arm64: dts: allwinner: a100: add Liontron H-A133L board support

arm64: dts: allwinner: a100: add Liontron H-A133L board support

The H-A133L board is an industrial development board made by Liontron.
It contains a number of dedicated JST connectors, to connect external
peripherals. It features:

- Allwinner A133 SoC (4 * Arm Cortex-A53 cores at up to 1.6 GHz)
- 1 GiB, 2 GiB or 4 GiB of LPDDR4 DRAM
- between 16 and 128 GiB eMMC flash
- AXP707 PMIC (compatible to AXP803)
- 100 Mbit/s RJ45 Ethernet socket, using an JLSemi JL1101 PHY
- XR829 WIFI+Bluetooth chip
- 2 * USB 2.0 USB-A ports, plus three sets of USB pins on connectors
  (connected via a USB hub connected to USB1 on the SoC)
- microSD card slot
- 3.5mm A/V port
- 12V power supply
- connectors for an LVDS or MIPI-DSI panel

Add the devicetree describing the board's peripherals and their
connections.

Despite being a devboard, the manufacturer does not publish a schematic
(I asked), so the PMIC rail assignments were bases on BSP dumps,
educated guesses and some experimentation. Dropping the always-on
property from any of the rails carrying it will make the board hang as
soon as the kernel turns off unused regulators.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250505164729.18175-4-andre.przywara@arm.com
[wens@csie.org: fix property in &usbphy; fix comment typo in &usb_otg]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
[ upstream commit: a3cd12acb7b74d9b243cd893209972fc657d0bd3 ]

(cherry picked from commit 4062957c0797752dcf8b71f99c7aa47301c70aac)