X-Git-Url: http://git.ipfire.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fa4m072.h;h=b5be7b2806bc76f28adf793c3b3f031f3e4d02c2;hb=8435179271106ec6fe9a9a5679b897755b1db8dd;hp=d243bc12c0273317f95262138949a15d84605997;hpb=5b9c79a81db80c3f9e50c77477957cd803429af8;p=people%2Fms%2Fu-boot.git

diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h
index d243bc12c0..b5be7b2806 100644
--- a/include/configs/a4m072.h
+++ b/include/configs/a4m072.h
@@ -5,7 +5,7 @@
  * (C) Copyright 2010
  * Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com.
  *
- * SPDX-License-Identifier:	GPL-2.0+ 
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -16,8 +16,7 @@
  * (easy to change)
  */
 
-#define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
-#define CONFIG_MPC5200		1	/* (more precisely a MPC5200 CPU) */
+#define CONFIG_MPC5200		1	/* This is a MPC5200 CPU */
 #define CONFIG_A4M072		1	/* ... on A4M072 board */
 #define CONFIG_MPC5200_DDR	1	/* ... use DDR RAM */
 
@@ -70,7 +69,6 @@
 
 /* USB */
 #define CONFIG_USB_OHCI_NEW
-#define CONFIG_USB_STORAGE
 #define CONFIG_SYS_OHCI_BE_CONTROLLER
 #undef CONFIG_SYS_USB_OHCI_BOARD_INIT
 #define CONFIG_SYS_USB_OHCI_CPU_INIT	1
@@ -88,22 +86,11 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_IDE
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_SNTP
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_DISPLAY
 
 #if defined(CONFIG_PCI)
@@ -118,14 +105,9 @@
 /*
  * Autobooting
  */
-#define CONFIG_BOOTDELAY	2	/* autoboot after 2 seconds */
 
 #define CONFIG_SYS_AUTOLOAD	"n"
 
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT		"autoboot in %d seconds\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR	"asdfg"
-
 #undef	CONFIG_BOOTARGS
 #define CONFIG_PREBOOT				"run try_update"
 
@@ -164,7 +146,6 @@
 			"setenv bootargs ${bootargs} no_ethaddr;"	\
 		"fi\0"							\
 	"hostname=CPUP0\0"						\
-	"ethaddr=00:00:00:00:00:00\0"					\
 	"netdev=eth0\0"							\
 	"bootcmd=run bootcmd_nor\0" 					\
 	""
@@ -235,7 +216,6 @@
 #define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
 #define CONFIG_SYS_INIT_RAM_SIZE		MPC5XXX_SRAM_SIZE	/* Size of used area in DPRAM */
 
-
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
@@ -268,10 +248,8 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_CMDLINE_EDITING	1
 #define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
-#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt   */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
@@ -286,14 +264,11 @@
 
 #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */
-
 #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
 #  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
-
 /*
  * Various low-level settings
  */
@@ -365,9 +340,6 @@
  * Open firmware flat tree support
  *-----------------------------------------------------------------------
  */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-
 #define OF_CPU			"PowerPC,5200@0"
 #define OF_SOC			"soc5200@f0000000"
 #define OF_TBCLK		(bd->bi_busfreq / 4)