ARM: dts: stm32: add goodix touchscreen on stm32mp135f-dk

ARM: dts: stm32: add goodix touchscreen on stm32mp135f-dk

Touchscreen reset needs to be configured
via the pinctrl not the driver (a pull-down resistor
has been soldered onto the reset line which forces
the touchscreen to reset state).
Interrupt line must have a pull-down resistor
in order to freeze the i2c address at 0x5D.

Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>