dt-bindings: interrupt-controller: Convert hisilicon,mbigen-v2 to DT schema

Convert the HiSilicon MBIGEN binding to DT schema format. It's a
straight-forward conversion.

Link: https://lore.kernel.org/r/20250812203327.730393-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

diff --git a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
deleted file mode 100644 (file)
index a6813a0..0000000
--- a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-Hisilicon mbigen device tree bindings.
-=======================================
-
-Mbigen means: message based interrupt generator.
-
-MBI is kind of msi interrupt only used on Non-PCI devices.
-
-To reduce the wired interrupt number connected to GIC,
-Hisilicon designed mbigen to collect and generate interrupt.
-
-
-Non-pci devices can connect to mbigen and generate the
-interrupt by writing ITS register.
-
-The mbigen chip and devices connect to mbigen have the following properties:
-
-Mbigen main node required properties:
--------------------------------------------
-- compatible: Should be "hisilicon,mbigen-v2"
-
-- reg: Specifies the base physical address and size of the Mbigen
-  registers.
-
-Mbigen sub node required properties:
-------------------------------------------
-- interrupt controller: Identifies the node as an interrupt controller
-
-- msi-parent: Specifies the MSI controller this mbigen use.
-  For more detail information,please refer to the generic msi-parent binding in
-  Documentation/devicetree/bindings/interrupt-controller/msi.txt.
-
-- num-pins: the total number of pins implemented in this Mbigen
-  instance.
-
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value must be 2.
-
-  The 1st cell is hardware pin number of the interrupt.This number is local to
-  each mbigen chip and in the range from 0 to the maximum interrupts number
-  of the mbigen.
-
-  The 2nd cell is the interrupt trigger type.
-       The value of this cell should be:
-       1: rising edge triggered
-       or
-       4: high level triggered
-
-Examples:
-
-       mbigen_chip_dsa {
-                       compatible = "hisilicon,mbigen-v2";
-                       reg = <0x0 0xc0080000 0x0 0x10000>;
-
-                       mbigen_gmac:intc_gmac {
-                               interrupt-controller;
-                               msi-parent = <&its_dsa 0x40b1c>;
-                               num-pins = <9>;
-                               #interrupt-cells = <2>;
-                       };
-
-                       mbigen_i2c:intc_i2c {
-                               interrupt-controller;
-                               msi-parent = <&its_dsa 0x40b0e>;
-                               num-pins = <2>;
-                               #interrupt-cells = <2>;
-                       };
-       };
-
-Devices connect to mbigen required properties:
-----------------------------------------------------
--interrupts:Specifies the interrupt source.
- For the specific information of each cell in this property,please refer to
- the "interrupt-cells" description mentioned above.
-
-Examples:
-       gmac0: ethernet@c2080000 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0 0xc2080000 0 0x20000>,
-                     <0 0xc0000000 0 0x1000>;
-               interrupt-parent  = <&mbigen_device_gmac>;
-               interrupts =    <656 1>,
-                               <657 1>;
-       };

diff --git a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.yaml b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.yaml
new file mode 100644 (file)
index 0000000..326424e
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/hisilicon,mbigen-v2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon mbigen v2
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: >
+  Mbigen means: message based interrupt generator.
+
+  MBI is kind of msi interrupt only used on Non-PCI devices.
+
+  To reduce the wired interrupt number connected to GIC, Hisilicon designed
+  mbigen to collect and generate interrupt.
+
+  Non-pci devices can connect to mbigen and generate the interrupt by writing
+  ITS register.
+
+properties:
+  compatible:
+    const: hisilicon,mbigen-v2
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  type: object
+  additionalProperties: false
+
+  properties:
+    interrupt-controller: true
+
+    '#interrupt-cells':
+      const: 2
+
+    msi-parent:
+      maxItems: 1
+
+    num-pins:
+      description: The total number of pins implemented in this Mbigen instance.
+      $ref: /schemas/types.yaml#/definitions/uint32
+
+  required:
+    - interrupt-controller
+    - "#interrupt-cells"
+    - msi-parent
+    - num-pins
+
+examples:
+  - |
+    mbigen@c0080000 {
+        compatible = "hisilicon,mbigen-v2";
+        reg = <0xc0080000 0x10000>;
+
+        mbigen_gmac: intc_gmac {
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            msi-parent = <&its_dsa 0x40b1c>;
+            num-pins = <9>;
+        };
+
+        mbigen_i2c: intc_i2c {
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            msi-parent = <&its_dsa 0x40b0e>;
+            num-pins = <2>;
+        };
+    };