config CPU_PXA @@ -105,6 +190,15 @@ config SYS_CACHELINE_SIZE default 64 if SYS_CACHE_SHIFT_6 default 32 if SYS_CACHE_SHIFT_5 +config ARM_SMCCC + bool "Support for ARM SMC Calling Convention (SMCCC)" + depends on CPU_V7 || ARM64 + select ARM_PSCI_FW + help + Say Y here if you want to enable ARM SMC Calling Convention. + This should be enabled if U-Boot needs to communicate with system + firmware (for example, PSCI) according to SMCCC. + config SEMIHOSTING bool "support boot from semihosting" help @@ -112,6 +206,25 @@ config SEMIHOSTING the hosted environment to call out to the emulator to retrieve files from the host machine. +config SYS_THUMB_BUILD + bool "Build U-Boot using the Thumb instruction set" + depends on !ARM64 + help + Use this flag to build U-Boot using the Thumb instruction set for + ARM architectures. Thumb instruction set provides better code + density. For ARM architectures that support Thumb2 this flag will + result in Thumb2 code generated by GCC. + +config SPL_SYS_THUMB_BUILD + bool "Build SPL using the Thumb instruction set" + default y if SYS_THUMB_BUILD + depends on !ARM64 + help + Use this flag to build SPL using the Thumb instruction set for + ARM architectures. Thumb instruction set provides better code + density. For ARM architectures that support Thumb2 this flag will + result in Thumb2 code generated by GCC. + config SYS_L2CACHE_OFF bool "L2cache off" help @@ -126,10 +239,45 @@ config ENABLE_ARM_SOC_BOOT0_HOOK ARM_SOC_BOOT0_HOOK which contains the required assembler preprocessor code. -config ARCH_OMAP2 +config ARM_CORTEX_CPU_IS_UP bool - select CPU_V7 - select SUPPORT_SPL + default n + +config USE_ARCH_MEMCPY + bool "Use an assembly optimized implementation of memcpy" + default y + depends on !ARM64 + help + Enable the generation of an optimized version of memcpy. + Such implementation may be faster under some conditions + but may increase the binary size. + +config SPL_USE_ARCH_MEMCPY + bool "Use an assembly optimized implementation of memcpy for SPL" + default y if USE_ARCH_MEMCPY + depends on !ARM64 + help + Enable the generation of an optimized version of memcpy. + Such implementation may be faster under some conditions + but may increase the binary size. + +config USE_ARCH_MEMSET + bool "Use an assembly optimized implementation of memset" + default y + depends on !ARM64 + help + Enable the generation of an optimized version of memset. + Such implementation may be faster under some conditions + but may increase the binary size. + +config SPL_USE_ARCH_MEMSET + bool "Use an assembly optimized implementation of memset for SPL" + default y if USE_ARCH_MEMSET + depends on !ARM64 + help + Enable the generation of an optimized version of memset. + Such implementation may be faster under some conditions + but may increase the binary size. config ARM64_SUPPORT_AARCH32 bool "ARM64 system support AArch32 execution state" @@ -143,6 +291,7 @@ choice config ARCH_AT91 bool "Atmel AT91" + select SPL_BOARD_INIT if SPL config TARGET_EDB93XX bool "Support edb93xx" @@ -165,6 +314,8 @@ config ARCH_DAVINCI config KIRKWOOD bool "Marvell Kirkwood" select CPU_ARM926EJS + select BOARD_EARLY_INIT_F + select ARCH_MISC_INIT config ARCH_MVEBU bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" @@ -188,10 +339,13 @@ config TARGET_WORK_92105 config TARGET_MX25PDK bool "Support mx25pdk" + select BOARD_LATE_INIT select CPU_ARM926EJS + select BOARD_EARLY_INIT_F config TARGET_ZMX25 bool "Support zmx25" + select BOARD_LATE_INIT select CPU_ARM926EJS config TARGET_APF27 @@ -218,16 +372,19 @@ config TARGET_MX23EVK bool "Support mx23evk" select CPU_ARM926EJS select SUPPORT_SPL + select BOARD_EARLY_INIT_F config TARGET_MX28EVK bool "Support mx28evk" select CPU_ARM926EJS select SUPPORT_SPL + select BOARD_EARLY_INIT_F config TARGET_MX23_OLINUXINO bool "Support mx23_olinuxino" select CPU_ARM926EJS select SUPPORT_SPL + select BOARD_EARLY_INIT_F config TARGET_BG0900 bool "Support bg0900" @@ -251,18 +408,22 @@ config ORION5X config TARGET_SPEAR300 bool "Support spear300" select CPU_ARM926EJS + select BOARD_EARLY_INIT_F config TARGET_SPEAR310 bool "Support spear310" select CPU_ARM926EJS + select BOARD_EARLY_INIT_F config TARGET_SPEAR320 bool "Support spear320" select CPU_ARM926EJS + select BOARD_EARLY_INIT_F config TARGET_SPEAR600 bool "Support spear600" select CPU_ARM926EJS + select BOARD_EARLY_INIT_F config TARGET_STV0991 bool "Support stv0991" @@ -275,21 +436,32 @@ config TARGET_STV0991 config TARGET_X600 bool "Support x600" + select BOARD_LATE_INIT select CPU_ARM926EJS select SUPPORT_SPL config TARGET_IMX31_PHYCORE - bool "Support imx31_phycore" + bool "Support imx31_phycore_eet" select CPU_ARM1136 + select BOARD_EARLY_INIT_F + +config TARGET_IMX31_PHYCORE_EET + bool "Support imx31_phycore_eet" + select BOARD_LATE_INIT + select CPU_ARM1136 + select BOARD_EARLY_INIT_F config TARGET_MX31ADS bool "Support mx31ads" select CPU_ARM1136 + select BOARD_EARLY_INIT_F config TARGET_MX31PDK bool "Support mx31pdk" + select BOARD_LATE_INIT select CPU_ARM1136 select SUPPORT_SPL + select BOARD_EARLY_INIT_F config TARGET_WOODBURN bool "Support woodburn" @@ -306,6 +478,7 @@ config TARGET_FLEA3 config TARGET_MX35PDK bool "Support mx35pdk" + select BOARD_LATE_INIT select CPU_ARM1136 config ARCH_BCM283X @@ -314,6 +487,7 @@ config ARCH_BCM283X select DM_SERIAL select DM_GPIO select OF_CONTROL + imply FAT_WRITE config TARGET_VEXPRESS_CA15_TC2 bool "Support vexpress_ca15_tc2" @@ -329,80 +503,38 @@ config TARGET_VEXPRESS_CA9X4 bool "Support vexpress_ca9x4" select CPU_V7 -config TARGET_BRXRE1 - bool "Support BRXRE1" - select ARCH_OMAP2 - -config TARGET_BRPPT1 - bool "Support BRPPT1" - select ARCH_OMAP2 - -config TARGET_DRACO - bool "Support draco" - select ARCH_OMAP2 - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_THUBAN - bool "Support thuban" - select ARCH_OMAP2 - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_RASTABAN - bool "Support rastaban" - select ARCH_OMAP2 - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_ETAMIN - bool "Support etamin" - select ARCH_OMAP2 - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_PXM2 - bool "Support pxm2" - select ARCH_OMAP2 - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_RUT - bool "Support rut" - select ARCH_OMAP2 - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_TI814X_EVM - bool "Support ti814x_evm" - select ARCH_OMAP2 - -config TARGET_TI816X_EVM - bool "Support ti816x_evm" - select ARCH_OMAP2 - config TARGET_BCM23550_W1D bool "Support bcm23550_w1d" select CPU_V7 + imply CRC32_VERIFY + imply