X-Git-Url: http://git.ipfire.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx6sabre_common.h;h=d976e77aef7fa83576ff086a2a7bf6538dce94d6;hb=10117a298554d586e7a288a9fa0b574ce35d62a0;hp=6c3c52e3e009c8d53b8210f39f317377baa3b635;hpb=808bf7cf655a1caa5f48f6f3a6b274f4b83ab8b4;p=people%2Fms%2Fu-boot.git

diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index 6c3c52e3e0..d976e77aef 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -11,27 +11,16 @@
 
 #include "mx6_common.h"
 
-#define CONFIG_IMX6_THERMAL
+#define CONFIG_IMX_THERMAL
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
 #define CONFIG_MXC_UART
 
-#define CONFIG_CMD_FUSE
-#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
-#define CONFIG_MXC_OCOTP
-#endif
-
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
@@ -39,22 +28,15 @@
 #define CONFIG_ETHPRIME			"FEC"
 #define CONFIG_FEC_MXC_PHYADDR		1
 
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
-#define CONFIG_CMD_SF
 #ifdef CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS		0
 #define CONFIG_SF_DEFAULT_CS		0
 #define CONFIG_SF_DEFAULT_SPEED		20000000
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
 #endif
 
-/* Command definition */
-#define CONFIG_CMD_BMODE
-
 #ifdef CONFIG_SUPPORT_EMMC_BOOT
 #define EMMC_ENV \
 	"emmcdev=2\0" \
@@ -75,19 +57,25 @@
 #define EMMC_ENV ""
 #endif
 
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
 	"image=zImage\0" \
-	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
+	"fdt_file=undefined\0" \
 	"fdt_addr=0x18000000\0" \
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
-	"console=" CONFIG_CONSOLE_DEV "\0" \
+	"console=" CONSOLE_DEV "\0" \
+	"dfuspi=dfu 0 sf 0:0:10000000:0\0" \
+	"dfu_alt_info_spl=spl raw 0x400\0" \
+	"dfu_alt_info_img=u-boot raw 0x10000\0" \
+	"dfu_alt_info=spl raw 0x400\0" \
 	"fdt_high=0xffffffff\0"	  \
 	"initrd_high=0xffffffff\0" \
 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 	"mmcpart=1\0" \
-	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+	"finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
 	"update_sd_firmware=" \
 		"if test ${ip_dyn} = yes; then " \
 			"setenv get_cmd dhcp; " \
@@ -103,7 +91,7 @@
 		"fi\0" \
 	EMMC_ENV	  \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=${mmcroot}\0" \
+		"root=PARTUUID=${uuid} rootwait rw\0" \
 	"loadbootscript=" \
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
@@ -111,6 +99,7 @@
 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
+		"run finduuid; " \
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \
@@ -148,9 +137,27 @@
 			"fi; " \
 		"else " \
 			"bootz; " \
-		"fi;\0"
+		"fi;\0" \
+		"findfdt="\
+			"if test $fdt_file = undefined; then " \
+				"if test $board_name = SABREAUTO && test $board_rev = MX6QP; then " \
+					"setenv fdt_file imx6qp-sabreauto.dtb; fi; " \
+				"if test $board_name = SABREAUTO && test $board_rev = MX6Q; then " \
+					"setenv fdt_file imx6q-sabreauto.dtb; fi; " \
+				"if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \
+					"setenv fdt_file imx6dl-sabreauto.dtb; fi; " \
+				"if test $board_name = SABRESD && test $board_rev = MX6QP; then " \
+					"setenv fdt_file imx6qp-sabresd.dtb; fi; " \
+				"if test $board_name = SABRESD && test $board_rev = MX6Q; then " \
+					"setenv fdt_file imx6q-sabresd.dtb; fi; " \
+				"if test $board_name = SABRESD && test $board_rev = MX6DL; then " \
+					"setenv fdt_file imx6dl-sabresd.dtb; fi; " \
+				"if test $fdt_file = undefined; then " \
+					"echo WARNING: Could not determine dtb to use; fi; " \
+			"fi;\0" \
 
 #define CONFIG_BOOTCOMMAND \
+	"run findfdt;" \
 	"mmc dev ${mmcdev};" \
 	"if mmc rescan; then " \
 		"if run loadbootscript; then " \
@@ -169,8 +176,6 @@
 #define CONFIG_SYS_MEMTEST_END         0x10010000
 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 
-#define CONFIG_STACKSIZE               (128 * 1024)
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
@@ -187,43 +192,21 @@
 /* Environment organization */
 #define CONFIG_ENV_SIZE			(8 * 1024)
 
-#define CONFIG_ENV_IS_IN_MMC
-
 #if defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_ENV_OFFSET		(8 * 64 * 1024)
+#define CONFIG_ENV_OFFSET		(768 * 1024)
 #endif
 
 /* Framebuffer */
-#define CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_IPUV3_CLK 260000000
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
 
-#ifndef CONFIG_SPL
-#define CONFIG_CI_UDC
 #define CONFIG_USBD_HS
-#define CONFIG_USB_GADGET_DUALSPEED
-
-#define CONFIG_USB_GADGET
-#define CONFIG_CMD_USB_MASS_STORAGE
-#define CONFIG_USB_GADGET_MASS_STORAGE
-#define CONFIG_USBDOWNLOAD_GADGET
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
-
-#define CONFIG_G_DNL_VENDOR_NUM		0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
-#define CONFIG_G_DNL_MANUFACTURER	"FSL"
-#endif
 
 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */