X-Git-Url: http://git.ipfire.org/?a=blobdiff_plain;f=include%2Fconfigs%2FAPC405.h;h=8179e1b0436b298e379a88ebf9b98754fd4e479b;hb=2ae1824196884ba2bafffb7c0d3e8297350591e9;hp=7453518bfdd91cb0c5189801fea628c025be8c23;hpb=cb5473205206c7f14cbb1e747f28ec75b48826e2;p=people%2Fms%2Fu-boot.git

diff --git a/include/configs/APC405.h b/include/configs/APC405.h
index 7453518bfd..8179e1b043 100644
--- a/include/configs/APC405.h
+++ b/include/configs/APC405.h
@@ -38,6 +38,8 @@
 #define CONFIG_4xx		1	/* ...member of PPC4xx family   */
 #define CONFIG_APCG405		1	/* ...on a APC405 board		*/
 
+#define	CONFIG_SYS_TEXT_BASE	0xFFF80000
+
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/
 #define CONFIG_BOARD_EARLY_INIT_R 1
 #define CONFIG_MISC_INIT_R      1       /* call misc_init_r()           */
@@ -104,6 +106,7 @@
 #define CONFIG_NET_MULTI	1
 #undef  CONFIG_HAS_ETH1
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_LXT971_NO_SLEEP	1
@@ -124,19 +127,19 @@
  */
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_ELF
-#define CONFIG_CMD_DATE
+#define CONFIG_CMD_FAT
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_IRQ
 #define CONFIG_CMD_MII
+#define CONFIG_CMD_PCI
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_SOURCE
 #define CONFIG_CMD_USB
-#define CONFIG_CMD_AUTOSCRIPT
 
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -175,6 +178,12 @@
 #define CONFIG_SYS_MEMTEST_START	0x0400000 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM */
 
+#define CONFIG_CONS_INDEX	1	/* Use UART0			*/
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
+
 #define CONFIG_SYS_EXT_SERIAL_CLOCK    14745600 /* use external serial clock   */
 
 /* The following table includes the supported baudrates */
@@ -263,16 +272,10 @@
 /*
  * FLASH organization
  */
-#ifndef __ASSEMBLY__
-extern int flash_banks;
-#endif
-
 #define CONFIG_SYS_FLASH_BASE		0xFE000000
 #define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
 #define CONFIG_SYS_MAX_FLASH_SECT	256	/* max num of sects on one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS	flash_banks /* max num of flash banks */
-					    /* updated in board_early_init_r */
 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 2
 #define CONFIG_SYS_FLASH_QUIET_TEST	1
 #define CONFIG_SYS_FLASH_INCREMENT	0x01000000
@@ -304,6 +307,7 @@ extern int flash_banks;
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
 #define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE		0x7F