FAT_WRITE config TARGET_BCM28155_AP bool "Support bcm28155_ap" select CPU_V7 + imply CRC32_VERIFY + imply FAT_WRITE config TARGET_BCMCYGNUS bool "Support bcmcygnus" select CPU_V7 + imply CRC32_VERIFY + imply CMD_HASH + imply FAT_WRITE + imply HASH_VERIFY config TARGET_BCMNSP bool "Support bcmnsp" select CPU_V7 +config TARGET_BCMNS2 + bool "Support Broadcom Northstar2" + select ARM64 + help + Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit + ARMv8 Cortex-A57 processors targeting a broad range of networking + applications + config ARCH_EXYNOS bool "Samsung EXYNOS" select DM @@ -412,6 +544,7 @@ config ARCH_EXYNOS select DM_SPI select DM_GPIO select DM_KEYBOARD + imply FAT_WRITE config ARCH_S5PC1XX bool "Samsung S5PC1XX" @@ -434,7 +567,17 @@ config ARCH_KEYSTONE bool "TI Keystone" select CPU_V7 select SUPPORT_SPL + select SYS_THUMB_BUILD select CMD_POWEROFF + imply CMD_MTDPARTS + imply FIT + +config ARCH_OMAP2PLUS + bool "TI OMAP2+" + select CPU_V7 + select SPL_BOARD_INIT if SPL + select SUPPORT_SPL + imply FIT config ARCH_MESON bool "Amlogic Meson" @@ -443,85 +586,45 @@ config ARCH_MESON targeted at media players and tablet computers. We currently support the S905 (GXBaby) 64-bit SoC. +config ARCH_MX7ULP + bool "NXP MX7ULP" + select CPU_V7 + select ROM_UNIFIED_SECTIONS + config ARCH_MX7 bool "Freescale MX7" select CPU_V7 + select SYS_FSL_HAS_SEC if SECURE_BOOT + select SYS_FSL_SEC_COMPAT_4 + select SYS_FSL_SEC_LE + select BOARD_EARLY_INIT_F + select ARCH_MISC_INIT config ARCH_MX6 bool "Freescale MX6" select CPU_V7 + select SYS_FSL_HAS_SEC if SECURE_BOOT + select SYS_FSL_SEC_COMPAT_4 + select SYS_FSL_SEC_LE + select SYS_THUMB_BUILD if SPL config ARCH_MX5 bool "Freescale MX5" select CPU_V7 - -config TARGET_M53EVK - bool "Support m53evk" - select CPU_V7 - select SUPPORT_SPL - -config TARGET_MX51EVK - bool "Support mx51evk" - select CPU_V7 - -config TARGET_MX53ARD - bool "Support mx53ard" - select CPU_V7 - -config TARGET_MX53EVK - bool "Support mx53evk" - select CPU_V7 - -config TARGET_MX53LOCO - bool "Support mx53loco" - select CPU_V7 - -config TARGET_MX53SMD - bool "Support mx53smd" - select CPU_V7 - -config OMAP34XX - bool "OMAP34XX SoC" - select ARCH_OMAP2 - select USE_TINY_PRINTF - -config OMAP44XX - bool "OMAP44XX SoC" - select ARCH_OMAP2 - select USE_TINY_PRINTF - -config OMAP54XX - bool "OMAP54XX SoC" - select ARCH_OMAP2 - -config AM43XX - bool "AM43XX SoC" - select ARCH_OMAP2 - help - Support for AM43xx SOC from Texas Instruments. - The AM43xx high performance SOC features a Cortex-A9 - ARM core, a quad core PRU-ICSS for industrial Ethernet - protocols, dual camera support, optional 3D graphics - and an optional customer programmable secure boot. - -config AM33XX - bool "AM33XX SoC" - select ARCH_OMAP2 - help - Support for AM335x SOC from Texas Instruments. - The AM335x high performance SOC features a Cortex-A8 - ARM core, a dual core PRU-ICSS for industrial Ethernet - protocols, optional 3D graphics and an optional customer - programmable secure boot. + select BOARD_EARLY_INIT_F config ARCH_RMOBILE bool "Renesas ARM SoCs" select DM select DM_SERIAL + select BOARD_EARLY_INIT_F + imply FAT_WRITE + imply SYS_THUMB_BUILD config TARGET_S32V234EVB bool "Support s32v234evb" select ARM64 + select SYS_FSL_ERRATUM_ESDHC111 