X-Git-Url: http://git.ipfire.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fblackstamp.h;h=6eb83a05a7e3e737fc929f7a3fcf46003afbdf0a;hb=89cb2b5f8be4f6d04bd87220aa8f72eb0850edc4;hp=85f08ea88804dfa1d1bcaa3fdcd64173ee93f07c;hpb=3df4f46f3209c067dcadc969ed02d27c97fa3632;p=people%2Fms%2Fu-boot.git

diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h
index 85f08ea888..6eb83a05a7 100644
--- a/include/configs/blackstamp.h
+++ b/include/configs/blackstamp.h
@@ -1,5 +1,5 @@
 /*
- * U-boot - Configuration file for BlackStamp board
+ * U-Boot - Configuration file for BlackStamp board
  * Configuration by Ben Matthews for UR LLE using bf533-stamp.h
  * as a template
  * See http://blackfin.uclinux.org/gf/project/blackstamp/
@@ -30,7 +30,6 @@
 /*
  * Board settings
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111	1
 #define CONFIG_SMC91111_BASE	0x20300300
 
@@ -41,7 +40,6 @@
 #define SHARED_RESOURCES	1
 
 /* Is I2C bit-banged? */
-#undef CONFIG_SOFT_I2
 
 /*
  * Clock Settings
@@ -76,11 +74,8 @@
 #define CONFIG_GATEWAYIP	192.168.0.1
 #define CONFIG_SERVERIP		192.168.0.2
 #define CONFIG_HOSTNAME		blackstamp
-#define CONFIG_ROOTPATH		/checkout/uClinux-dist/romfs
+#define CONFIG_ROOTPATH		"/checkout/uClinux-dist/romfs"
 #define CONFIG_SYS_AUTOLOAD		"no"
-
-/* To remove hardcoding and enable MAC storage in EEPROM  */
-/* #define CONFIG_ETHADDR		02:80:ad:20:31:b8 */
 #endif
 
 #define CONFIG_ENV_IS_IN_SPI_FLASH
@@ -107,36 +102,20 @@
 #define CONFIG_AUTO_COMPLETE	1
 #define CONFIG_ENV_OVERWRITE	1
 
-#include <config_cmd_default.h>
-
-#ifdef CONFIG_SMC91111
-# define CONFIG_CMD_DHCP
-# define CONFIG_CMD_PING
-#else
-# undef CONFIG_CMD_NET
-#endif
-
-#ifdef CONFIG_SOFT_I2C
-# define CONFIG_CMD_I2C
-#endif
-
 #define CONFIG_CMD_BOOTLDR
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_CPLBINFO
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_ELF
 
 #define CONFIG_BOOTDELAY     5
 #define CONFIG_BOOTCOMMAND   "run ramboot"
 #define CONFIG_BOOTARGS \
 	"root=/dev/mtdblock0 rw " \
-	"clkin_hz=" MK_STR(CONFIG_CLKIN_HZ) " " \
+	"clkin_hz=" __stringify(CONFIG_CLKIN_HZ) " " \
 	"earlyprintk=" \
 		"serial," \
-		"uart" MK_STR(CONFIG_UART_CONSOLE) "," \
-		MK_STR(CONFIG_BAUDRATE) " " \
-	"console=ttyBF0," MK_STR(CONFIG_BAUDRATE)
+		"uart" __stringify(CONFIG_UART_CONSOLE) "," \
+		__stringify(CONFIG_BAUDRATE) " " \
+	"console=ttyBF0," __stringify(CONFIG_BAUDRATE)
 
 #if defined(CONFIG_CMD_NET)
 # if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
@@ -150,7 +129,7 @@
 		"eeprom write $(loadaddr) 0x0 $(filesize)"
 #  else
 #   define UBOOT_ENV_UPDATE \
-		"sf probe " MK_STR(BFIN_BOOT_SPI_SSEL) ";" \
+		"sf probe " __stringify(BFIN_BOOT_SPI_SSEL) ";" \
 		"sf erase 0 0x40000;" \
 		"sf write $(loadaddr) 0 $(filesize)"
 #  endif
@@ -197,6 +176,7 @@
 #define CONFIG_BAUDRATE		57600
 #define CONFIG_LOADS_ECHO	1
 #define CONFIG_UART_CONSOLE	0
+#define CONFIG_BFIN_SERIAL
 
 /*
  * I2C settings
@@ -205,11 +185,11 @@
  * Note these pins are arbitrarily chosen because we aren't using
  * them yet. You can (and probably should) change these values!
  */
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
 #define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF9
 #define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF8
-#define CONFIG_SYS_I2C_SPEED		50000
-#define CONFIG_SYS_I2C_SLAVE		0xFE
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0xFE
 #endif
 
 /*
@@ -224,8 +204,6 @@
 /* For the M25P64 SCK Should be Kept < 15Mhz */
 #define CONFIG_ENV_SPI_MAX_HZ	15000000
 #define CONFIG_SF_DEFAULT_SPEED	15000000
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
 
 /*
  * FLASH organization and environment definitions
@@ -242,8 +220,6 @@
  * hardware don't support Parallel Flash at all.
  */
 #define CONFIG_SYS_NO_FLASH
-#undef CONFIG_CMD_IMLS
 #undef CONFIG_CMD_JFFS2
-#undef CONFIG_CMD_FLASH
 
 #endif