X-Git-Url: http://git.ipfire.org/?a=blobdiff_plain;f=include%2Fconfigs%2FPLU405.h;h=0e6ad7af471f3f6496209ccb4fb470d8c2c75696;hb=adad96e60d0eb1bbc4d0b96c89decf385a426e42;hp=912bcf59f84b65eb9d50ba08afcfea6997a1bebe;hpb=3765b3e7bd0f8e46914d417f29cbcb0c72b1acf7;p=people%2Fms%2Fu-boot.git

diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index 912bcf59f8..0e6ad7af47 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -18,10 +18,10 @@
  */
 
 #define CONFIG_405EP		1	/* This is a PPC405 CPU		*/
-#define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
 #define CONFIG_PLU405		1	/* ...on a PLU405 board		*/
 
 #define	CONFIG_SYS_TEXT_BASE	0xFFF80000
+#define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/
 #define CONFIG_MISC_INIT_R	1	/* call misc_init_r()		*/
@@ -60,14 +60,11 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_FAT
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_I2C
@@ -76,9 +73,6 @@
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_USB
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 
@@ -95,9 +89,7 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
-#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
@@ -118,7 +110,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
 #define CONFIG_CONS_INDEX	1	/* Use UART0			*/
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
@@ -134,21 +125,10 @@
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
 #define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
 
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 #define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/
 
-/* Only interrupt boot if space is pressed */
-/* If a long serial cable is connected but */
-/* other end is dead, garbage will be read */
-#define CONFIG_AUTOBOOT_KEYED	1
-#define CONFIG_AUTOBOOT_PROMPT	\
-	"Press SPACE to abort autoboot in %d seconds\n", bootdelay
-#undef CONFIG_AUTOBOOT_DELAY_STR
-#define CONFIG_AUTOBOOT_STOP_STR " "
-
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
 #define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */