};
/**
- * DMUB visual confirm color
+ * DMUB feature capabilities.
+ * After DMUB init, driver will query FW capabilities prior to enabling certain features.
*/
struct dmub_feature_caps {
/**
uint32_t enable_dpia: 1; /**< 1 if DPIA should be enabled */
uint32_t invalid_vbios_data: 1; /**< 1 if VBIOS data table is invalid */
uint32_t dpia_supported: 1; /**< 1 if DPIA is supported on this platform */
- uint32_t sel_mux_phy_c_d_phy_f_g: 1; /**< 1 if PHYF/PHYG should be enabled */
+ uint32_t sel_mux_phy_c_d_phy_f_g: 1; /**< 1 if PHYF/PHYG should be enabled on DCN31 */
/**< 1 if all root clock gating is enabled and low power memory is enabled*/
uint32_t power_optimization: 1;
uint32_t diag_env: 1; /* 1 if diagnostic environment */
*/
DMUB_GPINT__PSR_RESIDENCY = 9,
+ /**
+ * DESC: Notifies DMCUB detection is done so detection required can be cleared.
+ */
+ DMUB_GPINT__NOTIFY_DETECTION_DONE = 12,
+
/**
* DESC: Get REPLAY state from FW.
* RETURN: REPLAY state enum. This enum may need to be converted to the legacy REPLAY state value.
*/
DMUB_GPINT__REPLAY_RESIDENCY = 14,
-
- /**
- * DESC: Notifies DMCUB detection is done so detection required can be cleared.
- */
- DMUB_GPINT__NOTIFY_DETECTION_DONE = 12,
/**
* DESC: Updates the trace buffer lower 32-bit mask.
* ARGS: The new mask
* Command type used for all panel control commands.
*/
DMUB_CMD__PANEL_CNTL = 74,
+
/**
- * Command type used for <TODO:description>
+ * Command type used for all CAB commands.
*/
DMUB_CMD__CAB_FOR_SS = 75,
/**
* Command type used for all VBIOS interface commands.
*/
-
/**
* Command type used for all REPLAY commands.
*/
struct dmub_cmd_PLAT_54186_wa flip; /**< Flip data */
};
+/**
+ * enum dmub_cmd_mall_type - MALL commands
+ */
+enum dmub_cmd_mall_type {
+ /**
+ * Allows display refresh from MALL.
+ */
+ DMUB_CMD__MALL_ACTION_ALLOW = 0,
+ /**
+ * Disallows display refresh from MALL.
+ */
+ DMUB_CMD__MALL_ACTION_DISALLOW = 1,
+ /**
+ * Cursor copy for MALL.
+ */
+ DMUB_CMD__MALL_ACTION_COPY_CURSOR = 2,
+ /**
+ * Controls DF requests.
+ */
+ DMUB_CMD__MALL_ACTION_NO_DF_REQ = 3,
+};
+
/**
* struct dmub_rb_cmd_mall - MALL command data.
*/
PSR_VERSION_UNSUPPORTED = 0xFFFFFFFF,
};
-/**
- * enum dmub_cmd_mall_type - MALL commands
- */
-enum dmub_cmd_mall_type {
- /**
- * Allows display refresh from MALL.
- */
- DMUB_CMD__MALL_ACTION_ALLOW = 0,
- /**
- * Disallows display refresh from MALL.
- */
- DMUB_CMD__MALL_ACTION_DISALLOW = 1,
- /**
- * Cursor copy for MALL.
- */
- DMUB_CMD__MALL_ACTION_COPY_CURSOR = 2,
- /**
- * Controls DF requests.
- */
- DMUB_CMD__MALL_ACTION_NO_DF_REQ = 3,
-};
-
/**
* PHY Link rate for DP.
*/
uint32_t power_opt;
};
+/**
+ * Definition of a DMUB_CMD__SET_PSR_POWER_OPT command.
+ */
+struct dmub_rb_cmd_psr_set_power_opt {
+ /**
+ * Command header.
+ */
+ struct dmub_cmd_header header;
+ /**
+ * Definition of a DMUB_CMD__SET_PSR_POWER_OPT command.
+ */
+ struct dmub_cmd_psr_set_power_opt_data psr_set_power_opt_data;
+};
+
#define REPLAY_RESIDENCY_MODE_SHIFT (0)
#define REPLAY_RESIDENCY_ENABLE_SHIFT (1)
struct dmub_cmd_replay_set_coasting_vtotal_data replay_set_coasting_vtotal_data;
};
-/**
- * Definition of a DMUB_CMD__SET_PSR_POWER_OPT command.
- */
-struct dmub_rb_cmd_psr_set_power_opt {
- /**
- * Command header.
- */
- struct dmub_cmd_header header;
- /**
- * Definition of a DMUB_CMD__SET_PSR_POWER_OPT command.
- */
- struct dmub_cmd_psr_set_power_opt_data psr_set_power_opt_data;
-};
-
/**
* Set of HW components that can be locked.
*
*/
struct dmub_cmd_visual_confirm_color_data {
/**
- * DMUB feature capabilities.
- * After DMUB init, driver will query FW capabilities prior to enabling certain features.
+ * DMUB visual confirm color
*/
-struct dmub_visual_confirm_color visual_confirm_color;
+ struct dmub_visual_confirm_color visual_confirm_color;
};
/**
* Definition of a DMUB_CMD__GET_VISUAL_CONFIRM_COLOR command.
*/
struct dmub_rb_cmd_get_visual_confirm_color {
- /**
+ /**
* Command header.
*/
struct dmub_cmd_header header;
struct dmub_cmd_visual_confirm_color_data visual_confirm_color_data;
};
-struct dmub_optc_state {
- uint32_t v_total_max;
- uint32_t v_total_min;
- uint32_t tg_inst;
-};
-
-struct dmub_rb_cmd_drr_update {
- struct dmub_cmd_header header;
- struct dmub_optc_state dmub_optc_state_req;
-};
-
-struct dmub_cmd_fw_assisted_mclk_switch_pipe_data {
- uint32_t pix_clk_100hz;
- uint8_t max_ramp_step;
- uint8_t pipes;
- uint8_t min_refresh_in_hz;
- uint8_t pipe_count;
- uint8_t pipe_index[4];
-};
-
-struct dmub_cmd_fw_assisted_mclk_switch_config {
- uint8_t fams_enabled;
- uint8_t visual_confirm_enabled;
- uint16_t vactive_stretch_margin_us; // Extra vblank stretch required when doing FPO + Vactive
- struct dmub_cmd_fw_assisted_mclk_switch_pipe_data pipe_data[DMUB_MAX_FPO_STREAMS];
-};
-
-struct dmub_rb_cmd_fw_assisted_mclk_switch {
- struct dmub_cmd_header header;
- struct dmub_cmd_fw_assisted_mclk_switch_config config_data;
-};
-
/**
* enum dmub_cmd_panel_cntl_type - Panel control command.
*/
struct dmub_cmd_panel_cntl_data data; /**< payload */
};
+struct dmub_optc_state {
+ uint32_t v_total_max;
+ uint32_t v_total_min;
+ uint32_t tg_inst;
+};
+
+struct dmub_rb_cmd_drr_update {
+ struct dmub_cmd_header header;
+ struct dmub_optc_state dmub_optc_state_req;
+};
+
+struct dmub_cmd_fw_assisted_mclk_switch_pipe_data {
+ uint32_t pix_clk_100hz;
+ uint8_t max_ramp_step;
+ uint8_t pipes;
+ uint8_t min_refresh_in_hz;
+ uint8_t pipe_count;
+ uint8_t pipe_index[4];
+};
+
+struct dmub_cmd_fw_assisted_mclk_switch_config {
+ uint8_t fams_enabled;
+ uint8_t visual_confirm_enabled;
+ uint16_t vactive_stretch_margin_us; // Extra vblank stretch required when doing FPO + Vactive
+ struct dmub_cmd_fw_assisted_mclk_switch_pipe_data pipe_data[DMUB_MAX_FPO_STREAMS];
+};
+
+struct dmub_rb_cmd_fw_assisted_mclk_switch {
+ struct dmub_cmd_header header;
+ struct dmub_cmd_fw_assisted_mclk_switch_config config_data;
+};
+
/**
* Data passed from driver to FW in a DMUB_CMD__VBIOS_LVTMA_CONTROL command.
*/
projects / thirdparty / linux.git / commitdiff
