X-Git-Url: http://git.ipfire.org/?a=blobdiff_plain;f=include%2Fconfigs%2Fnhk8815.h;h=4d3428cb811d7d6a9d732089fb8cc5a6e9bf277a;hb=f232950f82d11d411ad29663d98851ac02fd29fb;hp=2b640dca980b14782215096bbcd88b6ffa87c98e;hpb=4b142febff71eabdb7ddbb125c7b583b24ddc434;p=people%2Fms%2Fu-boot.git

diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h
index 2b640dca98..4d3428cb81 100644
--- a/include/configs/nhk8815.h
+++ b/include/configs/nhk8815.h
@@ -4,23 +4,7 @@
  * Configuration settings for the "Nomadik Hardware Kit" NHK-8815,
  * the evaluation board for the Nomadik 8815 System on Chip.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -54,7 +38,6 @@
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT		"Nomadik> "
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE \
@@ -80,29 +63,25 @@
 #define PHYS_SDRAM_1_SIZE	0x04000000	/* 64 MB */
 #define PHYS_SDRAM_2		0x08000000	/* SDR-SDRAM BANK #2*/
 #define PHYS_SDRAM_2_SIZE	0x04000000	/* 64 MB */
-
-#define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#  define CONFIG_STACKSIZE_IRQ	(4 * 1024)	/* IRQ stack */
-#  define CONFIG_STACKSIZE_FIQ	(4 * 1024)	/* FIQ stack */
-#endif
+#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_1
+#define CONFIG_SYS_SDRAM_SIZE	(PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE)
+/* The IPL loads us at 0, tell so to u-boot. Put stack pointer 1M into RAM */
+#define CONFIG_SYS_TEXT_BASE    0x00000000
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + (1<<20))
 
 #define CONFIG_SYS_MEMTEST_START	0x00000000
 #define CONFIG_SYS_MEMTEST_END		0x0FFFFFFF
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 256 * 1024)
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* for initial data */
 
-#define BOARD_LATE_INIT		/* call board_late_init during start up */
+#define CONFIG_BOARD_LATE_INIT	/* call board_late_init during start up */
 
 /* timing informazion */
-#define CONFIG_SYS_HZ		1000 /* Mandatory... */
 #define CONFIG_SYS_TIMERBASE	0x101E2000
 
 /* serial port (PL011) configuration */
 #define CONFIG_PL011_SERIAL
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 #define CFG_SERIAL0		0x101FD000
 #define CFG_SERIAL1		0x101FB000
 
@@ -113,8 +92,11 @@
 #ifndef __ASSEMBLY__
 #include <asm/arch/gpio.h>
 #define CONFIG_CMD_I2C
-#define CONFIG_SOFT_I2C
-#define CONFIG_SYS_I2C_SPEED	400000
+#define CONFIG_SYS_I2C
+#define	CONFIG_SYS_I2C_SOFT	1	/* I2C bit-banged	*/
+#define I2C_SOFT_DEFS
+#define CONFIG_SYS_I2C_SOFT_SPEED	400000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0x7F
 #define __SDA			63
 #define __SCL			62
 #define I2C_SDA(x)		nmk_gpio_set(__SDA, x)
@@ -131,7 +113,6 @@
 #define __io(a)			((void __iomem *)(PCI_IO_VADDR + (a)))
 #define __mem_isa(a)		((a) + PCI_MEMORY_VADDR)
 
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111	/* Using SMC91c111*/
 #define CONFIG_SMC91111_BASE	0x34000300
 #undef  CONFIG_SMC91111_EXT_PHY	/* Internal PHY */