X-Git-Url: http://git.ipfire.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fmicroblaze-generic.h;h=801d674610003a4f40feaa1bcd197c7db353ab68;hb=89cb2b5f8be4f6d04bd87220aa8f72eb0850edc4;hp=8db6b551ceda81d547e3eed43afb5aa1ce03ccb4;hpb=4632b1ea2080cab08c6e2062de1a05059fd41e5f;p=people%2Fms%2Fu-boot.git

diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index 8db6b551ce..801d674610 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -32,80 +32,29 @@
 #endif
 
 /* uart */
-#ifdef XILINX_UARTLITE_BASEADDR
-# define CONFIG_XILINX_UARTLITE
-# define CONFIG_SERIAL_BASE	XILINX_UARTLITE_BASEADDR
-# define CONFIG_BAUDRATE	XILINX_UARTLITE_BAUDRATE
-# define CONFIG_SYS_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
-# define CONSOLE_ARG	"console=console=ttyUL0,115200\0"
-#elif XILINX_UART16550_BASEADDR
-# define CONFIG_SYS_NS16550_SERIAL
-# if defined(__MICROBLAZEEL__)
-#  define CONFIG_SYS_NS16550_REG_SIZE	-4
-# else
-#  define CONFIG_SYS_NS16550_REG_SIZE	4
-# endif
-# define CONFIG_CONS_INDEX		1
-# define CONFIG_SYS_NS16550_COM1 \
-		((XILINX_UART16550_BASEADDR & ~0xF) + 0x1000)
-# define CONFIG_SYS_NS16550_CLK	XILINX_UART16550_CLOCK_HZ
 # define CONFIG_BAUDRATE	115200
-
 /* The following table includes the supported baudrates */
 # define CONFIG_SYS_BAUDRATE_TABLE \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-# define CONSOLE_ARG	"console=console=ttyS0,115200\0"
-#else
-# error Undefined uart
-#endif
 
 /* setting reset address */
 /*#define	CONFIG_SYS_RESET_ADDRESS	CONFIG_SYS_TEXT_BASE*/
 
-/* ethernet */
-#undef CONFIG_SYS_ENET
-#if defined(XILINX_EMACLITE_BASEADDR) || defined(CONFIG_OF_CONTROL)
-# define CONFIG_XILINX_EMACLITE	1
-# define CONFIG_SYS_ENET
-#endif
-#if defined(XILINX_AXIEMAC_BASEADDR)
-# define CONFIG_XILINX_AXIEMAC	1
-# define CONFIG_SYS_ENET
-#endif
-
-#undef ET_DEBUG
-
 /* gpio */
 #ifdef XILINX_GPIO_BASEADDR
 # define CONFIG_XILINX_GPIO
 # define CONFIG_SYS_GPIO_0_ADDR		XILINX_GPIO_BASEADDR
 #endif
-
-/* interrupt controller */
-#ifdef XILINX_INTC_BASEADDR
-# define CONFIG_SYS_INTC_0_ADDR		XILINX_INTC_BASEADDR
-# define CONFIG_SYS_INTC_0_NUM		XILINX_INTC_NUM_INTR_INPUTS
-#endif
-
-/* timer */
-#if defined(XILINX_TIMER_BASEADDR) && defined(XILINX_TIMER_IRQ)
-#  define CONFIG_SYS_TIMER_0_ADDR	XILINX_TIMER_BASEADDR
-#  define CONFIG_SYS_TIMER_0_IRQ	XILINX_TIMER_IRQ
-#endif
+#define CONFIG_BOARD_LATE_INIT
 
