arm64: dts: allwinner: h313: Add Amediatech X96Q

The X96Q is a set-top box with an H313 SoC, AXP305 PMIC, 1 or 2 GiB RAM,
8 or 16 GiB eMMC flash, 2x USB A, Micro-SD, HDMI, Ethernet, audio/video
output, and infrared input.

  https://x96mini.com/products/x96q-tv-box-android-10-set-top-box

Tested, works:
- debug UART
- status LED
- USB ports in host mode
- MicroSD
- eMMC
- recovery button hidden behind audio/video port
- analog audio (line out)

Does not work:
- Ethernet (requires AC200 MFD/EPHY driver)
- WLAN (requires out-of-tree XRadio driver)
- analog video output (requires AC200 driver)
- HDMI audio/video output

Untested:
- "OTG" USB port in device mode
- built-in IR receiver
- external IR receiver

Table of regulators on the downstream kernel, for reference:

 vcc-5v      1   15      0 unknown  5000mV     0mA  5000mV  5000mV
    dcdca    0    0      0 unknown   900mV     0mA     0mV     0mV
    dcdcb    0    0      0 unknown  1350mV     0mA     0mV     0mV
    dcdcc    0    0      0 unknown   900mV     0mA     0mV     0mV
    dcdcd    0    0      0 unknown  1500mV     0mA     0mV     0mV
    dcdce    0    0      0 unknown  3300mV     0mA     0mV     0mV
    aldo1    0    0      0 unknown  3300mV     0mA     0mV     0mV
    aldo2    0    0      0 unknown   700mV     0mA     0mV     0mV
    aldo3    0    0      0 unknown   700mV     0mA     0mV     0mV
    bldo1    0    0      0 unknown  1800mV     0mA     0mV     0mV
    bldo2    0    0      0 unknown  1800mV     0mA     0mV     0mV
    bldo3    0    0      0 unknown   700mV     0mA     0mV     0mV
    bldo4    0    0      0 unknown   700mV     0mA     0mV     0mV
    cldo1    0    0      0 unknown  2500mV     0mA     0mV     0mV
    cldo2    0    0      0 unknown   700mV     0mA     0mV     0mV
    cldo3    0    0      0 unknown   700mV     0mA     0mV     0mV

Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250918-x96q-v2-2-51bd39928806@posteo.net
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 780aeba0f3a4e14d69c9602e37b8d299165507b9..2edfa7bf4ab31c4aa934da98e5e042edc9aaf600 100644 (file)
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-tanix-tx1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-x96q.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q.dts b/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q.dts
new file mode 100644 (file)
index 0000000..b2275eb
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+       model = "X96Q";
+       compatible = "amediatech,x96q", "allwinner,sun50i-h616";
+
+       aliases {
+               serial0 = &uart0;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       reg_vcc5v: vcc5v {
+               /* board wide 5V supply directly from the DC input */
+               compatible = "regulator-fixed";
+               regulator-name = "vcc-5v";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               regulator-always-on;
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+
+               key-recovery {
+                       label = "Recovery";
+                       linux,code = <KEY_VENDOR>;
+                       gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led-0 {
+                       color = <LED_COLOR_ID_BLUE>;
+                       gpios = <&pio 7 6 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+       };
+};
+
+&codec {
+       allwinner,audio-routing = "Line Out", "LINEOUT";
+       status = "okay";
+};
+
+&cpu0 {
+       cpu-supply = <&reg_dcdca>;
+};
+
+&ehci0 {
+       status = "okay";
+};
+
+&ehci3 {
+       status = "okay";
+};
+
+/* TODO: EMAC1 connected to AC200 PHY */
+
+&gpu {
+       mali-supply = <&reg_dcdcc>;
+       status = "okay";
+};
+
+&ir {
+       status = "okay";
+};
+
+&mmc0 {
+       /* microSD */
+       vmmc-supply = <&reg_aldo1>;
+       cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;  /* PF6 */
+       disable-wp;
+       bus-width = <4>;
+       status = "okay";
+};
+
+/* TODO: XRadio XR819 WLAN @ mmc1 */
+
+&mmc2 {
+       /* eMMC */
+       vmmc-supply = <&reg_aldo1>;
+       vqmmc-supply = <&reg_bldo1>;
+       non-removable;
+       cap-mmc-hw-reset;
+       mmc-ddr-1_8v;
+       mmc-hs200-1_8v;
+       max-frequency = <100000000>; /* required for stable operation */
+       bus-width = <8>;
+       status = "okay";
+};
+
+&ohci0 {
+       status = "okay";
+};
+
+&ohci3 {
+       status = "okay";
+};
+
+&r_i2c {
+       status = "okay";
+
+       axp305: pmic@36 {
+               compatible = "x-powers,axp305", "x-powers,axp805",
+                            "x-powers,axp806";
+               interrupt-controller;
+               #interrupt-cells = <1>;
+               reg = <0x36>;
+
+               x-powers,self-working-mode;
+               vina-supply = <&reg_vcc5v>;
+               vinb-supply = <&reg_vcc5v>;
+               vinc-supply = <&reg_vcc5v>;
+               vind-supply = <&reg_vcc5v>;
+               vine-supply = <&reg_vcc5v>;
+               aldoin-supply = <&reg_vcc5v>;
+               bldoin-supply = <&reg_vcc5v>;
+               cldoin-supply = <&reg_vcc5v>;
+
+               regulators {
+                       reg_dcdca: dcdca {
+                               regulator-always-on;
+                               regulator-min-microvolt = <810000>;
+                               regulator-max-microvolt = <1100000>;
+                               regulator-name = "vdd-cpu";
+                       };
+
+                       dcdcb {
+                               /* unused */
+                       };
+
+                       reg_dcdcc: dcdcc {
+                               regulator-always-on;
+                               regulator-min-microvolt = <810000>;
+                               regulator-max-microvolt = <990000>;
+                               regulator-name = "vdd-gpu-sys";
+                       };
+
+                       dcdcd {
+                               regulator-always-on;
+                               regulator-min-microvolt = <1500000>;
+                               regulator-max-microvolt = <1500000>;
+                               regulator-name = "vdd-dram";
+                       };
+
+                       dcdce {
+                               /* unused */
+                       };
+
+                       reg_aldo1: aldo1 {
+                               regulator-always-on;
+                               regulator-min-microvolt = <3300000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-name = "vcc3v3";
+                       };
+
+                       aldo2 {
+                               /* unused */
+                       };
+
+                       aldo3 {
+                               /* unused */
+                       };
+
+                       reg_bldo1: bldo1 {
+                               regulator-always-on;
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                               regulator-name = "vcc1v8";
+                       };
+
+                       bldo2 {
+                               /* unused */
+                       };
+
+                       bldo3 {
+                               /* unused */
+                       };
+
+                       bldo4 {
+                               /* unused */
+                       };
+
+                       cldo1 {
+                               /* unused */
+                       };
+
+                       cldo2 {
+                               /* unused */
+                       };
+
+                       cldo3 {
+                               /* unused */
+                       };
+               };
+       };
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_ph_pins>;
+       status = "okay";
+};
+
+&usbotg {
+       dr_mode = "host";       /* USB A type receptacle */
+       status = "okay";
+};
+
+&usbphy {
+       status = "okay";
+};