X-Git-Url: http://git.ipfire.org/?a=blobdiff_plain;f=include%2Fconfigs%2FBSC9132QDS.h;h=3a733795ae2066d5c24d31fc468486b4dd5779d1;hb=89cb2b5f8be4f6d04bd87220aa8f72eb0850edc4;hp=9f7ceb838ed3ad93bc371cb571afe5de2512126b;hpb=88033d737d9f46e7eebda6a8f9770957eb9aae9c;p=people%2Fms%2Fu-boot.git

diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index 9f7ceb838e..3a733795ae 100644
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -93,7 +93,6 @@
 
 #define CONFIG_CMD_PCI
 
-
 /*
  * PCI Windows
  * Memory space is mapped 1-1, but I/O space must start from 0.
@@ -223,7 +222,6 @@ combinations. this should be removed later
 #define CONFIG_SYS_DDR_TIMING_5	CONFIG_SYS_DDR_TIMING_5_800
 #endif
 
-
 /* relocated CCSRBAR */
 #define CONFIG_SYS_CCSRBAR	CONFIG_SYS_CCSRBAR_DEFAULT
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR_DEFAULT
@@ -396,9 +394,9 @@ combinations. this should be removed later
 
 #define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000	/* stack in RAM */
-#define CONFIG_SYS_INIT_RAM_END		0x00004000 /* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_SIZE	0x00004000 /* End of used area in RAM */
 
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END \
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE \
 						- GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
@@ -425,12 +423,6 @@ combinations. this should be removed later
 #define CONFIG_SYS_NS16550_COM3	(CONFIG_SYS_CCSRBAR + 0x4700)
 #define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_CCSRBAR + 0x4800)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER    /* hush parser */
-#ifdef	CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#endif
-
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
 #define CONFIG_SYS_FSL_I2C_SPEED	400800 /* I2C speed and slave address*/
@@ -468,7 +460,6 @@ combinations. this should be removed later
  */
 /* eSPI - Enhanced SPI */
 #ifdef CONFIG_FSL_ESPI
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED		10000000
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
 #endif
@@ -507,7 +498,6 @@ combinations. this should be removed later
 
 #define CONFIG_MMC
 #ifdef CONFIG_MMC
-#define CONFIG_CMD_MMC
 #define CONFIG_DOS_PARTITION
 #define CONFIG_FSL_ESDHC
 #define CONFIG_GENERIC_MMC
@@ -516,7 +506,6 @@ combinations. this should be removed later
 
 #define CONFIG_USB_EHCI  /* USB */
 #ifdef CONFIG_USB_EHCI
-#define CONFIG_CMD_USB
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_USB_STORAGE
@@ -563,17 +552,11 @@ combinations. this should be removed later
  * Command line configuration.
  */
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 
@@ -601,7 +584,6 @@ combinations. this should be removed later
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 64 MB of memory, since this is