 /* watchdog */
 #if defined(XILINX_WATCHDOG_BASEADDR) && defined(XILINX_WATCHDOG_IRQ)
 # define CONFIG_WATCHDOG_BASEADDR	XILINX_WATCHDOG_BASEADDR
 # define CONFIG_WATCHDOG_IRQ		XILINX_WATCHDOG_IRQ
-# define CONFIG_HW_WATCHDOG
-# define CONFIG_XILINX_TB_WATCHDOG
-#endif
-
-#if !defined(CONFIG_OF_CONTROL) || \
-	(defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_OF_CONTROL))
-/* ddr sdram - main memory */
-# define CONFIG_SYS_SDRAM_BASE	XILINX_RAM_START
-# define CONFIG_SYS_SDRAM_SIZE	XILINX_RAM_SIZE
+# ifndef CONFIG_SPL_BUILD
+#  define CONFIG_HW_WATCHDOG
+#  define CONFIG_XILINX_TB_WATCHDOG
+# endif
 #endif
 
 #define CONFIG_SYS_MALLOC_LEN	0xC0000
@@ -196,16 +145,6 @@
 #endif /* !SPIFLASH */
 #endif /* !FLASH */
 
-/* system ace */
-#ifdef XILINX_SYSACE_BASEADDR
-# define CONFIG_SYSTEMACE
-/* #define DEBUG_SYSTEMACE */
-# define SYSTEMACE_CONFIG_FPGA
-# define CONFIG_SYS_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
-# define CONFIG_SYS_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
-# define CONFIG_DOS_PARTITION
-#endif
-
 #if defined(XILINX_USE_ICACHE)
 # define CONFIG_ICACHE
 #else
@@ -233,25 +172,11 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_MFSL
 
 #if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE)
-# define CONFIG_CMD_CACHE
 #else
-# undef CONFIG_CMD_CACHE
-#endif
-
-#ifdef CONFIG_SYS_ENET
-# define CONFIG_CMD_PING
-# define CONFIG_CMD_DHCP
-# define CONFIG_CMD_TFTPPUT
-#endif
-
-#if defined(CONFIG_SYSTEMACE)
-# define CONFIG_CMD_EXT2
-# define CONFIG_CMD_FAT
 #endif
 
 #if defined(FLASH)
@@ -265,7 +190,6 @@
 
 #else
 #if defined(SPIFLASH)
-# define CONFIG_CMD_SF
 
 # if !defined(RAMENV)
 #  define CONFIG_CMD_SAVES
@@ -313,7 +237,7 @@
 #define	CONFIG_SYS_MAXARGS	15
 #define	CONFIG_SYS_LONGHELP
 /* default load address */
-#define	CONFIG_SYS_LOAD_ADDR	XILINX_RAM_START
+#define	CONFIG_SYS_LOAD_ADDR	0
 
 #define	CONFIG_BOOTDELAY	-1	/* -1 disables auto-boot */
 #define	CONFIG_BOOTARGS		"root=romfs"
@@ -340,36 +264,27 @@
 
 #define CONFIG_CMDLINE_EDITING
 
-#define CONFIG_NETCONSOLE
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
 /* Enable flat device tree support */
 #define CONFIG_LMB		1
-#define CONFIG_FIT		1
-#define CONFIG_OF_LIBFDT	1
 
 #if defined(CONFIG_XILINX_AXIEMAC)
 # define CONFIG_MII		1
-# define CONFIG_CMD_MII		1
 # define CONFIG_PHY_GIGE	1
 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	1
-# define CONFIG_PHYLIB		1
 # define CONFIG_PHY_ATHEROS	1
 # define CONFIG_PHY_BROADCOM	1
 # define CONFIG_PHY_DAVICOM	1
 # define CONFIG_PHY_LXT		1
 # define CONFIG_PHY_MARVELL	1
 # define CONFIG_PHY_MICREL	1
+# define CONFIG_PHY_MICREL_KSZ9021
 # define CONFIG_PHY_NATSEMI	1
 # define CONFIG_PHY_REALTEK	1
 # define CONFIG_PHY_VITESSE	1
 #else
 # undef CONFIG_MII
-# undef CONFIG_CMD_MII
-# undef CONFIG_PHYLIB
 #endif
 
 /* SPL part */