arm64: tegra: Remove OTG ID GPIO from Jetson TX2 NX

The P3509 carrier board does not connect the ID GPIO. Prior to this, the
GPIO role switch driver could not detect the mode of the OTG port.

Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
index 5f3f572ecea97e38f2d641ca9d44890b06295a06..d9aafe053112156a5818993298c5093e13b5993f 100644 (file)
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
@@ -671,7 +671,6 @@
                                        vbus-gpios = <&gpio
                                                      TEGRA186_MAIN_GPIO(L, 4)
                                                      GPIO_ACTIVE_LOW>;
-                                       id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
                                };
                        };