config ARCH_SNAPDRAGON bool "Qualcomm Snapdragon SoCs" @@ -543,10 +646,13 @@ config ARCH_SOCFPGA select DM_SPI_FLASH select DM_SPI select ENABLE_ARM_SOC_BOOT0_HOOK - -config TARGET_CM_T43 - bool "Support cm_t43" - select ARCH_OMAP2 + select ARCH_EARLY_INIT_R + select ARCH_MISC_INIT + select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION + select SYS_THUMB_BUILD + imply CMD_MTDPARTS + imply CRC32_VERIFY + imply FAT_WRITE config ARCH_SUNXI bool "Support sunxi (Allwinner) SoCs" @@ -562,44 +668,42 @@ config ARCH_SUNXI select OF_BOARD_SETUP select OF_CONTROL select OF_SEPARATE - select SPL_STACK_R if SUPPORT_SPL - select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL + select SPL_STACK_R if SPL + select SPL_SYS_MALLOC_SIMPLE if SPL select SYS_NS16550 + select SPL_SYS_THUMB_BUILD if !ARM64 select USB if DISTRO_DEFAULTS select USB_STORAGE if DISTRO_DEFAULTS select USB_KEYBOARD if DISTRO_DEFAULTS select USE_TINY_PRINTF + imply FAT_WRITE + imply PRE_CONSOLE_BUFFER + imply SPL_GPIO_SUPPORT + imply SPL_LIBCOMMON_SUPPORT + imply SPL_LIBDISK_SUPPORT + imply SPL_LIBGENERIC_SUPPORT + imply SPL_MMC_SUPPORT if MMC + imply SPL_POWER_SUPPORT + imply SPL_SERIAL_SUPPORT config TARGET_TS4600 bool "Support TS4600" select CPU_ARM926EJS select SUPPORT_SPL -config TARGET_TS4800 - bool "Support TS4800" - select CPU_V7 - -config TARGET_VF610TWR - bool "Support vf610twr" - select CPU_V7 - -config TARGET_COLIBRI_VF - bool "Support Colibri VF50/61" - select CPU_V7 - -config TARGET_PCM052 - bool "Support pcm-052" - select CPU_V7 - -config TARGET_BK4R1 - bool "Support BK4r1" +config ARCH_VF610 + bool "Freescale Vybrid" select CPU_V7 + select SYS_FSL_ERRATUM_ESDHC111 + imply CMD_MTDPARTS config ARCH_ZYNQ bool "Xilinx Zynq Platform" + select BOARD_LATE_INIT select CPU_V7 select SUPPORT_SPL select OF_CONTROL + select SPL_BOARD_INIT if SPL select SPL_OF_CONTROL if SPL select DM select DM_ETH @@ -613,20 +717,29 @@ config ARCH_ZYNQ select SPL_SEPARATE_BSS if SPL select DM_USB if USB select BLK + select CLK + select SPL_CLK + select CLK_ZYNQ + imply CMD_CLK + imply FAT_WRITE config ARCH_ZYNQMP bool "Support Xilinx ZynqMP Platform" select ARM64 + select BOARD_LATE_INIT select DM select OF_CONTROL select DM_SERIAL select SUPPORT_SPL select CLK + select SPL_BOARD_INIT if SPL select SPL_CLK select DM_USB if USB + imply FAT_WRITE config TEGRA bool "NVIDIA Tegra" + imply FAT_WRITE config TARGET_VEXPRESS64_AEMV8A bool "Support vexpress_aemv8a" @@ -655,6 +768,7 @@ config TARGET_LS2080A_EMU select ARCH_LS2080A select ARM64 select ARMV8_MULTIENTRY + select ARCH_MISC_INIT help Support for Freescale LS2080A_EMU platform The LS2080A Development System (EMULATOR) is a pre silicon @@ -666,6 +780,7 @@ config TARGET_LS2080A_SIMU select ARCH_LS2080A select ARM64 select ARMV8_MULTIENTRY + select ARCH_MISC_INIT help Support for Freescale LS2080A_SIMU platform The LS2080A Development System (QDS) is a pre silicon @@ -677,7 +792,10 @@ config TARGET_LS2080AQDS select ARCH_LS2080A select ARM64 select ARMV8_MULTIENTRY + select BOARD_LATE_INIT select SUPPORT_SPL + select ARCH_MISC_INIT + imply SCSI help Support for Freescale LS2080AQDS platform The LS2080A Development System (QDS) is a high-performance @@ -689,13 +807,30 @@ config TARGET_LS2080ARDB select ARCH_LS2080A select ARM64 select ARMV8_MULTIENTRY + select BOARD_LATE_INIT select SUPPORT_SPL + select ARCH_MISC_INIT + imply SCSI help Support for Freescale LS2080ARDB platform. The LS2080A Reference design board (RDB) is a high-performance development platform that supports the QorIQ LS2080A Layerscape Architecture processor. +config TARGET_LS2081ARDB + bool "Support ls2081ardb" + select ARCH_LS2080A + select ARM64 + select ARMV8_MULTIENTRY + select BOARD_LATE_INIT + select SUPPORT_SPL + select ARCH_MISC_INIT + help + Support for Freescale LS2081ARDB platform. + The LS2081A Reference design board (RDB) is a high-performance + development platform that supports the QorIQ LS2081A/LS2041A + Layerscape Architecture processor. + config TARGET_HIKEY bool "Support HiKey 96boards Consumer Edition Platform" select ARM64 @@ -707,10 +842,24 @@ config TARGET_HIKEY Support for HiKey 96boards platform. It features a HI6220 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. +config TARGET_POPLAR + bool "Support Poplar 96boards Enterprise Edition Platform" + select ARM64 + select DM + select OF_CONTROL + select DM_SERIAL + select DM_USB + help + Support for Poplar 96boards EE platform. It features a HI3798cv200 + SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU + making it capable of running any commercial set-top solution based on + Linux or Android. + config TARGET_LS1012AQDS bool "Support ls1012aqds" select ARCH_LS1012A select ARM64 + select BOARD_LATE_INIT help Support for Freescale LS1012AQDS platform. The LS1012A Development System (QDS) is a high-performance @@ -721,6 +870,8 @@ config TARGET_LS1012ARDB bool "Support ls1012ardb" select ARCH_LS1012A select ARM64 + select BOARD_LATE_INIT + imply SCSI help Support for Freescale LS1012ARDB platform. The LS1012A Reference design board (RDB) is a high-performance @@ -739,6 +890,7 @@ config TARGET_LS1012AFRDM config TARGET_LS1021AQDS bool "Support ls1021aqds" + select BOARD_LATE_INIT select CPU_V7 select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT @@ -746,9 +898,13 @@ config TARGET_LS1021AQDS select ARCH_LS1021A select ARCH_SUPPORT_PSCI select LS1_DEEP_SLEEP + select SYS_FSL_DDR + select BOARD_EARLY_INIT_F + imply SCSI config TARGET_LS1021ATWR bool "Support ls1021atwr" + select BOARD_LATE_INIT select CPU_V7 select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT @@ -756,15 +912,19 @@ config TARGET_LS1021ATWR select ARCH_LS1021A select ARCH_SUPPORT_PSCI select LS1_DEEP_SLEEP + select BOARD_EARLY_INIT_F + imply SCSI config TARGET_LS1021AIOT bool "Support ls1021aiot" + select BOARD_LATE_INIT select CPU_V7 select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select SUPPORT_SPL select ARCH_LS1021A select ARCH_SUPPORT_PSCI + imply SCSI help Support for Freescale LS1021AIOT platform. The LS1021A Freescale board (IOT) is a high-performance @@ -776,7 +936,10 @@ config TARGET_LS1043AQDS select ARCH_LS1043A select ARM64 select ARMV8_MULTIENTRY + select BOARD_LATE_INIT select SUPPORT_SPL + select BOARD_EARLY_INIT_F + imply SCSI help Support for Freescale LS1043AQDS platform. @@ -785,7 +948,10 @@ config TARGET_LS1043ARDB select ARCH_LS1043A select ARM64 select ARMV8_MULTIENTRY + select BOARD_LATE_INIT select SUPPORT_SPL + select BOARD_EARLY_INIT_F + imply SCSI help