X-Git-Url: http://git.ipfire.org/?a=blobdiff_plain;f=test;h=8e61f01c126416160d256e1670ea01efe62717a6;hb=d316dba7c9d337c7122a7ff5228f1a7f598b8d7d;hp=80e1915a2cae7400551d974aa433687f87f8d060;hpb=fc092254a15f130f3ca1a15342b91534a3c4c24e;p=thirdparty%2Fmdadm.git diff --git a/test b/test index 80e1915a..8e61f01c 100755 --- a/test +++ b/test @@ -1,4 +1,4 @@ -#!/bin/sh +#!/bin/bash # # run test suite for mdadm user=`id -un` @@ -21,11 +21,19 @@ logdir="$testdir/logs" logsave=0 exitonerror=1 +echo "Testing on linux-$(uname -r) kernel" + # Check whether to run multipath tests modprobe multipath 2> /dev/null if grep -s 'Personalities : .*multipath' > /dev/null /proc/mdstat ; then MULTIPATH="yes" fi +INTEGRITY=yes +DEVTYPE=loop +LVM_VOLGROUP=mdtest + +# make sure to test local mdmon, not system one +export MDADM_NO_SYSTEMCTL=1 # assume md0, md1, md2 exist in /dev md0=/dev/md0 md1=/dev/md1 md2=/dev/md2 @@ -61,32 +69,65 @@ config=/tmp/mdadm.conf cleanup() { udevadm settle $mdadm -Ssq 2> /dev/null - for d in 0 1 2 3 4 5 6 7 8 9 10 11 12 - do + case $DEVTYPE in + loop) + for d in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 + do losetup -d /dev/loop$d ; # rm -f $targetdir/mdtest$d rm -f /dev/disk/by-path/loop* - done + done + ;; + lvm) + for d in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 + do + eval "lvremove --quiet -f \$dev$d" + done + ;; + esac +} + +ctrl_c() { + exitonerror=1 } do_setup() { - trap cleanup 0 1 2 3 15 + trap cleanup 0 1 3 15 + trap ctrl_c 2 devlist= - for d in 0 1 2 3 4 5 6 7 8 9 10 11 12 + for d in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 do sz=$size if [ $d -gt 7 ]; then sz=$ddfsize ; fi - [ -f $targetdir/mdtest$d ] || dd if=/dev/zero of=$targetdir/mdtest$d count=$sz bs=1K > /dev/null 2>&1 - [ -b /dev/loop$d ] || mknod /dev/loop$d b 7 $d - if [ $d -eq 7 ] - then - losetup /dev/loop$d $targetdir/mdtest6 # for multipath use - else - losetup /dev/loop$d $targetdir/mdtest$d - fi - eval dev$d=/dev/loop$d - eval file$d=$targetdir/mdtest$d + case $DEVTYPE in + loop) + [ -f $targetdir/mdtest$d ] || dd if=/dev/zero of=$targetdir/mdtest$d count=$sz bs=1K > /dev/null 2>&1 + [ -b /dev/loop$d ] || mknod /dev/loop$d b 7 $d + if [ $d -eq 7 ] + then + losetup /dev/loop$d $targetdir/mdtest6 # for multipath use + else + losetup /dev/loop$d $targetdir/mdtest$d + fi + eval dev$d=/dev/loop$d + eval file$d=$targetdir/mdtest$d + ;; + lvm) + unset MULTIPATH + eval dev$d=/dev/mapper/${LVM_VOLGROUP}-mdtest$d + if ! lvcreate --quiet -L ${sz}K -n mdtest$d $LVM_VOLGROUP; then + trap '' 0 # make sure lvremove is not called + eval echo error creating \$dev$d + exit 129 + fi + ;; + ram) + unset MULTIPATH + eval dev$d=/dev/ram$d + ;; + esac eval devlist=\"\$devlist \$dev$d\" + eval devlist$d=\"\$devlist\" #" <-- add this quote to un-confuse vim syntax highlighting done path0=$dev6 @@ -130,6 +171,10 @@ check() { grep -s "active $1 " /proc/mdstat > /dev/null || { echo >&2 "ERROR active $1 not found" ; cat /proc/mdstat ; exit 1;} ;; + algorithm ) + grep -s " algorithm $2 " /proc/mdstat > /dev/null || { + echo >&2 "ERROR algorithm $2 not found"; cat /proc/mdstat; exit 1;} + ;; resync | recovery | reshape) sleep 0.5 grep -s $1 /proc/mdstat > /dev/null || { @@ -144,10 +189,13 @@ check() { ;; wait ) + p=`cat /proc/sys/dev/raid/speed_limit_max` + echo 2000000 > /proc/sys/dev/raid/speed_limit_max sleep 0.1 while grep -E '(resync|recovery|reshape|check|repair) *=' > /dev/null /proc/mdstat - do sleep 2; + do sleep 0.5; done + echo $p > /proc/sys/dev/raid/speed_limit_max ;; state ) @@ -204,6 +252,10 @@ testdev() { fi } +fast_sync() { + echo 200000 > /proc/sys/dev/raid/speed_limit_max +} + rotest() { dev=$1 fsck -fn $dev >&2 @@ -219,15 +271,23 @@ do_test() { $mdadm -Ssq 2> /dev/null mdadm --zero $devlist 2> /dev/null mdadm --zero $devlist 2> /dev/null + # this might have been reset: restore the default. + echo 2000 > /proc/sys/dev/raid/speed_limit_max # source script in a subshell, so it has access to our # namespace, but cannot change it. echo -ne "$_script... " - if ( set -ex ; . $_script ) 2> $targetdir/log + if ( set -ex ; . $_script ) &> $targetdir/log then echo "succeeded" _fail=0 else - echo "FAILED - see $targetdir/log for details" + log=log + cat $targetdir/stderr >> $targetdir/log + if [ $exitonerror == 0 ]; then + log=log-`basename $_script` + mv $targetdir/log $targetdir/$log + fi + echo "FAILED - see $targetdir/$log for details" _fail=1 fi if [ "$savelogs" == "1" ]; then @@ -244,9 +304,12 @@ do_help() { echo " Options:" echo " --tests= Comma separated list of tests to run" echo " --disable-multipath Disable any tests involving multipath" + echo " --disable-integrity Disable slow tests of RAID[56] consistency" echo " --logdir= Directory to save logfiles in" echo " --save-logs Save all logs in " - echo " --no-error Don't stop on error, ie. run all tests" + echo " --keep-going Don't stop on error, ie. run all tests" + echo " --dev=[loop|lvm|ram] Use loop devices (default), LVM, or RAM disk" + echo " --volgroup= LVM volume group for LVM test" echo " setup Setup test environment and exit" echo " cleanup Cleanup test environment" echo " Run tests with " @@ -283,12 +346,27 @@ parse_args() { fi fi ;; - --no-error) + --keep-going | --no-error) exitonerror=0 ;; --disable-multipath) unset MULTIPATH ;; + --disable-integrity) + unset INTEGRITY + ;; + --dev=loop) + DEVTYPE=loop + ;; + --dev=lvm) + DEVTYPE=lvm + ;; + --dev=ram) + DEVTYPE=ram + ;; + --volgroup=*) + LVM_VOLGROUP=`expr "x$i" : 'x[^=]*=\(.*\)'` + ;; --help) do_help exit 0;