Support for Freescale LS1043ARDB platform. @@ -794,8 +960,11 @@ config TARGET_LS1046AQDS select ARCH_LS1046A select ARM64 select ARMV8_MULTIENTRY + select BOARD_LATE_INIT select SUPPORT_SPL select DM_SPI_FLASH if DM_SPI + select BOARD_EARLY_INIT_F + imply SCSI help Support for Freescale LS1046AQDS platform. The LS1046A Development System (QDS) is a high-performance @@ -807,8 +976,12 @@ config TARGET_LS1046ARDB select ARCH_LS1046A select ARM64 select ARMV8_MULTIENTRY + select BOARD_LATE_INIT select SUPPORT_SPL select DM_SPI_FLASH if DM_SPI + select POWER_MC34VR500 + select BOARD_EARLY_INIT_F + imply SCSI help Support for Freescale LS1046ARDB platform. The LS1046A Reference Design Board (RDB) is a high-performance @@ -829,7 +1002,7 @@ config TARGET_COLIBRI_PXA270 config ARCH_UNIPHIER bool "Socionext UniPhier SoCs" - select BLK + select BOARD_LATE_INIT select CLK_UNIPHIER select DM select DM_GPIO @@ -841,13 +1014,14 @@ config ARCH_UNIPHIER select OF_CONTROL select OF_LIBFDT select PINCTRL - select SPL - select SPL_DM - select SPL_LIBCOMMON_SUPPORT - select SPL_LIBGENERIC_SUPPORT - select SPL_OF_CONTROL - select SPL_PINCTRL + select SPL_BOARD_INIT if SPL + select SPL_DM if SPL + select SPL_LIBCOMMON_SUPPORT if SPL + select SPL_LIBGENERIC_SUPPORT if SPL + select SPL_OF_CONTROL if SPL + select SPL_PINCTRL if SPL select SUPPORT_SPL + imply FAT_WRITE help Support for UniPhier SoC family developed by Socionext Inc. (formerly, System LSI Business Division of Panasonic Corporation) @@ -857,6 +1031,19 @@ config STM32 select CPU_V7M select DM select DM_SERIAL + select SYS_THUMB_BUILD + +config ARCH_STI + bool "Support STMicrolectronics SoCs" + select CPU_V7 + select DM + select DM_SERIAL + select BLK + select DM_MMC + select DM_RESET + help + Support for STMicroelectronics STiH407/10 SoC family. + This SoC is used on Linaro 96Board STiH410-B2260 config ARCH_ROCKCHIP bool "Support Rockchip SoCs" @@ -865,6 +1052,7 @@ config ARCH_ROCKCHIP select DM select SPL_DM if SPL select SYS_MALLOC_F + select SYS_THUMB_BUILD if !ARM64 select SPL_SYS_MALLOC_SIMPLE if SPL select DM_GPIO select DM_I2C @@ -876,6 +1064,7 @@ config ARCH_ROCKCHIP select DM_USB if USB select DM_PWM select DM_REGULATOR + imply FAT_WRITE config TARGET_THUNDERX_88XX bool "Support ThunderX 88xx" @@ -883,8 +1072,15 @@ config TARGET_THUNDERX_88XX select OF_CONTROL select SYS_CACHE_SHIFT_7 +config ARCH_ASPEED + bool "Support Aspeed SoCs" + select OF_CONTROL + select DM + endchoice +source "arch/arm/mach-aspeed/Kconfig" + source "arch/arm/mach-at91/Kconfig" source "arch/arm/mach-bcm283x/Kconfig" @@ -905,11 +1101,13 @@ source "arch/arm/mach-mvebu/Kconfig" source "arch/arm/cpu/armv7/ls102xa/Kconfig" -source "arch/arm/cpu/armv7/mx7/Kconfig" +source "arch/arm/mach-imx/mx7ulp/Kconfig" + +source "arch/arm/mach-imx/mx7/Kconfig" -source "arch/arm/cpu/armv7/mx6/Kconfig" +source "arch/arm/mach-imx/mx6/Kconfig" -source "arch/arm/cpu/armv7/mx5/Kconfig" +source "arch/arm/mach-imx/mx5/Kconfig" source "arch/arm/mach-omap2/Kconfig" @@ -929,12 +1127,18 @@ source "arch/arm/mach-snapdragon/Kconfig" source "arch/arm/mach-socfpga/Kconfig" +source "arch/arm/mach-sti/Kconfig" + source "arch/arm/mach-stm32/Kconfig" +source "arch/arm/mach-sunxi/Kconfig" + source "arch/arm/mach-tegra/Kconfig" source "arch/arm/mach-uniphier/Kconfig" +source "arch/arm/cpu/armv7/vf610/Kconfig" + source "arch/arm/mach-zynq/Kconfig" source "arch/arm/cpu/armv7/Kconfig" @@ -943,11 +1147,10 @@ source "arch/arm/cpu/armv8/zynqmp/Kconfig" source "arch/arm/cpu/armv8/Kconfig" -source "arch/arm/imx-common/Kconfig" +source "arch/arm/mach-imx/Kconfig" +source "board/aries/m28evk/Kconfig" source "board/bosch/shc/Kconfig" -source "board/BuR/brxre1/Kconfig" -source "board/BuR/brppt1/Kconfig" source "board/CarMediaLab/flea3/Kconfig" source "board/Marvell/aspenite/Kconfig" source "board/Marvell/gplugd/Kconfig" @@ -959,13 +1162,10 @@ source "board/broadcom/bcm23550_w1d/Kconfig" source "board/broadcom/bcm28155_ap/Kconfig" source "board/broadcom/bcmcygnus/Kconfig" source "board/broadcom/bcmnsp/Kconfig" +source "board/broadcom/bcmns2/Kconfig" source "board/cavium/thunderx/Kconfig" source "board/cirrus/edb93xx/Kconfig" -source "board/compulab/cm_t335/Kconfig" -source "board/compulab/cm_t43/Kconfig" source "board/creative/xfi3/Kconfig" -source "board/denx/m28evk/Kconfig" -source "board/denx/m53evk/Kconfig" source "board/freescale/ls2080a/Kconfig" source "board/freescale/ls2080aqds/Kconfig" source "board/freescale/ls2080ardb/Kconfig" @@ -985,27 +1185,20 @@ source "board/freescale/mx28evk/Kconfig" source "board/freescale/mx31ads/Kconfig" source "board/freescale/mx31pdk/Kconfig" source "board/freescale/mx35pdk/Kconfig" -source "board/freescale/mx51evk/Kconfig" -source "board/freescale/mx53ard/Kconfig" -source "board/freescale/mx53evk/Kconfig" -source "board/freescale/mx53loco/Kconfig" -source "board/freescale/mx53smd/Kconfig" source "board/freescale/s32v234evb/Kconfig" -source "board/freescale/vf610twr/Kconfig" +source "board/gdsys/a38x/Kconfig" +source "board/grinn/chiliboard/Kconfig" source "board/gumstix/pepper/Kconfig" source "board/h2200/Kconfig" source "board/hisilicon/hikey/Kconfig" +source "board/hisilicon/poplar/Kconfig" source "board/imx31_phycore/Kconfig" -source "board/isee/igep0033/Kconfig" +source "board/isee/igep003x/Kconfig" source "board/olimex/mx23_olinuxino/Kconfig" source "board/phytec/pcm051/Kconfig" -source "board/phytec/pcm052/Kconfig" source "board/ppcag/bg0900/Kconfig" source "board/sandisk/sansa_fuze_plus/Kconfig" source "board/schulercontrol/sc_sps_1/Kconfig" -source "board/siemens/draco/Kconfig" -source "board/siemens/pxm2/Kconfig" -source "board/siemens/rut/Kconfig" source "board/silica/pengwyn/Kconfig" source "board/spear/spear300/Kconfig" source "board/spear/spear310/Kconfig" @@ -1013,19 +1206,12 @@ source "board/spear/spear320/Kconfig" source "board/spear/spear600/Kconfig" source "board/spear/x600/Kconfig" source "board/st/stv0991/Kconfig" -source "board/sunxi/Kconfig" source "board/syteco/zmx25/Kconfig" source "board/tcl/sl50/Kconfig" -source "board/ti/am335x/Kconfig" -source "board/ti/am43xx/Kconfig" source "board/birdland/bav335x/Kconfig" -source "board/ti/ti814x/Kconfig" -source "board/ti/ti816x/Kconfig" source "board/timll/devkit3250/Kconfig" source "board/toradex/colibri_pxa270/Kconfig" -source "board/toradex/colibri_vf/Kconfig" source "board/technologic/ts4600/Kconfig" -source "board/technologic/ts4800/Kconfig" source "board/vscom/baltos/Kconfig" source "board/woodburn/Kconfig" source "board/work-microwave/work_92105/Kconfig"